The fastest way: HDMI eARC or optical cable
Most Samsung TVs connect to a soundbar through one of two cables: HDMI eARC (the newer, simpler method) or a digital optical cable (the older standard that still works reliably). HDMI eARC is faster to set up because one cable carries both picture and sound, and it lets you control the soundbar volume with your TV remote. Optical cables require a separate audio connection but work on older TVs and soundbars that don't have HDMI eARC ports.
Before you plug anything in, check the back of your Samsung TV for the ports you have. Look for a port labeled HDMI eARC or HDMI ARC (usually HDMI 3 or 4 on Samsung models), or a round optical audio out port (sometimes labeled S/PDIF). Your soundbar manual will tell you which port on the soundbar receives the signal — typically labeled eARC in, optical in, or audio in.
Key Takeaways
- HDMI eARC is the simplest connection method if your TV and soundbar both have the port — it uses one cable and works with your TV remote.
- Optical cables are a reliable backup if your TV or soundbar lacks HDMI eARC, and they cost less than HDMI cables.
- After plugging in the cable, you must turn on eARC or optical audio output in your TV settings, usually under Sound or Audio Output.
- If you hear no sound, check that the soundbar input is set to the correct source and that your TV audio output is not muted or set to speakers.
- Bluetooth is an option for some Samsung soundbars but introduces slight audio delay and is best used as a backup, not a primary connection.
Setting up HDMI eARC step by step
Plug one end of an HDMI cable into the eARC port on the back of your Samsung TV and the other end into the eARC port on your soundbar. The port on the TV is usually HDMI 3 or HDMI 4 and may be labeled eARC or ARC. Power on both devices and wait 10 to 15 seconds for them to recognize each other.
On your Samsung TV remote, press the Menu button and navigate to Sound or Audio Output (the exact name varies by TV model year). Look for an option called HDMI eARC, eARC, or Digital Audio Out. Select it and make sure it is turned on. Your TV should now send sound through the HDMI cable to the soundbar. Test it by playing a video or music — you should hear sound from the soundbar, not the TV speakers.
If the soundbar does not produce sound, check that its input source is set to HDMI or eARC. Most soundbars have a button on the remote or the unit itself labeled Input or Source. Press it and cycle through until you see HDMI selected. If the soundbar still produces no sound, restart both devices by unplugging them for 30 seconds, then plugging them back in.
Using an optical cable if eARC is not available
If your TV or soundbar does not have an eARC port, a digital optical cable is the next best option. Plug one end into the optical audio out port on the back of your TV (a small round port, sometimes labeled S/PDIF or Optical Out) and the other end into the optical in port on your soundbar. The cable has a square connector on each end that only fits one way.
On your TV remote, press Menu and go to Sound or Audio Output. Look for an option called Digital Audio Out, Optical Out, or Audio Output. Select it and turn it on. Set the format to PCM if you see that option — it is the most compatible format for soundbars. Your soundbar should now receive sound from the TV.
Optical cables work well for everyday TV watching but do not support advanced audio formats like Dolby Atmos or DTS:X. If you want those features, HDMI eARC is the only wired option. For most viewers watching regular TV shows and streaming content, optical audio is sufficient and often costs less than a quality HDMI cable.
Controlling soundbar volume with your TV remote
If you use HDMI eARC, your Samsung TV remote should control the soundbar volume automatically once the connection is set up. Press the volume up or down buttons on your TV remote and watch the soundbar volume bar appear on your TV screen. If this does not happen, go back to your TV's Sound settings and look for an option called HDMI Device Control, CEC, or Anynet+. Turn it on and wait a few seconds.
With an optical cable, your TV remote will not control the soundbar volume — you will need to use the soundbar remote instead. This is a limitation of the optical connection, not a setup error. If you want remote control convenience and only have an optical connection, consider upgrading to a soundbar with HDMI eARC, or use a universal remote that can learn both devices.
Bluetooth as a backup option
Some Samsung soundbars support Bluetooth, which lets you connect without cables. To pair via Bluetooth, press the Bluetooth button on your soundbar remote or the soundbar itself until you see a pairing indicator (usually a blinking light). On your TV remote, go to Sound settings and look for Bluetooth or Wireless Speaker. Select your soundbar from the list and confirm the pairing.
Bluetooth works but introduces a slight delay between what you see on screen and what you hear from the soundbar — usually 100 to 200 milliseconds. This delay is noticeable during movies and makes lip-sync feel off. Use Bluetooth only if you cannot run a cable and do not mind the delay, or as a temporary backup while you set up a wired connection. For regular TV watching and movies, a wired connection is always better.
Troubleshooting when you hear no sound
If you plugged in the cable but hear nothing from the soundbar, work through these steps in order. First, check that the soundbar is powered on — look for a light on the front of the unit. Second, make sure the soundbar input is set to the correct source. Press the Input or Source button on the soundbar remote and cycle through the options until you see HDMI or Optical selected, depending on which cable you used.
Third, go back to your TV Sound settings and confirm that the audio output is set to HDMI eARC or Digital Audio Out, not TV Speakers or Internal Speaker. If it is set to TV Speakers, your TV is sending sound to its own speakers instead of the soundbar. Fourth, check the volume on both devices — the TV volume and the soundbar volume should both be above zero and not muted. Mute buttons are often straightforward to press by accident.
If you still hear nothing, unplug both the TV and soundbar for 30 seconds, then plug them back in and wait for them to fully restart. This clears temporary connection errors. If the soundbar has a reset button (usually a small hole on the back), hold it for 10 seconds while the soundbar is powered on. After reset, repeat the connection steps from the beginning.
Frequently Asked Questions
Do I need a special HDMI cable for eARC?
Any standard HDMI cable works for eARC — you do not need to buy an expensive "eARC cable". The eARC feature is built into the ports, not the cable. A basic HDMI 2.0 cable costs a few dollars and will work fine. Avoid very cheap cables under $5, as they may have loose connectors, but you do not need to spend more than $10 to $15.
Can I connect the soundbar to my cable box or streaming device instead of the TV?
Yes, you can run the soundbar cable to your cable box, streaming device, or game console instead of the TV. This works well if those devices have eARC or optical ports. However, connecting through the TV is simpler because one cable handles all your devices — whatever you watch on the TV automatically plays through the soundbar. If you connect directly to a device, you will need to switch cables or use a receiver when you want to watch a different input.
Why does my soundbar work with Bluetooth but not with the HDMI cable?
This usually means the TV audio output is set to TV Speakers instead of HDMI eARC. Go to Sound settings and change the audio output setting. If the setting is already correct, restart both devices. Bluetooth works as a backup because it does not depend on the TV's audio output settings — it is a separate wireless connection. If Bluetooth works but the cable does not, the problem is almost always in the TV settings, not the hardware.
Will connecting a soundbar disable my TV speakers?
No. Connecting a soundbar does not automatically turn off the TV speakers. You can control which speakers play sound through your TV settings. If you want only the soundbar to produce sound, go to Sound settings and set the audio output to HDMI eARC or Digital Audio Out. If you want both the TV speakers and soundbar to play at the same time, set the audio output to TV Speaker + eARC or a similar dual-output option if your TV offers it.
Can I use both HDMI eARC and optical at the same time?
You can plug both cables in, but your TV will only send sound through one at a time. Set the audio output to whichever connection you want to use — HDMI eARC or Digital Audio Out. The soundbar will only receive sound from the active connection. If you want to switch between them, you will need to change the TV setting each time. For simplicity, pick one connection and stick with it.