The fastest way to connect your Sony HT-S100F

The Sony HT-S100F connects to your TV using a single HDMI cable — the same type that carries picture and sound. Plug one end into the HDMI port on the back of the soundbar labeled "HDMI IN" and the other end into any HDMI port on your TV. Turn on both devices, and the soundbar will begin playing your TV's audio within seconds. This is the simplest and most reliable method.

If your TV does not have an available HDMI port, or if you prefer not to use HDMI, you can also connect using an optical digital cable (also called TOSLINK). The optical port on the soundbar is labeled "OPTICAL IN" and looks like a small square opening. This method works just as well as HDMI and carries high-quality sound, though it does not carry video like HDMI does.

Key Takeaways

  • HDMI is the easiest connection method — plug one cable into the soundbar's HDMI IN port and into your TV's HDMI port, then turn both on.
  • Optical digital cable is an alternative if you do not have a free HDMI port or prefer a separate audio connection.
  • After connecting, check your TV's audio output settings to make sure sound is routed to the soundbar instead of the TV's built-in speakers.
  • The soundbar has a power button on the remote and on the unit itself — press it to turn the device on after plugging it in.
  • If you hear no sound, verify the cable is fully inserted, the soundbar is powered on, and your TV's audio output is set to the correct port.

Connecting with HDMI step by step

Start by locating the HDMI port on the back of your soundbar. It will be labeled "HDMI IN" and sits among the other ports at the rear of the unit. Take a standard HDMI cable — the same type used for most home entertainment devices — and insert one end firmly into this port until you hear or feel a click.

Plug the other end of the HDMI cable into any available HDMI port on the back or side of your TV. Most TVs have multiple HDMI ports numbered 1, 2, 3, or 4. It does not matter which one you use. Push the cable in until it is seated completely.

Plug the soundbar into a power outlet using the included power cable. Press the power button on the soundbar or on the remote control. The soundbar will display a light on the front panel, usually blue or white, indicating it is on. Turn on your TV and begin playing audio — a show, movie, or music — and you should hear sound coming from the soundbar instead of the TV's speakers.

Using an optical digital cable instead

If you do not have a free HDMI port on your TV, or if your TV does not have HDMI ports at all, an optical digital cable is a reliable alternative. Locate the "OPTICAL IN" port on the back of the soundbar — it is a small square opening, usually next to the HDMI port. Remove the small plastic cap covering it if one is present.

Find the optical audio output port on your TV. On most TVs this is labeled "OPTICAL OUT" or "TOSLINK" and is located on the back panel. Insert one end of the optical cable into the TV's optical port and the other end into the soundbar's optical port. Both ends should click into place.

Plug in the soundbar, press the power button, and turn on your TV. The connection works the same way as HDMI — your TV's audio will play through the soundbar. Optical cables do not carry video, only sound, so you will still need HDMI or another video cable to see a picture on your TV.

Adjusting your TV's audio output settings

After connecting the soundbar, your TV may still be set to play sound through its own built-in speakers. You need to tell your TV to send audio to the soundbar instead. The exact steps vary by TV brand, but the general process is the same.

On your TV remote, press the Menu or Settings button. Look for an option called "Sound," "Audio," "Output," or "Speaker Settings." Select it. You should see a list of audio output options. If you connected via HDMI, look for "HDMI" or "HDMI ARC" and select it. If you connected via optical, look for "Optical," "Digital Audio Out," or "TOSLINK" and select it. Save your changes and exit the menu.

Play something on your TV — a streaming show, a movie, or the TV's built-in speakers test tone — and confirm you hear sound from the soundbar. If you still hear sound from the TV's speakers, return to the audio settings and double-check that the correct output is selected.

What to do if you hear no sound

If the soundbar is powered on but you hear nothing, start by checking the cable connection. Unplug the HDMI or optical cable from both the soundbar and the TV, wait a few seconds, and plug it back in firmly. Make sure both ends are fully inserted — a loose connection is the most common reason for no sound.

Next, verify that your TV's audio output is set to the soundbar. Return to your TV's sound or audio settings and confirm that the output is routed to HDMI (if you used HDMI) or Optical (if you used an optical cable). If the setting shows "TV Speaker" or "Internal Speaker," change it to match your connection type.

Check the soundbar's volume. The remote control has volume buttons, and the soundbar itself has a volume dial or buttons on the back. Make sure the volume is not set to zero or muted. Press the power button on the soundbar to confirm it is actually on — the front panel should show a light.

If you still hear no sound after these steps, try a different HDMI port on your TV if you have one available. Some TV ports are designed for video only and do not carry audio. If you have tried multiple ports and the problem persists, the cable itself may be faulty — try borrowing a different HDMI or optical cable to test.

Using the remote control and buttons

The Sony HT-S100F comes with a remote control that operates the soundbar from across the room. The power button at the top turns the soundbar on and off. The volume buttons in the middle raise and lower the sound level. Press the input button to switch between HDMI and Optical if you have both connected — the soundbar will display which input is active on its front panel.

The soundbar also has physical buttons on the back and side of the unit. You can press the power button directly on the soundbar if you do not have the remote handy. The input button on the unit itself allows you to switch between HDMI and Optical without the remote. These physical controls are useful if the remote batteries die or if you misplace the remote.

If the remote stops working, replace the batteries first — they are usually AA or AAA batteries located in a compartment on the back of the remote. If new batteries do not fix the problem, you can still operate the soundbar using the buttons on the unit itself, though you will lose the convenience of remote control.

Connecting a second device to the soundbar

The Sony HT-S100F has only one HDMI input and one optical input, so you can connect two devices at the same time — for example, your TV via HDMI and a Blu-ray player via optical. To switch between them, press the input button on the remote or on the soundbar itself. The front panel will display which input is currently active.

If you want to connect more than two devices, you will need an HDMI switch or splitter — a small box that lets you plug multiple HDMI cables into one port. These are inexpensive and widely available. Plug all your devices into the switch, then plug the switch into the soundbar's single HDMI port. Use the switch's remote or buttons to select which device you want to listen to.

Frequently Asked Questions

Do I need to turn the soundbar on every time I turn on my TV?

Yes, the soundbar does not turn on automatically when your TV turns on. You will need to press the power button on the soundbar remote or on the unit itself each time. Some soundbars have an auto-on feature that activates when they detect an audio signal, but the HT-S100F requires manual power-on.

Can I connect the soundbar to my TV wirelessly without a cable?

The Sony HT-S100F does not have Bluetooth or Wi-Fi audio connectivity, so it must be connected with a physical cable — either HDMI or optical. If you want a wireless soundbar, you would need a different model. The wired connection on this model is actually more reliable because it does not depend on wireless signal strength.

What if my TV only has one HDMI port and I need it for something else?

Use the optical digital cable instead. Your TV likely has an optical audio output port even if it has limited HDMI ports. Optical carries high-quality sound and is just as good as HDMI for audio. You can then use your single HDMI port for a streaming device, gaming console, or Blu-ray player.

Why is the soundbar showing an input but I still hear sound from the TV speakers?

Your TV's audio output setting is still routed to the TV's internal speakers instead of the soundbar. Go into your TV's sound or audio settings and change the output to match your connection — HDMI if you used HDMI, or Optical if you used an optical cable. This tells the TV to send sound to the soundbar instead of playing it internally.

Can I use both HDMI and optical cables at the same time?

Yes, you can plug both cables in simultaneously. The soundbar will play audio from whichever input is currently selected. Use the input button on the remote or the unit to switch between them. This is useful if you have multiple devices connected and want to switch between them without unplugging cables.