The basic connection process

Most Sony subwoofers connect to Sony soundbars wirelessly through a pairing process that takes about two minutes. You power on both devices, press and hold the pairing button on the subwoofer until a light blinks, then press the pairing button on the soundbar. The two devices find each other automatically and stay connected — you do not need to repeat this step unless you reset one of them.

Some older Sony models or budget soundbars use a wired connection instead. In that case, you run an audio cable from the subwoofer output on the back of the soundbar to the input on the subwoofer. Wired connections are more reliable in homes with heavy Wi-Fi interference, but they limit where you can place the subwoofer.

Before you start, check your soundbar's manual or the product page on Sony's website to confirm whether your model supports wireless pairing. The manual will also tell you exactly where the pairing buttons are located — they are sometimes hidden under a panel or marked with a small icon rather than a label.

Key Takeaways

  • Wireless pairing is the standard method: power both devices, hold the subwoofer's pairing button until it blinks, then press the soundbar's pairing button.
  • Wired connections use an audio cable from the soundbar's subwoofer output to the subwoofer's input jack on the back panel.
  • The pairing buttons are sometimes hidden under a removable panel or marked with a small symbol — check your manual to find them.
  • If pairing fails, power off both devices, wait 30 seconds, and try again; interference from other wireless devices can sometimes block the first attempt.
  • Once paired, the subwoofer remembers the soundbar and reconnects automatically when both are powered on.

Wireless pairing step by step

Start with both devices powered off. Plug in the subwoofer and the soundbar, then turn them on. Wait about 30 seconds for both to finish their startup sequence — you will see a light on each device stabilize or change color.

Locate the pairing button on the subwoofer. On most Sony models, this is a small button on the back panel, sometimes labeled "Pairing" or marked with a Bluetooth symbol. Press and hold it for about three to five seconds until the LED light on the subwoofer begins to blink — usually blue or white. The blinking means the subwoofer is in pairing mode and listening for a soundbar.

Now press the pairing button on the soundbar. This is often on the back or side of the unit, or sometimes accessed through a small hole that requires a paperclip or stylus to press. Hold it for two to three seconds. Within 10 to 15 seconds, the subwoofer's light should stop blinking and stay solid, which means pairing is complete.

Test the connection by playing sound through the soundbar. You should hear bass from the subwoofer. If you hear nothing from the subwoofer, power off both devices, wait 30 seconds, and repeat the pairing process — sometimes the first attempt fails due to interference from nearby Wi-Fi routers or other wireless devices.

Wired connection using an audio cable

If your soundbar has a subwoofer output jack, you can connect the subwoofer with a cable instead of wireless pairing. This method works well if the subwoofer is in the same room as the soundbar and you do not mind a visible cable.

Look at the back of your soundbar for a jack labeled "Subwoofer Out" or "Sub Out." It is usually a single RCA jack (a round connector) or sometimes a 3.5mm headphone-style jack. Check your soundbar's manual to confirm which type yours has. Then look at the back of the subwoofer for the matching input jack.

Plug one end of the appropriate cable into the soundbar's subwoofer output and the other end into the subwoofer's input. Power on both devices. The subwoofer should set up automatically and begin playing bass when the soundbar plays sound. No pairing button is needed for wired connections.

Troubleshooting when pairing does not work

If the subwoofer light does not blink when you press the pairing button, the device may not be in pairing mode. Try holding the button longer — some models require five to ten seconds. If the light still does not respond, power off the subwoofer completely, wait one minute, and power it back on, then try the pairing button again.

If the subwoofer blinks but never stops blinking after you press the soundbar's pairing button, the two devices may not be compatible or the soundbar may not have a pairing button. Check the model numbers on both devices against Sony's compatibility list on their support website. Some budget soundbars do not support wireless subwoofers at all and require a wired connection instead.

Wireless interference can prevent pairing. Move the soundbar and subwoofer away from your Wi-Fi router, cordless phones, or microwave ovens, which all broadcast on the same 2.4 GHz frequency that Sony uses for wireless pairing. Try pairing again once you have moved them at least six feet away from other wireless devices.

If pairing succeeds but the subwoofer cuts out during use, the devices may be too far apart. Most Sony wireless subwoofers work reliably up to about 30 feet, but walls and metal objects can reduce that range. Try moving the subwoofer closer to the soundbar or removing obstacles between them.

Adjusting subwoofer volume and settings

Once the subwoofer is connected, you can adjust its volume using the dial or buttons on the back of the subwoofer itself. Turn the dial up to increase bass or down to decrease it. Start at the middle setting and adjust from there based on what sounds right in your room — a larger room usually needs more volume than a small one.

Some Sony soundbars also let you control subwoofer volume through the soundbar's remote or app. Check your soundbar's manual to see if there is a "Subwoofer Level" or "Bass" option in the settings menu. If your soundbar has this feature, you can fine-tune the bass without walking to the back of the subwoofer.

If the subwoofer is too loud or too quiet compared to the rest of the sound, the issue is usually the volume dial on the subwoofer, not a pairing problem. Adjust it in small increments and test with music or a movie you know well.

Resetting the connection if you need to start over

If you want to pair the subwoofer with a different soundbar or reset the connection, you need to clear the pairing memory. On most Sony subwoofers, you do this by pressing and holding the pairing button for 10 to 15 seconds until the light blinks rapidly or changes color. This erases the old pairing and puts the subwoofer back into pairing mode.

After resetting, follow the wireless pairing steps again with your new soundbar or the same soundbar if you are starting fresh. The subwoofer will not reconnect to the old device once it has been reset.

If you are selling or giving away the subwoofer, always reset it first so the new owner can pair it with their own soundbar without interference from the old pairing.

Frequently Asked Questions

Can I use a Sony subwoofer with a non-Sony soundbar?

Most Sony subwoofers only pair with Sony soundbars because they use Sony's proprietary wireless protocol. Check the subwoofer's manual to see which soundbar brands it supports. If you have a non-Sony soundbar, a wired connection might work if both devices have matching audio jacks, but wireless pairing will not.

What if my soundbar does not have a pairing button?

Some Sony soundbars handle subwoofer pairing through the remote control or a settings menu instead of a physical button. Check your soundbar's manual for instructions on how to enter pairing mode. If your soundbar does not support wireless subwoofers at all, you will need to use a wired connection if your model has a subwoofer output jack.

How far can the subwoofer be from the soundbar?

Most Sony wireless subwoofers work up to about 30 feet away, but walls, metal objects, and interference from other devices can reduce that range. If the subwoofer cuts out when it is far from the soundbar, try moving it closer or removing obstacles between them.

Do I need to pair the subwoofer every time I turn it on?

No. Once paired, the subwoofer remembers the soundbar and reconnects automatically when both devices are powered on. You only need to pair them once, unless you reset the subwoofer or pair it with a different soundbar.

Can I connect two subwoofers to one Sony soundbar?

Most Sony soundbars support only one wireless subwoofer. Check your soundbar's manual to confirm. If you want two subwoofers, you may need a more advanced Sony audio system or a soundbar with multiple subwoofer outputs.