Connect the optical cable from your TV's optical output to your soundbar's optical input

An optical cable (also called a TOSLINK or digital optical cable) carries sound from your LG TV to your soundbar. The connection is straightforward: plug one end into the optical output port on the back or side of your TV, and the other end into the optical input port on your soundbar. The cable has a square connector with a small red light inside—push it in until you hear a click.

Most LG TVs have the optical output port on the back panel, usually labeled "Optical Out" or "Digital Audio Out." Soundbars typically have the optical input on the rear panel. If your soundbar is wall-mounted or sits in a tight space, you may need a right-angle optical cable adapter to avoid bending the cable sharply, which can damage it.

Once the cable is seated, you need to tell your TV to send sound through the optical port instead of the built-in speakers. This step is straightforward to miss and is the most common reason people think the connection didn't work.

Key Takeaways

  • Push the optical cable firmly into both the TV's optical output and the soundbar's optical input until you hear a click.
  • Go into your LG TV's sound settings and change the audio output from "TV Speaker" to "Optical" or "Digital Audio Out."
  • If you hear no sound, check that the soundbar is powered on and set to the correct input source (usually labeled "Optical" or "TOSLINK").
  • Optical cables work with any soundbar brand and carry both stereo and surround sound formats, making them more versatile than a 3.5mm headphone jack.

Access your LG TV's audio output settings

Pick up your LG remote and press the Settings button (usually a gear icon). Navigate to Sound or Audio—the exact menu name varies by TV model year, but it will be in the main settings menu. Look for an option called Sound Out, Audio Output, or Speaker Settings.

Inside that menu, you will see a list of audio output options. The default is usually TV Speaker. You need to change this to Optical, Digital Audio Out, or TOSLINK—the label depends on your TV model. Select that option and confirm the change. Your TV will now send all sound through the optical cable instead of its built-in speakers.

If you do not see an optical output option in the menu, your TV model may not support it, or the setting may be nested under a different name. Check your TV's manual or search the model number plus "optical output" online to confirm your TV has this port.

Turn on your soundbar and select the optical input

Power on your soundbar using its power button or remote. Most soundbars have a small LED display or light on the front that shows which input is active. Press the Input or Source button on the soundbar's remote or control panel to cycle through the available inputs.

Look for an input labeled Optical, TOSLINK, Digital In, or sometimes just a number like Input 2. Select that input. The soundbar's display should show which input is now active. If the soundbar has a manual, check it to confirm the exact name of the optical input on your model.

Once the soundbar is set to the optical input and your TV is set to send audio through the optical port, you should hear sound from the soundbar when you turn on the TV or play content. If you still hear nothing, move to the troubleshooting section below.

Test the connection with a TV program or streaming app

Turn on a TV program, movie, or streaming app with clear dialogue or music. The sound should come from the soundbar, not from the TV's built-in speakers. If you hear sound from both, go back to your TV's audio settings and confirm that the optical output is selected and the TV speaker is turned off.

Adjust the soundbar's volume using its remote or control panel. Most soundbars have a dedicated volume button. If the volume is too low or too high, use the soundbar's remote to fine-tune it. Some soundbars also let you adjust volume from the TV remote once they are connected, but this depends on the model.

Play different types of content—a movie with surround sound, a news broadcast, and music—to confirm the soundbar is handling all audio formats correctly. Optical cables support stereo, 5.1 surround sound, and some newer formats, so you should hear a noticeable improvement in sound quality compared to the TV's built-in speakers.

Troubleshoot if you hear no sound from the soundbar

If the soundbar is connected and powered on but you hear no sound, work through these steps in order. First, confirm the optical cable is fully inserted into both the TV and the soundbar—a loose connection is the most common cause. Push the cable in firmly until you hear a click on both ends.

Second, check that your TV's audio output setting is actually set to Optical or Digital Audio Out. Go back into Settings > Sound and verify the selection. Some TV models reset this setting after a software update, so it is worth double-checking even if you set it before.

Third, confirm the soundbar is set to the optical input. Press the Input or Source button on the soundbar and cycle through the options. The display should show which input is active. If the soundbar has multiple inputs (HDMI, optical, Bluetooth, aux), make sure you are on the optical one.

Fourth, check that the soundbar is actually powered on. Look for a light on the front panel or press the power button again. Some soundbars go into standby mode and need to be woken up. If the soundbar has a mute button, press it to confirm the soundbar is not muted.

If you have worked through all four steps and still hear no sound, the optical cable itself may be damaged. Try a different optical cable if you have one available. Optical cables are inexpensive and can be purchased at any electronics store. If a new cable works, the original cable was faulty.

Understand when optical is the right choice versus other connections

An optical cable is a solid choice for most LG TVs and soundbars because it carries high-quality digital audio and works with surround sound formats. It is also immune to electrical interference, so you do not have to worry about hum or noise from nearby devices. The cable itself is durable and inexpensive.

However, optical has one limitation: it does not carry video, so you cannot use it to control the soundbar from the TV remote in all cases. If your soundbar and TV support HDMI ARC (Audio Return Channel), that connection offers more control and can sometimes be simpler to set up. HDMI ARC uses a single HDMI cable instead of a separate audio cable.

Bluetooth is another option if your soundbar supports it, but it introduces a small delay and can occasionally drop the connection. Optical is more reliable for everyday use. If your TV does not have an optical output, check whether it has HDMI ARC or a 3.5mm audio output jack as an alternative.

Frequently Asked Questions

Can I use any optical cable, or do I need a special one for my soundbar?

Any standard optical cable works with any soundbar that has an optical input. They are all the same format. Buy a cable labeled "TOSLINK" or "digital optical" from any electronics retailer. Length does not matter much—a 6-foot cable is standard and costs just a few dollars. Avoid very cheap cables that feel flimsy, as they may not seat properly in the ports.

My TV has no optical output. What else can I use?

Check whether your TV has HDMI ARC, which is a newer alternative that works better in some cases. If not, look for a 3.5mm audio output jack (headphone-sized) on the back of the TV. You can use a 3.5mm-to-optical adapter cable to convert the signal. Some soundbars also have Bluetooth, which works without any cable, though it may have a slight delay.

Why does my soundbar only play sound from one side?

This usually means the TV is sending a mono or stereo signal instead of surround sound, or the soundbar is not configured to use all its speakers. Check your TV's audio settings to confirm it is set to output surround sound if available. Also check the soundbar's manual to see if it has a setting for mono versus stereo input. If the cable is loose, tighten it and try again.

Do I need to turn off the TV speakers after I connect the soundbar?

Your TV should automatically mute the built-in speakers when you select the optical output in the audio settings. If you still hear sound from both the TV and the soundbar, go back to Settings > Sound and look for an option to turn off or disable the TV speaker. On some LG models, this is a separate toggle switch.

Can I use an optical cable and HDMI ARC at the same time?

No. Your TV can only send audio through one output at a time. If you have both an optical cable and an HDMI ARC connection plugged in, the TV will use whichever one you selected in the audio settings. Choose one and stick with it. Most people find optical simpler because it requires no HDMI port on the soundbar.