The Direct Connection Path: HDMI and Audio Output
Most monitors do not have built-in speakers loud enough for comfortable viewing, which is why connecting a soundbar makes sense. The simplest route is to run an HDMI cable from your monitor's HDMI output port directly to your soundbar's HDMI input port. This works only if your monitor has an HDMI output (not input) — check your monitor's manual or the ports on the back to confirm.
If your monitor has HDMI output, plug one end into the monitor and the other into the soundbar's HDMI In port. The soundbar will receive both video and audio through that single cable. Turn on the soundbar and select HDMI as the input source using its remote or front panel buttons. This is the cleanest setup because it requires only one cable and handles audio automatically.
Many monitors, however, only have HDMI input ports — they receive the signal but do not send it back out. If that is your situation, you will need a different approach.
Key Takeaways
- Check whether your monitor has an HDMI output port (not input) by looking at the back panel or consulting the manual — most monitors only have inputs.
- If your monitor has HDMI output, connect it directly to the soundbar's HDMI input with a single cable for the simplest setup.
- If your monitor lacks HDMI output, use a 3.5mm audio cable from the monitor's headphone jack to the soundbar's audio input, or connect the soundbar to your computer instead.
- Some soundbars accept optical audio cables, which carry better sound quality than 3.5mm but require your monitor to have an optical output port.
- If your monitor has no audio output at all, the soundbar must connect to your computer or media device directly, not the monitor.
Using the 3.5mm Headphone Jack When HDMI Output Is Not Available
If your monitor only has HDMI input ports, look for a 3.5mm headphone jack on the back or side of the monitor. This jack outputs audio from whatever is plugged into the monitor's HDMI ports. Plug a 3.5mm audio cable into this jack, then plug the other end into the soundbar's audio input port (usually labeled "Aux In" or "Line In").
Set the monitor's volume to a moderate level — around 50 to 70 percent — rather than maximum. Then control the overall volume using the soundbar's remote or buttons. If you set the monitor to full volume, you lose the ability to adjust sound level from the soundbar, and the audio may distort.
This method works reliably but carries one limitation: the audio quality depends on the monitor's internal audio processing, which is often basic. You will hear a clear difference compared to connecting the soundbar directly to your computer.
Connecting the Soundbar Directly to Your Computer Instead
The best sound quality usually comes from bypassing the monitor entirely and connecting the soundbar straight to your computer. If your computer has an HDMI output port, run an HDMI cable from the computer to the soundbar's HDMI input. The computer will send both video and audio to the monitor through one cable and audio to the soundbar through another.
On Windows, right-click the volume icon in the system tray and select "Open Volume mixer" or "Sound settings." Look for the soundbar in the list of playback devices and set it as the default. On Mac, go to System Preferences > Sound > Output and select the soundbar from the list.
If your computer lacks HDMI output, use a 3.5mm audio cable from the computer's headphone jack to the soundbar's audio input. This bypasses the monitor's audio processing and gives you direct control over sound quality. Many people prefer this setup even when HDMI output is available, because it separates video and audio paths and reduces interference.
Optical Audio Cables for Higher Sound Quality
Some soundbars include an optical audio input port (also called TOSLINK or S/PDIF). Optical cables carry audio as light pulses rather than electrical signals, which reduces interference and can improve sound quality, especially over longer cable runs. If your monitor has an optical output port and your soundbar has an optical input port, this is an excellent choice.
Plug the optical cable into the monitor's optical output port and the soundbar's optical input port. The cable is keyed so it only fits one way. Set the soundbar to optical input using its remote or menu buttons. Optical connections are less common on monitors than 3.5mm jacks, so check your monitor's manual first to confirm the port exists.
Wireless Connection via Bluetooth
Many modern soundbars support Bluetooth, which eliminates cables entirely. Press and hold the Bluetooth pairing button on the soundbar (usually on the remote or the back panel) until the light blinks. On your computer, go to Settings > Bluetooth and look for the soundbar's name in the list of available devices. Click it to pair.
Bluetooth works well for casual listening but introduces a slight delay — usually 100 to 200 milliseconds — between the video on your monitor and the sound from the soundbar. This delay is barely noticeable for general use but becomes obvious during movies or games where sound and picture must sync precisely. For that reason, wired connections are preferable when available.
If you use Bluetooth, keep the soundbar within 30 feet of your computer and away from obstacles like walls or metal objects. Interference from other wireless devices (routers, microwaves, cordless phones) can cause dropouts or stuttering.
Troubleshooting No Sound or Distorted Audio
If you connect the soundbar but hear no sound, first check that the soundbar is powered on and set to the correct input source. Use the soundbar's remote to cycle through its input options (HDMI, Aux, Optical, Bluetooth) until you find the one you are using. Many soundbars default to HDMI input, so if you plugged into the Aux port, you must manually switch the input.
Next, check your computer's audio output settings. On Windows, right-click the volume icon and confirm the soundbar is selected as the default playback device. On Mac, open System Preferences > Sound > Output and verify the soundbar appears in the list. If it does not appear, the connection may be loose or the soundbar may not be recognized.
If you hear sound but it is distorted or crackling, lower the monitor's volume if you are using a 3.5mm connection. Distortion often happens when the monitor is set to maximum volume and the soundbar is also at high volume — the signal clips and breaks up. Set the monitor to 60 percent and adjust volume from the soundbar instead.
Cable Types and What to Buy
You will need different cables depending on your setup. An HDMI cable (standard or high-speed) works for any HDMI connection and costs between $5 and $15 for a quality 6-foot cable. A 3.5mm audio cable (also called an aux cable) is inexpensive, usually $3 to $8, and comes in lengths from 3 to 15 feet. An optical audio cable costs $8 to $15 and is more fragile than HDMI or 3.5mm, so handle it carefully.
Buy cables that are slightly longer than you need — it is easier to route a longer cable neatly than to stretch a short one. Avoid extremely cheap cables from unknown sellers; they often have poor shielding and introduce noise into the audio signal. Mid-range cables from established brands work reliably and cost only a few dollars more.
Frequently Asked Questions
Can I connect a soundbar to a monitor that has no audio output ports?
No, the soundbar must connect to something that outputs audio. If your monitor has no headphone jack, optical port, or HDMI output, connect the soundbar to your computer instead. Run a cable from the computer's audio output to the soundbar, and the computer will send audio to both the monitor and the soundbar.
Will connecting a soundbar to my monitor affect the video quality?
No. Audio and video travel on separate paths. Connecting a soundbar does not change what you see on the monitor or how the video signal is processed. The only change is that sound now comes from the soundbar instead of the monitor's built-in speakers.
What if my soundbar and monitor use different types of cables?
You can use an adapter to convert between cable types. HDMI-to-optical adapters and 3.5mm-to-optical adapters exist, though they add cost and complexity. It is usually simpler to connect the soundbar to your computer using a cable type both devices support, rather than chaining adapters between the monitor and soundbar.
Does the soundbar need to be the same brand as my monitor?
No. Any soundbar works with any monitor as long as the cables match. A Dell monitor pairs just as well with a Samsung soundbar as with a Dell soundbar. Brand does not matter — only the physical connection type (HDMI, 3.5mm, optical, or Bluetooth) matters.
Why is there a delay between the video and sound when I use Bluetooth?
Bluetooth introduces latency — a slight pause while the signal travels wirelessly and the soundbar processes it. This delay is inherent to Bluetooth technology and cannot be eliminated. For watching movies or playing games, use a wired connection (HDMI, 3.5mm, or optical) to keep video and audio in sync.