The fastest way: HDMI eARC or optical cable

Most Samsung TVs connect to a soundbar through one of two cables: HDMI eARC or a digital optical cable. HDMI eARC is faster to set up and handles more sound formats, so start there if your soundbar and TV both have an eARC port. If your TV or soundbar lacks eARC, optical cable is the reliable backup that works on nearly every model made in the last ten years.

Check the back or side of your Samsung TV for a port labeled "HDMI eARC," "HDMI ARC," or "eARC." If you see one, look at your soundbar for a matching port. If both have it, use an HDMI cable to connect them directly. If neither has eARC, look for a port on your TV labeled "Digital Audio Out (Optical)" — it looks like a small square hole with a red ring around it. Your soundbar should have a matching optical input port.

Once the cable is plugged in, turn on both devices. Your Samsung TV should recognize the soundbar automatically within a few seconds. If it does not, go to your TV's sound settings and select the soundbar as the audio output device.

Key Takeaways

  • HDMI eARC is the preferred connection method because it requires only one cable and supports all sound formats your TV can send.
  • Digital optical cable is a reliable alternative if your TV or soundbar does not have an eARC port.
  • After connecting the cable, navigate to your TV's sound settings and select the soundbar as the output device if it does not appear automatically.
  • Bluetooth connection works for some Samsung soundbars but may drop the signal or lose sync with the picture, so wired connection is more stable.
  • If you use a cable box, streaming device, or game console, connect it to the TV's HDMI input, not the soundbar, so the TV can send all audio to the soundbar.

Setting the soundbar as your default audio output

After the cable is connected, your Samsung TV needs to know to send sound to the soundbar instead of its built-in speakers. Press the Menu button on your TV remote and navigate to Sound or Audio Settings. Look for an option called "Sound Output," "Speaker," or "Audio Output."

Select the soundbar from the list. On most Samsung TVs, it will appear as "External Speaker" or by the soundbar's brand name if the TV recognizes it. Once you select it, the TV will send all sound through the soundbar — including dialogue from shows, sound effects from games, and audio from streaming apps.

If the soundbar does not appear in the list, unplug both devices, wait 30 seconds, and plug them back in. This resets the connection. Then check the sound settings again.

Connecting devices like cable boxes and streaming players

If you use a cable box, Roku, Apple TV, PlayStation, or Xbox, connect it to your TV's HDMI input, not directly to the soundbar. Your TV will receive the video and audio from the device, then send the audio to the soundbar through the eARC or optical cable. This keeps everything in one chain and prevents audio sync problems.

Plug the HDMI cable from your cable box or streaming device into any HDMI port on the TV labeled 1, 2, 3, or 4. Then use your TV remote to switch to that input when you want to watch. The soundbar will automatically play the audio from whatever device is connected to the TV.

Do not connect your cable box or streaming device directly to the soundbar unless the soundbar has HDMI inputs and you have no other choice. Most soundbars are designed to receive audio only, not video, so this setup will not work properly.

Bluetooth connection as a backup option

Some Samsung soundbars support Bluetooth, which means you can pair them without a cable. This is useful if you want to move the soundbar away from the TV or if your TV does not have eARC or optical ports. However, Bluetooth is less reliable than a wired connection — the signal can drop, and audio may fall out of sync with the picture on your screen.

To pair via Bluetooth, press the Bluetooth button on your soundbar remote or look for a Bluetooth input option in your TV's sound settings. Put the soundbar in pairing mode (usually by holding a button on the remote for three seconds until a light blinks). Then select the soundbar from your TV's Bluetooth device list.

Once paired, the soundbar will connect automatically when you turn it on. If the connection drops, turn the soundbar off and on again, or unpair and re-pair the devices.

Troubleshooting when the soundbar does not produce sound

If the cable is plugged in but you hear nothing from the soundbar, first check that the soundbar is powered on — look for a light on the front panel. Then check your TV's sound settings and confirm the soundbar is selected as the audio output. If it is not listed, the TV may not recognize the connection yet.

Unplug the soundbar for 30 seconds, then plug it back in. While it restarts, go to your TV's sound settings and look for an option to detect or refresh connected devices. Once the soundbar finishes restarting, it should appear in the list.

If you are using an optical cable, make sure the small plastic cap on the end of the cable is removed — many people forget this step. Also check that the cable is fully inserted into both the TV and soundbar ports; optical connections are tight and require a firm push.

If the soundbar still does not work, try a different HDMI cable or optical cable. Cables can fail, and a bad cable will prevent the connection from working even if everything else is set up correctly.

Why your TV's built-in speakers may still be on

Sometimes you will hear sound from both the soundbar and your TV's speakers at the same time. This happens when the TV's sound output is set to "TV Speaker" instead of the external soundbar. Go back to your sound settings and make sure "External Speaker" or the soundbar name is selected, not "TV Speaker."

On some Samsung models, there is also a separate setting called "TV Speaker" with an on/off toggle. Turn this off so the TV does not use its own speakers when the soundbar is connected. This prevents echo and ensures all sound comes from the soundbar only.

Frequently Asked Questions

Do I need a special HDMI cable for eARC?

No. Any standard HDMI cable works with eARC. You do not need to buy a cable labeled "eARC" — the feature is built into the port, not the cable. However, make sure the cable is in good condition and fully inserted on both ends.

Can I use both eARC and optical cable at the same time?

You can plug both cables in, but your TV will only send audio through one of them. Choose eARC if both devices support it, because it handles more sound formats and requires less setup. Optical is a good backup if eARC stops working.

Why is the sound out of sync with the picture?

Audio delay usually happens with Bluetooth connections or when the soundbar is far from the TV. Switch to a wired connection (eARC or optical) if possible. If you must use Bluetooth, check your soundbar's settings for an audio delay adjustment and increase it by 50 to 100 milliseconds until the sound matches the picture.

What if my soundbar has HDMI inputs but my TV does not have eARC?

If your soundbar has HDMI inputs and your TV does not have eARC, you can connect your cable box or streaming device to the soundbar instead of the TV, then connect the soundbar to the TV with an optical cable. The soundbar will pass video to the TV and send audio back through the optical cable. This is more complex but works if eARC is not available.

Will connecting a soundbar disable my TV's remote volume control?

No. Most Samsung TVs let you control the soundbar volume with the TV remote once the soundbar is set as the audio output. If your remote does not control the soundbar volume, check your TV's sound settings for an option called "Remote Control Volume" or "HDMI Device Control" and turn it on.