Connect the optical cable to both devices

An optical cable (also called a TOSLINK or digital optical cable) carries sound from your Samsung TV to your soundbar. The connection takes about two minutes and requires no power or setup software.

Locate the optical port on the back of your Samsung TV. It is a small square opening, usually labeled "Digital Audio Out" or "Optical Out". Insert one end of the optical cable into this port until you hear or feel a click. The cable has a rectangular connector that only fits one way — do not force it.

Plug the other end of the optical cable into the optical port on your soundbar. This port is typically on the back panel. Again, push until the connector clicks into place. Both ends should be fully seated before you move to the next step.

Key Takeaways

  • Optical cables carry digital sound from your TV to the soundbar and require no power source or software installation.
  • Both your Samsung TV and soundbar must have optical ports — check the back panels before buying a cable.
  • After connecting the cable, you must tell your TV to send sound through the optical port instead of its built-in speakers.
  • If you hear no sound, check that the soundbar is powered on and set to the correct input, then verify the TV's audio output setting.

Set your Samsung TV to output sound through the optical port

Connecting the cable alone does not turn on the optical output. Your TV still sends sound to its own speakers by default. You must change this in the TV's settings.

Press the Menu button on your Samsung remote. Navigate to Sound or Audio (the exact name varies by model year). Look for an option called "Sound Output", "Audio Output", or "Speaker Settings". Select it.

You will see a list of output options. Choose "Optical" or "Digital Audio Out". Do not select "TV Speaker" or "Internal Speaker". Once you select Optical, the TV will send all sound through the cable to your soundbar instead of playing it through the TV's built-in speakers.

Exit the menu. Test the connection by turning up the volume on your soundbar and playing content on the TV. You should hear sound from the soundbar, not the TV itself.

Verify the soundbar is set to receive optical input

Most soundbars default to optical input, but some have multiple input options. Check your soundbar's front panel or remote for an input button or display.

Press the input or source button on the soundbar or its remote. Cycle through the available inputs until you see "Optical", "Digital", or "TOSLINK" highlighted. If the soundbar displays the input name on its front panel, you should see it change as you cycle through.

Once optical is selected, the soundbar will listen only to the optical cable. If you later want to use a different input (such as Bluetooth or HDMI), you will need to switch it manually using the same button.

Troubleshoot if you hear no sound

If the soundbar is connected and the TV is set to optical output but you still hear nothing, work through these steps in order.

First, check that the soundbar is powered on. Look for a power light on the front panel. If it is off, press the power button on the soundbar or its remote. Many soundbars turn off automatically after 15 to 20 minutes of no input, so power it back on and test again.

Second, verify the soundbar is set to optical input. Press the input button on the soundbar remote and confirm "Optical" is selected. If it shows a different input, switch to Optical.

Third, go back to your TV's Sound or Audio settings and confirm the output is still set to Optical, not TV Speaker. Some TV updates or power cycles can reset this setting to the default.

Fourth, inspect both ends of the optical cable. Make sure each connector is fully clicked into its port and the cable is not bent or damaged. If the cable looks worn or kinked, try a different optical cable if you have one available.

Understand what optical cables do and do not carry

Optical cables transmit digital audio only — they do not carry video or control signals. This means the soundbar receives sound from your TV but cannot control the TV's volume or power.

You will adjust soundbar volume using the soundbar's remote or buttons, not the TV remote. Some Samsung TV remotes have a "Sound Control" or "Soundbar Control" feature that works over Bluetooth or WiFi, but this is separate from the optical connection and must be set up in the TV's Bluetooth settings if your soundbar supports it.

Optical cables also do not support newer audio formats like Dolby Atmos or DTS:X on most Samsung TVs. If your TV and soundbar both support these formats, you may get better results using an HDMI eARC connection instead, though that requires a different setup.

Choose the right optical cable if you need to replace yours

Optical cables are inexpensive and widely available. Any standard optical cable works — there is no "premium" version that sounds better. Look for a cable labeled "Toslink" or "Digital Optical" at any electronics retailer.

Cable length matters only for convenience. A 6-foot cable is standard for most living rooms. If your soundbar sits far from your TV, measure the distance and buy a cable that reaches comfortably without stretching tight.

Avoid coiling the cable tightly or pinching it under furniture. Optical cables are fragile inside and can break if bent sharply. A loose coil or cable tie keeps it safe and makes it easier to disconnect later if you need to move the soundbar.

Frequently Asked Questions

Can I use an optical cable if my soundbar does not have an optical port?

No. If your soundbar has only Bluetooth, HDMI, or USB ports, you cannot use an optical cable. Check the back and sides of your soundbar for a small square port labeled "Optical" or "Toslink". If it is not there, you will need to use a different connection method.

Will the optical cable work if my TV does not have an optical port?

No. Older Samsung TVs and some budget models do not include optical output. Check the back panel of your TV for a small square port. If your TV has no optical port, you can use HDMI eARC, Bluetooth, or a 3.5mm audio cable instead, depending on what your soundbar supports.

Do I need to turn off my TV or soundbar before plugging in the optical cable?

No. You can safely connect or disconnect an optical cable while both devices are powered on. However, you may not hear sound until you set the TV's audio output to Optical in the Sound settings menu.

Why does my soundbar only play sound from some apps or inputs on the TV?

Some streaming apps or TV inputs may have their own audio settings that override the TV's optical output setting. Check the app's audio settings or the input's menu to confirm it is not muted or set to a different output. You can also try restarting the TV to reset these settings.

Can I use an optical cable and Bluetooth at the same time?

Most soundbars can receive audio from only one input at a time. If the soundbar is set to Optical, it will ignore Bluetooth signals. To switch inputs, use the soundbar's remote or buttons. Some soundbars have an auto-detect feature that switches inputs automatically when it detects a signal, but this varies by model.