Connect the aux cable from your TV's audio output to your soundbar's audio input
An aux cable (also called a 3.5mm jack cable or headphone cable) runs a direct audio signal from your TV to your soundbar. One end plugs into your TV's audio output port, and the other end plugs into your soundbar's audio input port. This is one of the most straightforward ways to get sound from your TV to your soundbar, and it works with nearly every TV and soundbar model made in the last 15 years.
The process takes about two minutes and requires no setup menus or pairing. Once plugged in, your soundbar will play whatever audio your TV is playing—whether that's a streaming service, cable box, or built-in apps.
Key Takeaways
- An aux cable connects your TV's headphone or audio output jack to your soundbar's audio input jack using a standard 3.5mm connector.
- You need to locate the correct ports on both your TV and soundbar before you plug anything in, since port locations vary by model.
- Once connected, you may need to change your TV's audio output setting so sound goes to the aux port instead of the TV's built-in speakers.
- If your TV has no audio output jack, you can use an HDMI adapter or optical cable instead, but aux is the simplest option when available.
Locate the audio ports on your TV and soundbar
Before you plug anything in, you need to find where the cables go. On your TV, look for a port labeled "Audio Out," "Headphone Out," or "Line Out." On older TVs this is usually a 3.5mm jack (the same size as a headphone jack) on the back or side panel. Some newer TVs have moved this port to the bottom edge. Check your TV's manual or the manufacturer's website if you cannot find it—search for your exact model number.
On your soundbar, look for a port labeled "Audio In," "Line In," or "Aux In." This is almost always on the back of the soundbar, sometimes next to other ports like USB or optical. If your soundbar has multiple input ports, the aux port is usually the 3.5mm jack, not the larger optical port. Again, your soundbar's manual will show you exactly where it is if you are unsure.
Write down or take a photo of both port locations so you know what you are looking for when you move the TV and soundbar into position.
Get the right aux cable and plug it in
You need a 3.5mm aux cable—the same type used for headphones. These are inexpensive and sold at any electronics store or online. The cable has a small metal connector on each end. Make sure the cable is long enough to reach from your TV to your soundbar without stretching tight; a 6-foot cable is usually safe.
Plug one end into your TV's audio output port and the other end into your soundbar's audio input port. Push each connector in until you hear or feel a small click. The connection should be snug, not loose. If the cable falls out easily, you may have the wrong port or the wrong type of cable.
Turn on your TV and soundbar. You should hear sound coming from the soundbar instead of the TV's built-in speakers. If you hear nothing, move to the next section.
Change your TV's audio output setting
Many TVs are set to play sound through their built-in speakers by default, even when an aux cable is plugged in. You need to tell your TV to send sound to the aux port instead. This setting is usually in your TV's audio or sound menu.
On most TVs, press the Menu or Settings button on your remote, then look for "Sound," "Audio," or "Speaker" settings. You should see an option like "Audio Output," "Speaker Output," or "Sound Output." Select it and choose "Headphone," "Line Out," "Aux," or "External Speaker"—the exact wording depends on your TV brand. Do not choose "TV Speaker" or "Internal Speaker."
If you cannot find this setting, search online for "[your TV brand and model] audio output settings" or check your TV's manual. Samsung, LG, Sony, and Vizio all have this setting, but the menu path is different for each brand.
Test the connection and adjust volume
Once you have changed the audio output setting, play something on your TV—a streaming app, a cable channel, or a movie. You should hear sound from the soundbar. If the sound is too quiet or too loud, adjust the volume using your soundbar's remote or buttons, not your TV remote. The TV's volume control may not work properly when sound is routed through aux.
If you still hear nothing, check that both cable connections are fully inserted and that you selected the correct audio output port on your TV. If your TV has both a headphone jack and an audio output jack, try the other one. Some TVs label these differently, and you may have plugged into the wrong one.
What to do if your TV has no audio output port
Newer flat-screen TVs sometimes skip the audio output jack to save space. If your TV has no aux port, you have two options. The first is to use an HDMI audio extractor, a small device that plugs into your TV's HDMI port and pulls the audio signal out so you can connect it to your soundbar with an aux cable. These cost $15 to $30 and work well, but they add another device to your setup.
The second option is to use an optical cable instead of aux, if your soundbar has an optical input port. Optical cables carry audio signals and are built into many newer TVs. This method often sounds slightly better than aux and is just as straightforward to set up. If your soundbar does not have an optical port, the HDMI extractor is your best choice.
Common mistakes to avoid
The most common mistake is plugging the aux cable into the wrong port. A TV may have a headphone jack (for listening privately) and a separate audio output jack (for sending sound to speakers). These look identical but serve different purposes. If sound does not work, try the other port.
Another mistake is forgetting to change your TV's audio output setting. The cable can be plugged in correctly, but if your TV is still set to play through its built-in speakers, you will hear nothing from the soundbar. Always check this setting first if there is no sound.
Do not use a microphone cable or instrument cable by mistake. These look similar to aux cables but have different internal wiring and will not carry audio properly. Buy a cable labeled "3.5mm aux" or "3.5mm stereo jack" to be sure.
Frequently Asked Questions
Can I use any 3.5mm cable, or does it have to be a special audio cable?
A standard 3.5mm aux cable works fine. You do not need an expensive or "premium" cable. Any cable labeled "3.5mm stereo" or "3.5mm aux" from any brand will work the same way. Avoid microphone cables or instrument cables, which have different wiring inside.
Why is my soundbar playing sound but it is very quiet?
Check that your TV's volume is turned up and that your soundbar's volume is also turned up. Some TVs reduce the audio output level when using the aux port. If both are at reasonable levels and sound is still quiet, try adjusting your TV's audio output setting—some TVs have a separate volume slider for the aux output that may be set low.
Can I use aux if my TV is connected to a cable box or streaming device?
Yes. As long as the audio signal goes through your TV first, the aux cable will carry that signal to your soundbar. If you want to connect the cable box or streaming device directly to the soundbar instead, you would need aux cables from those devices, not from the TV.
Will aux cable sound quality be worse than HDMI or optical?
For most home viewing, aux, optical, and HDMI all sound the same to human ears. Aux is slightly more prone to interference if the cable runs near power lines or other electronics, but in a typical living room this is not noticeable. If sound quality matters to you, optical is a slightly safer choice, but aux is perfectly fine.
Do I need to turn off my TV and soundbar before plugging in the aux cable?
It is safer to turn both off first, but not required. Plugging in an aux cable while devices are on will not damage anything. However, turning them off first prevents any sudden loud noise that might startle you when the connection is made.