Connect the soundbar to a regular HDMI input on your TV, then run audio from the TV back to the soundbar through a separate cable

If your TV doesn't have HDMI ARC (audio return channel) or your soundbar doesn't support it, you can still use HDMI to send video to the TV while routing sound to the soundbar. The setup uses two cables: HDMI carries the video signal from your source device to the TV, and a second cable—usually optical or 3.5mm audio—carries sound from the TV back to the soundbar. This method works reliably and doesn't require any special TV features.

The key difference from ARC is that you're using two separate paths for video and audio instead of one bidirectional HDMI cable. Your TV must have an optical audio output or a 3.5mm headphone jack for this to work. Most TVs made in the last ten years have at least one of these.

Key Takeaways

  • Connect your source device (cable box, streaming device, game console) to the TV's HDMI input, not the soundbar.
  • Run an optical or 3.5mm audio cable from your TV's audio output to the soundbar's audio input.
  • Set your TV's audio output to external speakers or optical audio in the settings menu.
  • You will need to check your soundbar's manual to confirm which audio input it has and how to switch to it.
  • This setup works with any HDMI input on the TV—you don't need a special port.

What cables and connections you need

You need three things: an HDMI cable, an audio cable, and a soundbar with an audio input. The HDMI cable carries video from your source (cable box, Roku, Apple TV, PlayStation, etc.) to any HDMI port on the TV. The audio cable is either optical (a thin fiber-optic cable with a square connector) or 3.5mm (a standard headphone-style jack). Check your soundbar's back panel or manual to see which one it has—most modern soundbars have optical, but some have 3.5mm, and a few have both.

Your TV must have an audio output that matches your soundbar's input. Look at the back or side of your TV for a port labeled "Optical Out," "Audio Out," "Headphone," or "3.5mm." If your TV has neither, you cannot use this method—you would need to connect the soundbar directly to your source device instead, or use a different connection type like HDMI ARC on a newer TV.

Do not connect the soundbar to the TV's HDMI ports. HDMI on a soundbar is for passing video through to the TV, not for receiving audio from it. If your soundbar has HDMI inputs, they are meant for connecting source devices directly to the soundbar, which then sends video to the TV—a different setup altogether.

Step-by-step connection process

Step 1: Connect your source device to the TV. Plug the HDMI cable into any HDMI port on the back or side of your TV. Plug the other end into your cable box, streaming device, game console, or whatever device you're using. It doesn't matter which HDMI port you use on the TV.

Step 2: Connect the audio cable from the TV to the soundbar. Plug one end of the optical or 3.5mm cable into your TV's audio output port. Plug the other end into the matching input on the soundbar. Make sure the cable is fully seated in both ports—a loose connection will cause no sound or crackling.

Step 3: Set the TV's audio output to external speakers. On your TV remote, open the Settings menu (sometimes called Setup or Menu). Look for Audio, Sound, or Speaker settings. Find the option for audio output or external speakers and change it from "TV Speaker" or "Internal" to "Optical Out," "Audio Out," or "External Speakers"—the exact name varies by TV brand. Save and exit.

Step 4: Switch the soundbar to the correct input. On the soundbar itself or its remote, select the input that matches the cable you used—usually labeled "Optical" or "Aux" (for 3.5mm). Some soundbars cycle through inputs with a button on the back or a remote control. Refer to your soundbar's manual if you're unsure which button to press.

Step 5: Test the sound. Turn on your source device and play something with audio. You should hear sound from the soundbar. If you don't, go back to Step 3 and double-check that the TV's audio output is set to external speakers, not the TV's built-in speakers.

Why this setup works without ARC

HDMI ARC is a feature that lets one cable carry both video and audio in both directions at the same time. Without it, you need separate paths: video goes one way (source to TV via HDMI), and audio goes another way (TV to soundbar via optical or 3.5mm). This is actually simpler than ARC in some ways—there's less to go wrong because each cable does one job.

The trade-off is that your TV must have an audio output port, and you need an extra cable. Most TVs do have these ports, but some newer budget models or very thin TVs skip them to save space. If your TV has neither optical nor 3.5mm output, you cannot use this method. In that case, you would need to connect your source devices directly to the soundbar (if it has HDMI inputs) or use a different TV model.

Troubleshooting when you have no sound

If you've followed all the steps and still hear nothing, check these things in order. First, make sure the audio cable is plugged in firmly at both ends—wiggle it gently to confirm it's seated. Second, go back to your TV's audio settings and verify that the output is set to external speakers or optical, not TV speaker. Third, check that the soundbar is switched to the correct input (Optical or Aux) and that the volume is turned up on the soundbar itself.

If the soundbar has a display or light, look for an input indicator that shows which input is active. If it shows the wrong input, press the input button on the soundbar or its remote to cycle to the correct one. Some soundbars default to HDMI input and won't play audio from optical unless you manually switch it. If you still have no sound after checking all of these, the audio cable may be damaged—try a different optical or 3.5mm cable to rule that out.

When to connect the soundbar directly to your source instead

If your soundbar has HDMI inputs and your source device is close enough to the soundbar, you can skip the TV entirely for audio. Connect the source device to the soundbar's HDMI input, then connect the soundbar's HDMI output to the TV. The soundbar will pass video through to the TV while keeping audio for itself. This method often sounds better because the audio doesn't have to travel through the TV first.

This setup works well if you have one main source device (like a cable box or streaming device) that stays in one place. It's less convenient if you have multiple devices or if the soundbar is far from your source equipment. Check your soundbar's manual to see if it has HDMI inputs and whether it supports this pass-through mode.

Frequently Asked Questions

Can I use both the TV speaker and the soundbar at the same time?

No. When you set the TV's audio output to external speakers, the TV's built-in speaker turns off. If you want sound from both, you would need to use a different setup, such as connecting the soundbar directly to your source device while leaving the TV speaker on. This is rarely necessary and usually creates an echo.

Does the quality of the audio cable matter?

For optical cables, quality matters less than for HDMI—a cheap optical cable works as well as an expensive one. For 3.5mm, a better-shielded cable can reduce interference if you're running it near power cables, but most standard 3.5mm cables work fine. Buy a cable that's long enough to reach from your TV to your soundbar without stretching.

What if my TV has no audio output at all?

If your TV has no optical or 3.5mm output, you cannot use this method. Your options are to connect the soundbar directly to your source device (if it has HDMI inputs), use a different TV, or check whether your TV has HDMI ARC on one of its ports—some TVs have ARC on only one specific HDMI port, usually labeled HDMI 3 or HDMI 4.

Do I need to change any settings on my source device?

No. Your cable box, streaming device, or game console sends audio and video to the TV normally. The TV then routes the audio to the soundbar. You only need to adjust settings on the TV and soundbar, not on the source device itself.

Will this work with a soundbar that has Bluetooth?

Yes, but Bluetooth is a separate connection. If your soundbar has both optical and Bluetooth, you can use optical to the TV (as described here) or pair it to your phone via Bluetooth for music. The optical connection is for your TV's audio, and Bluetooth is for your phone or tablet.