Optical cables carry sound from your TV to the soundbar through a single, thin fiber-optic line

An optical cable (also called a TOSLINK or S/PDIF cable) sends digital audio from your TV to your soundbar. The cable plugs into the optical audio output on your TV and the optical audio input on your soundbar. This is one of the most reliable ways to connect a soundbar because the signal doesn't degrade over distance, and it works with nearly every TV and soundbar made in the last 15 years.

The optical port looks like a small square or rectangular opening, usually about the size of a headphone jack. It has a little door or cap that you push open to insert the cable. The cable itself is thinner than an HDMI cable and has a red or black plastic connector on each end.

Key Takeaways

  • Locate the optical audio output port on your TV (usually labeled "Optical Out" or "TOSLINK") and the optical input on your soundbar.
  • Insert the optical cable firmly into both ports until you hear or feel a click, then turn on both devices.
  • Go into your TV's audio settings and select optical audio as the output method so sound routes through the cable instead of the TV's speakers.
  • If you hear no sound, check that the optical cable is fully seated, the soundbar is powered on, and your TV's audio output setting is correct.

Finding the optical ports on your TV and soundbar

The optical output port on your TV is usually on the back panel, sometimes on the side. Look for a small square or rectangular opening with a label that says "Optical Out," "TOSLINK," "S/PDIF," or sometimes just "Audio Out." If your TV has multiple audio ports, the optical one will be distinct from the red and white RCA jacks (which are round) and the 3.5mm headphone jack (which is round and smaller).

On your soundbar, the optical input port is typically on the back or bottom. Check your soundbar's manual or look for the same square opening labeled "Optical In" or "TOSLINK In." Some soundbars have multiple input options on a single panel, so make sure you're using the optical port and not the HDMI, USB, or auxiliary input.

If you cannot find an optical port on your TV, it may not have one—older flat-screens and some budget models skip this feature. Newer TVs almost always include it. If your soundbar lacks an optical input, you will need to use a different connection method, such as HDMI ARC or a 3.5mm auxiliary cable.

Inserting the optical cable and powering on

Hold the optical cable by its connectors (the plastic ends) and gently push one end into the optical output port on your TV. You should feel slight resistance, and the connector will click into place when it is fully seated. Do not force it—if it does not slide in smoothly, check that you are aiming straight into the port and that the cable is not bent.

Insert the other end of the optical cable into the optical input port on your soundbar the same way. Again, you should feel a click. Both connectors should sit flush with the ports, not sticking out.

Turn on your TV and soundbar. Most soundbars have a power button on the remote or the unit itself. Some soundbars turn on automatically when they detect an audio signal, but it is safer to power them on manually first.

Configuring your TV's audio output settings

Your TV will not automatically send sound through the optical cable unless you tell it to. You need to go into the TV's audio settings and select the optical port as the audio output. The exact steps vary by TV brand, but the process is similar across most models.

On most TVs, press the Menu or Settings button on your remote. Look for an option called "Sound," "Audio," "Output," or "Speaker Settings." Inside that menu, find a setting for "Audio Output" or "Speaker Output." You should see options like "TV Speaker," "Optical," "HDMI ARC," or "External Speaker." Select "Optical" or "Optical Out."

Some TVs also have a setting called "Digital Audio Format" or "Audio Format." If you see this, set it to "PCM" (Pulse Code Modulation) unless your soundbar manual specifies otherwise. PCM is the most compatible format and works with all soundbars.

Save your changes and exit the menu. Sound should now come through the soundbar instead of the TV's built-in speakers.

Testing the connection and adjusting volume

Play something on your TV—a streaming app, a broadcast channel, or a movie. You should hear sound coming from the soundbar. If you hear nothing, do not assume the cable is bad; there are several things to check first.

First, make sure the soundbar is powered on and the volume is turned up. Many soundbars have a separate volume control on the remote or the unit itself. If the soundbar volume is at zero, you will hear nothing even if the connection is correct.

Next, verify that the optical cable is fully inserted into both ports. Gently push on each end to confirm it is seated all the way. A cable that is only partially inserted will not carry a signal.

Finally, go back into your TV's audio settings and confirm that "Optical" is still selected as the audio output. Sometimes TV settings revert after a restart or software update.

What to do if you hear no sound

If you have checked the volume, the cable seating, and the TV's audio output setting and still hear nothing, try a different optical cable if you have one available. Optical cables can fail, especially if they have been bent sharply or sat in a hot environment for a long time. A faulty cable is one of the most common reasons for a silent connection.

If a different cable works, your original cable is damaged and should be replaced. Optical cables are inexpensive (usually $5 to $15) and widely available online and in electronics stores.

If a different cable does not help, the optical port on your TV or soundbar may be damaged. This is less common but can happen if something was forced into the port or if the port was exposed to moisture. If you suspect a hardware problem, contact the manufacturer or consider using an alternative connection method like HDMI ARC or Bluetooth.

When to use optical instead of other connection methods

Optical is a solid choice if your TV and soundbar both have the ports and you want a straightforward, reliable connection. It works well for streaming, broadcast TV, and movies. However, it has one limitation: it does not carry the newest surround sound formats like Dolby Atmos or DTS:X. If your soundbar supports these formats and your TV can output them, HDMI ARC is a better option.

Optical is also a good backup if your TV's HDMI ARC port is not working or if your soundbar does not have HDMI input. It is more stable than Bluetooth over long distances and does not require pairing or battery power.

If your TV or soundbar lacks an optical port, you can still connect them using HDMI ARC (if both have it), a 3.5mm auxiliary cable, or Bluetooth. Each method has trade-offs in terms of sound quality, ease of setup, and format support.

Frequently Asked Questions

Can I use an optical cable if my TV is wall-mounted far from the soundbar?

Yes. Optical cables work over long distances without signal loss—you can run a 25-foot or 50-foot optical cable if needed. The cable will not degrade the audio quality no matter how long it is. Just make sure the cable is not kinked or pinched, and keep it away from sources of heat.

Do I need to adjust any settings on the soundbar itself?

Most soundbars detect the optical signal automatically and switch to that input without any manual adjustment. Check your soundbar's manual to see if there is an input selection button on the remote or the unit. If the soundbar has multiple input options, you may need to press an "Input" or "Source" button to select optical, but many models do this automatically.

Will the optical cable work if my TV is a smart TV or a newer model?

Yes, nearly all TVs made in the last 15 years have an optical output port, including smart TVs, 4K TVs, and the latest models. The only exception is some very budget or very old TVs. If you are unsure whether your TV has an optical port, check the back panel or consult your TV's manual.

What if my soundbar has optical input but my TV does not have optical output?

If your TV lacks an optical port, you can use HDMI ARC (if both devices support it), a 3.5mm auxiliary cable connected to the TV's headphone jack, or Bluetooth. HDMI ARC is the best alternative because it carries better sound quality and supports more formats than auxiliary cables.

Can I use the same optical cable for multiple devices?

Yes. You can unplug the optical cable from your TV and soundbar and use it to connect a different device, such as a Blu-ray player or gaming console, to the soundbar. Optical cables are not device-specific and will work with any equipment that has optical ports.