The main ways to connect without HDMI

You can connect a soundbar to your TV using optical cable, Bluetooth, or analog audio cables — all three work without HDMI. Optical cable (also called TOSLINK) carries a digital audio signal and is the most reliable of the three. Bluetooth is wireless and convenient but can occasionally drop the connection. Analog cables (the red and white RCA connectors, or a 3.5mm headphone jack) work with older TVs and soundbars but carry lower-quality audio than digital methods.

Which method works for you depends on what ports your TV and soundbar actually have. Check the back and sides of both devices before you buy cables or attempt a connection. Most modern soundbars have at least two of these three options built in.

Key Takeaways

  • Optical cable is the most stable non-HDMI connection and works with nearly all modern soundbars and TVs.
  • Bluetooth is wireless but can occasionally disconnect, and your TV must have Bluetooth built in or you will need a separate Bluetooth adapter.
  • Analog audio cables (RCA or 3.5mm) work with older equipment but deliver lower sound quality than optical or Bluetooth.
  • You may need to change your TV's audio output settings after connecting to tell it to send sound to the soundbar instead of its own speakers.

Connecting with an optical cable

An optical cable is a thin fiber-optic cord with a square or rectangular connector on each end. One end plugs into your TV's optical audio output port (usually labeled "TOSLINK" or "Optical Out"), and the other end plugs into your soundbar's optical input. The cable itself costs between $5 and $15 and is available at any electronics retailer.

After you plug in the cable, go to your TV's settings menu and find the audio or sound section. Look for an option called "Audio Output" or "Sound Output" and change it from "TV Speaker" or "Internal Speaker" to "Optical" or "External Speaker." The exact wording varies by TV brand — Samsung calls it "Sound Output," LG calls it "Audio Out," and Vizio calls it "Audio Output." Your soundbar should begin playing sound when ready once you make this change.

Optical cable is reliable because it carries a digital signal that does not degrade over distance, and it does not require pairing or charging. The main limitation is that the cable must run between your TV and soundbar, so it works best if they sit close together or if you can hide the cable behind furniture.

Connecting with Bluetooth

Bluetooth is wireless, so no cable runs between the TV and soundbar. However, your TV must have Bluetooth built in — many older TVs do not. To check, go to your TV's settings menu and look for a Bluetooth or Wireless section. If it exists, your TV has Bluetooth.

To pair your soundbar, turn on the soundbar and put it in pairing mode. Most soundbars enter pairing mode when you hold down a button labeled "Bluetooth" or "Pair" for three to five seconds — check your soundbar's manual for the exact button and timing. Then go to your TV's Bluetooth settings, select your soundbar from the list of available devices, and confirm the pairing. Once paired, your TV will connect to the soundbar automatically whenever both are turned on.

Bluetooth is convenient because you do not need cables, but it has two drawbacks. First, the connection can occasionally drop, especially if the soundbar and TV are far apart or if other wireless devices are nearby. Second, Bluetooth audio has a slight delay, which you may notice if you watch movies — the sound will lag slightly behind the picture. This delay is usually small enough not to bother most people, but it is noticeable on some soundbars and some TVs.

If your TV does not have Bluetooth, you can buy a Bluetooth transmitter that plugs into your TV's optical or analog audio output and sends the signal to your soundbar wirelessly. These devices cost $20 to $50 and are sold under names like "Bluetooth audio transmitter" or "Bluetooth adapter for TV."

Connecting with analog audio cables

Analog cables come in two types: RCA cables (the red and white connectors) and 3.5mm headphone jacks (the small round connector). These are the oldest audio connection method and work with nearly all TVs and soundbars, including very old models. A set of RCA cables costs $3 to $8, and a 3.5mm cable costs $2 to $5.

To connect with RCA cables, plug the red and white connectors into your TV's audio output ports (labeled "Audio Out" or "RCA Out") and the other end into your soundbar's audio input ports. If your TV has a 3.5mm headphone jack instead, use a 3.5mm cable to connect it to your soundbar's 3.5mm input, or use an adapter cable that converts 3.5mm to RCA.

After connecting, go to your TV's audio settings and change the output from "TV Speaker" to "Audio Out" or "External Speaker." The soundbar should then play your TV's audio. Analog cables are reliable and work with older equipment, but they carry lower-quality audio than optical or Bluetooth, especially over long distances. Use analog only if your TV and soundbar do not have optical or Bluetooth ports.

Changing your TV's audio output settings

No matter which connection method you use, your TV will not automatically send sound to the soundbar — you have to tell it to. Go to your TV's main settings menu (usually accessed by pressing a Settings or Menu button on the remote) and look for a section called Audio, Sound, or Speaker Settings.

Inside that section, find an option for "Audio Output," "Sound Output," or "Speaker." Your TV is probably set to "TV Speaker" or "Internal Speaker." Change this to match your connection method: "Optical" for optical cable, "Bluetooth" for Bluetooth, or "Audio Out" or "External Speaker" for analog cables. Save the change and exit the menu. Your soundbar should now play all the sound from your TV.

If you do not see these options in your TV's main settings, try looking in an Advanced Settings or External Device section. Different TV brands organize these menus differently, so you may need to explore a bit. Your TV's manual or the manufacturer's website can tell you the exact path for your model.

Troubleshooting when sound does not come through

If you have connected the cable or paired the devices but hear no sound, start by checking the volume. Make sure your soundbar's volume is turned up (not muted) and that your TV's volume is also turned up. Many people forget this step and assume the connection failed.

Next, verify that your TV's audio output is actually set to the external device. Go back to your TV's audio settings and confirm that you selected the right output option. If you selected "Optical" but your soundbar is connected via Bluetooth, for example, the TV will send sound to the optical port (which is empty) instead of to the soundbar.

If the connection is still not working, try unplugging both the TV and soundbar, waiting 30 seconds, and plugging them back in. This resets both devices and often fixes connection problems. For Bluetooth, you may also need to "forget" the soundbar from your TV's Bluetooth settings and pair it again from scratch.

If you are still having trouble, check your soundbar's manual to see if it has a specific input mode you need to select. Some soundbars have a button or menu option that lets you choose which input to listen to (Optical, Bluetooth, or Analog), and if it is set to the wrong one, you will not hear sound even though the connection is working.

When to call a professional or contact the manufacturer

Most soundbar connections are straightforward enough to handle yourself, but there are situations where professional help makes sense. If your TV does not have any audio output ports at all (some very new smart TVs only have HDMI), you will need either a Bluetooth adapter or an HDMI audio extractor, and the setup can get complicated. A TV repair technician or electronics store can advise you on which adapter will work with your specific TV model.

If you have tried all three connection methods and none of them work, contact your soundbar's manufacturer — there may be a firmware update available, or the soundbar may have a hardware problem. Most manufacturers offer phone or email support and can walk you through advanced troubleshooting steps.

Frequently Asked Questions

Can I use both optical and Bluetooth at the same time?

No. Your soundbar will listen to only one input at a time. If you connect both optical and Bluetooth, you will need to manually switch which input the soundbar is using, usually with a button on the soundbar or its remote. Most people pick one method and stick with it.

Why does my Bluetooth connection keep dropping?

Bluetooth can be interrupted by other wireless devices, distance, or obstacles between the TV and soundbar. Move the soundbar closer to the TV, turn off other Bluetooth devices nearby, and make sure nothing is blocking the line between them. If the problem persists, switch to optical cable instead.

Do I need a special cable for optical, or will any optical cable work?

Any optical cable will work as long as both ends fit your TV and soundbar ports. They are all the same inside. Buy the cheapest one you can find — there is no quality difference between a $5 cable and a $15 one.

What if my TV has no audio output ports at all?

Some newer TVs only have HDMI ports. In this case, you can buy an HDMI audio extractor (a small device that pulls audio out of an HDMI signal) and connect it between your TV and soundbar using optical or analog cables. These cost $20 to $40 and are sold online and at electronics stores.

Will the sound quality be worse without HDMI?

Optical cable carries the same high-quality digital audio as HDMI, so there is no difference in sound quality. Analog cables and Bluetooth are slightly lower quality, but most people cannot hear the difference in everyday use. If sound quality is your main concern, use optical cable.