Connect the optical cable to both devices
An optical cable (also called a Toslink or SPDIF cable) carries digital sound from your Vizio TV to your soundbar. The connection takes about two minutes and requires no settings changes on most soundbars.
Locate the optical output port on the back of your Vizio TV. It is a small square port, usually labeled "Optical Out" or "Toslink Out," and often sits near other audio and video ports. The port has a small plastic cover you can slide or pop off.
Take one end of your optical cable and insert it into the TV's optical output port. Push it straight in until you hear or feel a click—the connector should sit flush with the port. Then take the other end and insert it into the optical input port on your soundbar. This port is usually on the back panel, sometimes labeled "Optical In" or "Toslink In." Again, push until it clicks.
Do not force the cable. If it does not slide in smoothly, check that you are using the correct port and that the plastic covers are fully removed.
Key Takeaways
- Optical cables carry digital sound from your TV to the soundbar and require no power or pairing—they work when ready after connection.
- The optical output port on your Vizio TV is a small square port on the back panel, usually near other audio ports and labeled "Optical Out."
- Push the optical cable connector into both the TV and soundbar ports until you hear a click, ensuring the connection is find.
- If sound does not play through the soundbar after connecting, check your TV's audio output settings to confirm the optical port is selected as the audio source.
Set your TV to send sound through the optical port
After the cable is connected, your Vizio TV needs to be told to send sound out through the optical port instead of its built-in speakers. This step is necessary on most Vizio models.
On your Vizio remote, press the Menu button. Navigate to Audio or Sound (the exact name varies by TV model). Look for an option called Audio Output, Speaker Output, or Digital Audio Out.
Select that option and choose Optical or S/PDIF from the list. Some Vizio TVs also show Soundbar as a direct option—if yours does, select that instead. Save your changes and exit the menu.
If you cannot find this setting, check your TV's manual or model number on Vizio's website. The menu structure changes between TV generations, but the optical output setting is always in the audio section.
Turn on your soundbar and test the connection
Power on your soundbar using its power button or remote. Most soundbars automatically detect an optical signal and switch to that input without you having to press anything.
Turn up the volume on your soundbar to a comfortable level. Then play something on your TV—a streaming app, a broadcast channel, or a movie. You should hear sound coming from the soundbar, not from the TV's speakers.
If you hear sound from both the TV and the soundbar, go back to the audio settings and make sure the TV's speakers are turned off. Look for an option called TV Speaker, Internal Speaker, or Speaker Output and set it to Off.
If you hear no sound at all, check that the optical cable is fully inserted into both ports (you should see no gap between the connector and the port). Then verify that your TV's audio output is set to Optical in the menu.
Adjust volume and audio settings
Once sound is playing through the soundbar, you can control the volume using either the soundbar's remote or your Vizio TV remote. Most soundbars respond to TV remotes automatically when connected via optical cable.
If your soundbar has a volume knob on the front or side, you can also adjust it there. Set the soundbar to a middle volume level (around 50 percent) and use your TV remote to fine-tune from there. This gives you the most control and prevents accidental loud bursts.
Some Vizio TVs have a Volume Leveling or Auto Volume setting in the audio menu. This feature keeps the volume consistent when you switch between channels or apps. You can turn it on or off depending on your preference.
Troubleshoot if sound is not working
If you have connected the cable and set the audio output to Optical but still hear no sound, start by checking the cable itself. Unplug it from both the TV and soundbar, wait five seconds, and plug it back in firmly. Sometimes a loose connection is the only problem.
Next, restart both devices. Unplug your soundbar from power for 30 seconds, then plug it back in. Do the same with your TV if possible. This clears any temporary settings that might be blocking the signal.
If the soundbar has a display or indicator light, look for a light that shows it is receiving an optical signal. Some soundbars show "Optical" or "Toslink" on a small screen when the connection is active. If you see no indicator, the cable may not be fully seated or the TV's audio output setting may not be correct.
As a last step, check whether your soundbar has a manual input selector. Some models require you to press a button on the soundbar or remote to switch to the Optical input. Consult your soundbar's manual if you are unsure—the input button is often labeled "Input," "Source," or "Select."
When to use optical instead of other connection types
Optical cables work well for most TV and soundbar combinations because they carry high-quality digital sound and do not require pairing or setup. They are also more reliable than wireless connections in homes with many Wi-Fi devices.
However, optical cables have one limitation: they do not carry the newest surround sound formats like Dolby Atmos. If your soundbar supports Atmos and your TV can output it, you may want to use HDMI instead. But for standard surround sound and stereo audio, optical is straightforward and effective.
Optical cables also do not carry video, so you still need HDMI cables connected to your TV for picture. The optical cable only handles sound.
Frequently Asked Questions
Do I need to pair my soundbar to my TV when using an optical cable?
No. Optical cables are wired connections, so there is no pairing step. Once the cable is plugged in and your TV's audio output is set to Optical, the soundbar should receive sound when ready. No Bluetooth or Wi-Fi setup is needed.
Can I use the same optical cable for other devices?
Yes. Optical cables are universal—the same cable works with any TV, soundbar, receiver, or audio device that has an optical port. If you need to move the cable to a different device, straightforward unplug it and plug it into the new device's optical port.
What if my Vizio TV does not have an optical output port?
Some older or budget Vizio models do not include an optical port. If yours does not, you can use HDMI with ARC (Audio Return Channel) instead, or connect the soundbar directly to your cable box or streaming device using its optical port. Check your TV's manual to confirm which ports are available.
Will the optical cable work if my soundbar is wireless?
Yes. Many soundbars have both wireless and wired inputs. The optical cable is a wired connection, so it works independently of whether the soundbar also supports Bluetooth or Wi-Fi. You can use optical even if the soundbar is a wireless model.
How far away can the soundbar be from the TV?
Optical cables work reliably up to about 30 feet, though most people place the soundbar within 10 feet of the TV. If you need a longer cable, optical cables longer than 30 feet may lose signal quality. Standard optical cables come in lengths of 3, 6, and 10 feet.