Connect Your TCL Soundbar Using HDMI or Optical Cable
The fastest way to connect a TCL soundbar to your TV is with a cable — either HDMI or optical digital audio. Both methods send sound from your TV directly to the soundbar without needing to adjust settings on your TV. Most TCL soundbars come with at least one of these cables in the box.
Check the back of your soundbar and the back of your TV first. If your TV has an HDMI port labeled ARC or eARC, use that one — it lets the soundbar control your TV's volume with a single remote. If your TV does not have ARC, or if you prefer optical, look for a port labeled "Optical Out" or "Digital Audio Out" on your TV. Plug the cable into that port on the TV and into the matching port on the soundbar, then power on both devices.
The soundbar should detect the connection automatically. If you do not hear sound from the soundbar after a few seconds, check that your TV's audio output is not set to the TV speakers. Go into your TV's settings menu, find the audio or sound section, and switch the output to HDMI ARC or Optical (whichever cable you used).
Key Takeaways
- HDMI ARC is the easiest connection method because it lets one remote control both your TV and soundbar volume.
- Optical digital audio works on older TVs that do not have HDMI ARC and produces the same sound quality as HDMI.
- After plugging in the cable, you must switch your TV's audio output setting from TV speakers to the soundbar input.
- Bluetooth connection works for phones and tablets but not for TV audio on most TCL soundbars, so use a cable for your television.
Connect via Bluetooth for Phones and Tablets
If you want to play music or podcasts from your phone or tablet through the TCL soundbar, use Bluetooth. Press and hold the Bluetooth button on the soundbar remote or on the soundbar itself (usually marked with a Bluetooth symbol) for three to five seconds until you see a blue light blinking on the soundbar.
On your phone or tablet, open the Bluetooth settings and look for your soundbar model number in the list of available devices. Tap it to pair. The first time you connect, this pairing process takes about 10 to 15 seconds. After that, your phone will reconnect automatically whenever you turn on the soundbar and enable Bluetooth on your device.
Bluetooth works well for streaming audio from apps like Spotify or YouTube, but it does not work for TV audio on most TCL soundbars. Your TV does not send Bluetooth signals to external speakers — it only sends audio through HDMI or optical cables. If you want to hear your TV through the soundbar, you must use a cable connection.
Troubleshoot When You Do Not Hear Sound
If you plugged in the cable but hear nothing from the soundbar, start by checking the volume. Press the volume up button on the soundbar remote several times. The soundbar may be muted or set to very low volume.
Next, check your TV's audio output setting. On most TCL TVs, press the Menu button on the remote, navigate to Sound or Audio, and look for an option called "Audio Output" or "Speaker Output." Change it from "TV Speaker" to "HDMI ARC" or "Optical" depending on which cable you used. Save the setting and test the sound again.
If you still hear nothing, unplug both the TV and soundbar for 30 seconds, then plug them back in. This resets the connection. Wait for both devices to fully power on (usually one to two minutes), then test again. If the soundbar has a power button separate from the remote, press it to make sure the soundbar is actually on — some models have a small LED light that shows power status.
Understand HDMI ARC Versus Optical Audio
HDMI ARC (Audio Return Channel) is the newer standard and works best if your TV supports it. With ARC, you use one HDMI cable, and the soundbar can receive both video and audio signals. You can also control the soundbar volume using your TV remote, which is convenient. Most TCL TVs made in the last five years have at least one ARC-capable HDMI port, usually labeled HDMI 3 or HDMI 4.
Optical digital audio is older but works on almost every TV made in the last 15 years. It uses a thin fiber-optic cable and sends only audio, not video. Optical does not let you control soundbar volume from your TV remote — you must use the soundbar remote. The sound quality is identical to HDMI ARC, so if your TV does not have ARC, optical is a perfectly good choice.
If your TV has both HDMI ARC and optical ports, choose HDMI ARC for simplicity. If your TV only has optical, use that. Do not use both cables at the same time — pick one and stick with it.
Set Up the Soundbar Remote to Control Your TV
Many TCL soundbars come with a remote that can control your TV's power and volume if you set it up. This feature only works when you use HDMI ARC, not with optical audio.
To enable this, point the soundbar remote at your TV and press and hold the TV Power button for five to ten seconds. The remote will send a signal to your TV asking permission to control it. Your TV may show a message asking if you want to allow the soundbar remote to control it — select Yes or Allow. After this, you can use the soundbar remote to turn your TV on and off and to adjust volume.
If the remote does not control your TV after trying this, check that your TV and soundbar are connected with an HDMI ARC cable. Optical audio does not support remote control between devices. You can also check your TV's manual to see if it has a setting to allow external remotes — some models require you to turn this on in the settings menu first.
Connect Multiple Devices to Your Soundbar
Your TCL soundbar can stay connected to your TV with a cable and also connect to your phone via Bluetooth at the same time. When you want to watch TV, the soundbar plays audio from the TV. When you want to play music from your phone, switch to Bluetooth mode on the soundbar (usually by pressing a Bluetooth button on the remote), and the soundbar will play from your phone instead.
Some TCL soundbars also have a USB port or an auxiliary audio input (a 3.5mm jack) on the back. These let you connect other devices like a laptop, tablet, or older music player. Check the back of your soundbar to see which ports are available. If you use USB, you may need to plug in a USB cable and select USB as the input on the soundbar remote.
You can pair up to five or six phones or tablets to your soundbar via Bluetooth, but only one device can play audio at a time. If you want to switch from one phone to another, just start playing audio on the second phone and the soundbar will switch automatically.
Frequently Asked Questions
Do I need a special HDMI cable for HDMI ARC?
No. Any standard HDMI cable works with ARC. The cable itself is not different — the ARC feature is built into the HDMI ports on your TV and soundbar. If your TV and soundbar both have HDMI ARC ports, any HDMI cable will work.
Can I use a soundbar with a TV that does not have HDMI ARC or optical audio?
Very old TVs without these ports are rare, but if yours does not have either, you can use a Bluetooth connection if your soundbar supports it. However, Bluetooth audio from a TV is uncommon — most TVs do not send Bluetooth signals. Check your TV manual to see if Bluetooth audio output is available.
Why does my soundbar keep disconnecting from my TV?
Check that the cable is fully inserted into both the TV and soundbar ports. A loose connection can cause the soundbar to drop the signal. If the cable is find, try a different HDMI or optical cable to rule out a damaged cable. Also make sure your TV's audio output setting has not switched back to TV Speaker — this sometimes happens after a TV software update.
Can I use the soundbar remote to control my TV if I use an optical cable?
No. Remote control between devices only works with HDMI ARC. Optical audio is one-way only — it sends sound from the TV to the soundbar but does not allow the soundbar remote to send commands back to the TV. If you want remote control, switch to HDMI ARC.
What should I do if the soundbar remote does not work with my TV?
First, confirm you are using HDMI ARC and that the cable is plugged into the ARC port on both devices. Then try the pairing process again by holding the TV Power button on the soundbar remote for five to ten seconds. If it still does not work, check your TV manual to see if there is a setting to allow external remotes, or contact TCL support with your soundbar model number.