The fastest way: HDMI with eARC

Most Samsung soundbars connect to your TV using a single HDMI cable plugged into the eARC port on your TV. eARC (enhanced Audio Return Channel) lets the TV send sound back through the same cable, so you do not need a separate audio cable. This is the simplest setup and works with almost every Samsung soundbar made in the last five years.

First, locate the eARC port on your TV. On Samsung TVs, it is usually HDMI 3 or HDMI 4, and the manual or the TV's settings menu will confirm which one. Plug one end of an HDMI cable into that port and the other end into the HDMI IN port on the back of your soundbar. Power on both devices. The soundbar should light up and show it is connected within a few seconds.

If the soundbar does not produce sound right away, go into your TV's settings, find the sound or audio menu, and make sure eARC is turned on. On Samsung TVs this is usually under Settings > Sound > Sound Output or Settings > Sound > informed Settings. Once eARC is enabled, audio from your TV apps, cable box, or streaming devices will play through the soundbar automatically.

Key Takeaways

  • HDMI eARC is the standard connection method and requires only one cable from your TV's eARC port to the soundbar's HDMI IN port.
  • Your TV's eARC setting must be turned on in the sound settings menu, or the soundbar will not receive audio.
  • Optical audio is an alternative if your TV lacks eARC or if the HDMI connection does not work.
  • Bluetooth pairing works for phone and tablet audio but does not carry TV sound unless you use a separate Bluetooth transmitter.
  • If sound does not play after connecting, restart both devices and check that the soundbar is set as the default audio output in your TV settings.

Using optical audio if your TV has no eARC

Older TVs or some budget models do not have eARC. If your TV only has a standard HDMI port or an optical audio port, use the optical connection instead. Optical audio sends sound through a thin fiber-optic cable and works reliably, though it does not support advanced audio formats like Dolby Atmos.

Locate the optical audio port on your TV — it is a small square opening, usually labeled "Optical Out" or "SPDIF Out." Plug one end of an optical audio cable into that port and the other end into the Optical In port on the back of your soundbar. Power on both devices. Then go into your TV's sound settings and set the audio output to Optical. The soundbar should begin playing TV audio within a few seconds.

Optical audio works with all Samsung soundbars, even older models. The main drawback is that you may need to adjust the soundbar volume separately from the TV remote, depending on your soundbar model. Check your soundbar's manual to see if it supports volume control through the optical connection.

Connecting via Bluetooth for phone and tablet audio

If you want to play music or podcasts from your phone or tablet through the soundbar, use Bluetooth. This does not carry TV audio — only audio from devices you pair directly to the soundbar. Press and hold the Bluetooth button on your soundbar (or use the Samsung SmartThings app) until the light blinks blue, which means it is in pairing mode. On your phone or tablet, go to Bluetooth settings, find your soundbar's name in the list, and tap it to pair.

Once paired, audio from your phone will play through the soundbar whenever it is in range. You can pair multiple phones to the same soundbar, though only one can play audio at a time. To switch between devices, pause audio on the first device and start playing on the second.

Bluetooth is convenient for casual listening but has a slight delay (usually under half a second), so it is not ideal for watching videos on your phone. For TV sound, stick with HDMI eARC or optical audio.

Troubleshooting when sound does not play

If you have connected the soundbar but hear no sound from your TV, start by restarting both devices. Unplug the soundbar and TV for 30 seconds, then plug them back in and wait for them to fully boot. This clears temporary connection errors that often prevent audio from flowing.

Next, check your TV's sound output setting. Go to Settings > Sound and look for an option called "Sound Output," "Speaker," or "Audio Output." Make sure it is set to the port you are using (HDMI eARC, Optical, or External Speaker) rather than the TV's built-in speakers. If the soundbar is listed as an option, select it directly.

If you are using HDMI eARC, verify that eARC is enabled in your TV settings. Some TVs have it turned off by default. Also check that you are using the correct HDMI port — eARC only works on one specific port per TV, usually HDMI 3 or 4. Plugging the cable into the wrong port will not produce sound.

If the soundbar is connected but still silent, try adjusting the soundbar's volume. Some soundbars ship with the volume set very low or muted. Use the soundbar's remote or the SmartThings app to turn the volume up to at least 20 percent. If you still hear nothing, unplug the soundbar for 10 seconds and plug it back in to perform a hard reset.

Controlling the soundbar with your TV remote

When connected via HDMI eARC, most Samsung soundbars respond to your TV remote's volume buttons automatically. Press the volume up or down button on your TV remote, and the soundbar volume should change. If this does not work, your TV may need to be set to control external speakers. Check your TV's settings under Sound or Remote to enable this feature.

If your soundbar is connected via optical audio, the TV remote usually does not control the soundbar volume. You will need to use the soundbar's own remote or the SmartThings app to adjust volume. Some soundbars have a setting to enable TV remote control over optical, so check your soundbar's manual.

Connecting multiple devices to the same soundbar

Your soundbar can receive audio from your TV through HDMI or optical, and also from your phone through Bluetooth, at the same time. The soundbar will play whichever source is actively sending audio. If your TV is on and playing sound, the TV audio takes priority. When you pause the TV and start playing music from your phone, the soundbar switches to Bluetooth automatically.

You can also connect a cable box, gaming console, or streaming device directly to the soundbar's HDMI ports (if it has them) instead of running audio through the TV. This is useful if you want the soundbar to play audio from multiple sources without turning on the TV. Check your soundbar's manual to see how many HDMI inputs it has and whether it supports this setup.

Frequently Asked Questions

Do I need a special HDMI cable for eARC?

No. Any standard HDMI cable works with eARC. You do not need to buy an expensive "eARC cable" — the feature is built into the port itself, not the cable. A cable you already own will work fine.

Can I use both HDMI and optical at the same time?

Yes, but the soundbar will only play audio from one source at a time. If both are connected, the soundbar usually prioritizes HDMI. You can switch between them manually using the soundbar's input button or the SmartThings app.

Why does my soundbar keep disconnecting from Bluetooth?

Bluetooth range is typically 30 feet, so move your phone closer to the soundbar. If the problem continues, restart both devices and re-pair them. Also check that no other devices are trying to connect to the soundbar at the same time, as this can cause interference.

Will my soundbar work if my TV does not have eARC?

Yes. Use an optical audio cable instead, or connect your devices directly to the soundbar's HDMI ports if it has them. eARC is convenient but not required — optical audio works just as well for standard TV sound.

How do I know if my TV has eARC?

Check your TV's manual or look at the HDMI ports on the back. eARC ports are usually labeled "eARC" or "ARC/eARC." If you are unsure, go to your TV's settings and search for "eARC" — if the option exists, your TV has it.