Connect the Aux Cable Between Your Soundbar and TV

An aux cable (also called a 3.5mm audio cable or headphone cable) runs a single audio line from your TV's headphone jack or audio output to your Vizio soundbar's aux input. This is the most straightforward wired connection if your TV has an audio output jack and your soundbar has an aux port.

Locate the audio output on your TV first. Most TVs have either a 3.5mm headphone jack (looks like a small round hole) or red and white RCA jacks (the colored ports at the back or side). Your Vizio soundbar will have a 3.5mm aux input port, usually labeled "Aux In" or "Line In" on the back panel. Plug one end of the aux cable into your TV's audio output and the other end into the soundbar's aux input port.

Once connected, turn on both devices. Use your TV's remote to set the audio output to the headphone jack or audio output port (not the TV speakers). On your Vizio soundbar, press the input button on the remote or the soundbar itself until the display shows "Aux" or "Line In" as the active input. You should hear sound coming from the soundbar instead of the TV speakers.

Key Takeaways

  • An aux cable connects your TV's audio output jack to your Vizio soundbar's aux input port with a straightforward plug-and-play setup.
  • Your TV must have an audio output jack (either 3.5mm or RCA) — many newer TVs only have HDMI and no separate audio output.
  • After plugging in the cable, switch your TV's audio output to the headphone jack or audio port in the TV's sound settings.
  • Switch your Vizio soundbar's input to "Aux" or "Line In" using the remote or the button on the soundbar itself.
  • If your TV has no audio output jack, you will need to use HDMI, optical, or Bluetooth instead of an aux cable.

Check Your TV's Audio Output Options

Not all TVs have an audio output jack. Older and mid-range TVs often have a 3.5mm headphone jack on the back or side. Some TVs use red and white RCA jacks instead. Newer flat-screen TVs, especially budget models, may have removed the audio output entirely and only include HDMI ports.

Look at the back and sides of your TV for a small round jack labeled "Headphone" or "Audio Out," or for a pair of colored RCA ports. If you find either one, an aux cable will work. If your TV has only HDMI ports and no separate audio output, you cannot use an aux cable — you will need to use HDMI with audio return channel (ARC), optical audio, or Bluetooth instead.

Check your TV's manual or the manufacturer's website if you are unsure. Search for your TV model number (usually found on a sticker on the back) and look for the specifications or connection diagram. This takes two minutes and saves you from buying a cable that will not work.

Set Your TV's Audio Output to the Headphone Jack

After plugging in the aux cable, your TV will not automatically send sound to the soundbar. You must tell the TV to output audio through the headphone jack instead of through its own speakers.

Open your TV's settings menu using the remote. Look for a section called "Sound," "Audio," or "Speaker Settings." Find the option for "Audio Output" or "Speaker Output." Select "Headphone Jack," "Audio Out," "External Speaker," or "Line Out" — the exact name depends on your TV brand. Do not select "TV Speaker" or "Internal Speaker."

Some TVs also have a volume control for the audio output. Make sure it is not set to mute or zero. If you still hear no sound from the soundbar after this step, go back into the audio settings and confirm the headphone jack is selected.

Switch Your Vizio Soundbar to Aux Input

Your Vizio soundbar may start on a different input by default, such as HDMI or Bluetooth. You need to switch it to the aux input to hear sound from the TV.

Look for an input button on the Vizio soundbar itself (usually on the right side or top) or use the Vizio remote that came with the soundbar. Press the input button repeatedly until the display on the soundbar shows "Aux," "Line In," or "3.5mm." The display may be a small LED screen or just a light that changes color for each input.

If you cannot find the input button on the soundbar, check the remote. Most Vizio remotes have an "Input" or "Source" button. Press it and select "Aux" from the menu that appears on your TV screen or the soundbar's display. Once the soundbar is set to aux input, it will stay on that input until you manually change it again.

Adjust Volume and Test the Connection

Turn the volume up on both your TV and your Vizio soundbar. Start with the TV volume at a medium level (around 50 percent) and the soundbar volume at a low level. Gradually increase the soundbar volume until you reach a comfortable listening level.

Play something on your TV — a streaming app, a broadcast channel, or a disc — and confirm you hear sound from the soundbar and not from the TV speakers. If the TV speakers are still playing, go back to the TV's audio settings and double-check that the headphone jack is selected as the audio output.

If you hear nothing from either the TV or the soundbar, check that the aux cable is fully inserted into both ports. A loose connection is the most common reason for no sound. Unplug the cable, inspect both ends for damage, and plug it back in firmly.

Troubleshoot Common Aux Connection Problems

No sound from the soundbar: First, confirm the aux cable is plugged in all the way on both ends. Then check that your TV's audio output is set to the headphone jack (not TV speakers) and that your Vizio soundbar is set to aux input. If the soundbar display does not show "Aux," press the input button again.

Sound only from the TV speakers: Your TV's audio output is still set to the TV speakers. Go back into the TV's sound settings and select the headphone jack or audio output option. Some TVs require you to disable the TV speakers before audio will route to an external device.

Quiet or distorted sound: The volume on your TV or soundbar may be too low or too high. Lower the TV volume to 50 percent and raise the soundbar volume gradually. If the sound is crackling or cutting in and out, the aux cable may be damaged or not fully inserted. Try a different aux cable if you have one available.

Soundbar will not turn on: Make sure the soundbar is plugged into power and the power button is pressed. An aux cable only carries audio — it does not power the soundbar. If the soundbar still will not turn on, the power adapter may be faulty and you may need to contact Vizio support.

When to Use Aux Instead of Other Connection Methods

An aux cable is a good choice if your TV has an audio output jack and you want a straightforward, reliable connection with no setup required. It works with any Vizio soundbar that has an aux input port. There is no pairing, no apps, and no wireless interference.

However, aux has limitations. The cable must run between your TV and soundbar, which can be messy if they are far apart. You cannot use aux if your TV has no audio output jack. And if you want to use your soundbar with other devices (like a phone or tablet), you would need to unplug the TV cable and plug in a new one each time.

If your TV has no audio output jack, consider HDMI with audio return channel (ARC) if your TV and soundbar both support it — this uses a single HDMI cable and is cleaner than aux. If your soundbar supports Bluetooth, you can also connect wirelessly without any cable. Optical audio is another option if your TV has an optical port. Each method has trade-offs, but aux is the most straightforward if your equipment supports it.

Frequently Asked Questions

Can I use any aux cable, or do I need a special one for a soundbar?

Any standard 3.5mm aux cable works with a Vizio soundbar. They are all the same — the cable itself does not matter. Buy the length you need (usually 6 to 10 feet) from any electronics store or online retailer. Avoid extremely cheap cables, as they may have loose connections, but you do not need an expensive "audiophile" cable.

What if my TV has RCA jacks instead of a 3.5mm headphone jack?

You can use an RCA-to-3.5mm adapter cable, which has red and white RCA connectors on one end and a 3.5mm plug on the other. Plug the RCA end into your TV and the 3.5mm end into the soundbar's aux input. These adapters cost a few dollars and work just as well as a direct aux cable.

Will the aux connection work if my TV is in a different room from the soundbar?

An aux cable can only run as far as the physical cable length allows. If your TV and soundbar are in different rooms, you would need a very long cable (50+ feet), which is impractical and can cause sound quality issues. In this case, Bluetooth or a wireless connection method would be better if your soundbar supports it.

Do I need to adjust any settings on my Vizio soundbar after connecting the aux cable?

No special settings are needed. Just switch the soundbar to aux input and adjust the volume. Some Vizio soundbars have a "Night Mode" or other audio settings you can explore in the remote menu, but these are optional and not required for the aux connection to work.

Can I connect my soundbar to my TV with aux and also use Bluetooth for other devices?

No. Your Vizio soundbar can only play audio from one input at a time. If the soundbar is set to aux input, it will not respond to Bluetooth connections. To switch between aux and Bluetooth, you must press the input button on the soundbar or remote and select the input you want to use.