The fastest way to hide soundbar wires
The simplest method is to run wires behind the TV stand or entertainment console where they are already out of sight. Most soundbars sit directly below or in front of a television, and the cables connecting them—power cord, HDMI, optical, or aux—can stay hidden in the gap between the TV and the furniture it sits on. If your stand has a back panel or enclosed shelving, wires disappear completely. If it is open, you can use cable clips or adhesive cable sleeves to bundle wires against the back of the stand where they blend into the shadow.
When the soundbar sits on a wall-mounted TV, the challenge is different: wires run down the wall in plain view. The most common solution is to use a cable raceway—a plastic or metal channel that mounts flat against the wall and hides wires inside. Paint it to match your wall color, and it becomes nearly invisible. Alternatively, run wires inside the wall itself if you are willing to cut into drywall, but this requires basic carpentry and is permanent.
Key Takeaways
- Cable raceways are the easiest wall solution: they mount flat against drywall, hide wires inside, and can be painted to match your wall color.
- Adhesive cable sleeves and clips cost under $15 and work well for hiding wires behind furniture or along the back of a TV stand.
- Running wires inside the wall requires cutting drywall and fishing cables through the cavity, but produces the cleanest look if you are comfortable with basic carpentry.
- Wireless soundbars eliminate the need to hide audio cables, though they still require a power cord unless you use a battery-powered model.
Cable raceways for wall-mounted TVs
A cable raceway is a hollow channel, usually made of PVC plastic or aluminum, that mounts flat to your wall and holds wires inside. You buy it in lengths of 5 to 10 feet at hardware stores or online, cut it to the distance between your TV and soundbar (or between the TV and the outlet), and attach it with adhesive strips or small screws. The wires feed into one end, and the raceway closes with a snap-on cover.
To install one, measure the distance from your TV down to the soundbar or outlet—this is the length you need. Clean the wall with a dry cloth to remove dust, then peel the adhesive backing and press the raceway firmly in place. Feed your power cord and audio cables through the channel, snap the cover closed, and paint it with acrylic paint if you want it to match your wall. Most raceways are white or black, so painting is optional if your wall is already one of those colors.
The main limitation is that a raceway can hold only a certain number of cables—usually three to five depending on thickness. If you have many wires, you may need two raceways side by side, or you may need to choose which cables to hide and leave others behind furniture.
In-wall wire routing for a seamless finish
Running wires inside the wall produces the cleanest look because nothing is visible on the surface. This method requires cutting into drywall, fishing cables through the wall cavity, and installing wall plates at the TV and soundbar locations. It is permanent and more involved than a raceway, but the result is completely hidden.
Start by turning off power to any outlets in the wall. Use a stud finder to locate the wooden framing behind the drywall so you can avoid drilling into it. Mark where you want to cut—typically a small rectangular hole behind the TV and another behind the soundbar. Use a drywall saw (a small keyhole saw) to cut these holes carefully. Feed a fish tape (a flexible metal rod) through the wall cavity from one hole to the other, attach your cables to the end, and pull them through. Install low-voltage wall plates at each hole to cover the opening and hold the cables in place.
This method works best if your TV and soundbar are on the same wall and relatively close together. If they are far apart or on different walls, you may need to run cables through multiple cavities, which becomes complicated. Hire an electrician or handyperson if you are not comfortable cutting drywall or working inside walls.
Adhesive cable sleeves and clips for furniture-based setups
If your soundbar sits on a TV stand or console rather than a wall, adhesive cable sleeves and clips are the easiest solution. These are plastic tubes or clips that stick to the back of furniture and bundle wires together so they are less visible. They cost between $5 and $15 and require no tools or installation beyond peeling and sticking.
Measure the length of wire you need to cover, then buy a sleeve or clip set that matches. Clean the back of your TV stand with a dry cloth, peel the adhesive backing, and press the sleeve or clip firmly in place. Feed your cables through it, and they will stay bundled and hidden against the furniture. If you need to add more cables later, most sleeves have openings you can feed new wires through without removing the sleeve.
The downside is that sleeves and clips only work if the back of your furniture is not visible—if your stand is in the middle of a room or has an open back, wires will still show. In that case, a cable raceway on the wall or running wires inside the wall is a better choice.
Wireless and battery-powered soundbars
If hiding wires feels like too much work, a wireless soundbar eliminates the audio cable problem entirely. These models connect to your TV via Bluetooth or WiFi instead of a physical cable, so you only have a power cord to hide. Battery-powered soundbars go one step further and need no power cord at all, though they require charging every few days to a few weeks depending on the model.
Wireless soundbars are more expensive than wired models, and Bluetooth can occasionally drop the connection if your TV and soundbar are far apart or if other devices interfere. WiFi models are more reliable but require your soundbar to be within range of your home network. If you already have a wired soundbar and do not want to replace it, hiding the audio cable with a raceway or sleeve is usually cheaper than buying a new wireless model.
Hiding the power cord
Even if you hide the audio cables, the power cord still needs to reach an outlet. The same methods work: run it behind furniture, use a cable sleeve, or hide it in a wall raceway. If the nearest outlet is far from your soundbar, a power extension cord or power strip can help you position the outlet closer. Use a heavy-duty extension cord rated for the soundbar's power draw (usually 30 to 50 watts), and avoid coiling excess cord—lay it flat or use cable clips to find it.
If you are running the power cord along a wall, a cable raceway works well and looks neater than a bare cord. Paint it to match your wall, and it becomes part of the background. Never hide a power cord inside a wall cavity—it can overheat and create a fire hazard. Power cords must stay outside the wall and be accessible.
Common mistakes to avoid
The most common mistake is buying a cable raceway that is too small. Measure your cables' combined thickness before you buy—a raceway rated for three cables may not fit four. If you are unsure, buy the next size up; an oversized raceway is easier to work with than one that is too tight.
Another mistake is using the wrong adhesive. Cheap adhesive strips may not hold in a warm room or if the wall is textured. Use 3M Command strips or similar heavy-duty adhesive designed for the weight of your cables. Test the adhesive on a small area first if your wall is textured or painted with a glossy finish.
If you are running wires inside the wall, do not assume the wall cavity is empty. Electrical wiring, plumbing, and HVAC ducts may be hidden inside. Use a stud finder with a wire detector, or hire a professional to scan the wall before you cut. Hitting a live electrical wire can be dangerous.
Frequently Asked Questions
Can I run soundbar cables inside the same wall as electrical wiring?
No. Electrical codes in most areas require low-voltage cables (audio, video, data) to be separated from high-voltage electrical wiring by at least 12 inches or run in a separate conduit. If you are unsure whether your wall setup allows it, hire an electrician to check before you cut.
What if my soundbar is too far from the TV to hide wires easily?
If the soundbar is on a different wall or far away, a wireless model is usually the best choice. If you want to keep a wired soundbar, run a long cable raceway along the wall or baseboard, or run cables inside the wall if the distance is not too great. Measure first to see if a single raceway will work.
Do cable raceways work on textured or brick walls?
Adhesive raceways work poorly on textured drywall because the adhesive does not grip evenly. On brick or concrete, adhesive does not work at all—use a raceway with mounting brackets and small screws instead. Screw-mounted raceways are stronger and more reliable on any surface.
Can I paint a cable raceway after I install it?
Yes. Let the adhesive cure for 24 hours, then use acrylic paint and a small brush or foam roller to paint the raceway. Use the same paint color as your wall so it blends in. Avoid thick paint that might clog the cable openings.
What gauge extension cord do I need for a soundbar?
Most soundbars draw 30 to 50 watts, so a standard 16-gauge extension cord rated for 13 amps is sufficient. Check your soundbar's power rating on the back or in the manual. If it draws more than 50 watts, use a 14-gauge cord instead. Never use a cord thinner than 16 gauge for a soundbar.