The fastest way: HDMI with ARC or eARC
Most soundbars connect to your TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This is the simplest method because one cable carries both picture and sound, and your TV remote often controls the soundbar's volume automatically.
Check the back of your TV for a port marked HDMI ARC or HDMI eARC — usually it's HDMI 3 or HDMI 4, but the label varies by brand. Plug one end of an HDMI cable into that port and the other end into the HDMI input on your soundbar. Turn on both devices. Your TV should detect the soundbar within seconds, and you may see a notification on screen.
If your TV is older and has no ARC port, or if ARC is not working, move to the optical cable method below. Do not buy a new TV — optical works just as well, it just requires a separate step.
The optical cable method: for older TVs or when HDMI ARC fails
An optical cable (also called a Toslink cable) carries sound from your TV to the soundbar through a thin fiber-optic line. It does not carry picture, only audio, so you still need HDMI for video — but many people prefer optical because it is more stable on older equipment.
Locate the optical audio output port on the back of your TV. It is a small square port, often labeled "Optical Out" or "SPDIF." Plug one end of the optical cable into that port and the other end into the optical input on your soundbar. Turn on both devices. The soundbar should recognize the connection automatically.
Optical cables cost $5 to $15 and are sold at any electronics store. They are also more durable than HDMI cables for this purpose because the connection is less prone to loosening over time.
Key Takeaways
- HDMI ARC or eARC is the fastest method: one cable from your TV's ARC port to your soundbar's HDMI input, and your TV remote controls volume.
- An optical cable works on any TV with an optical audio port and is often more stable than HDMI on older models.
- After plugging in the cable, turn on both devices and check your TV's sound settings to confirm the soundbar is selected as the audio output.
- Bluetooth is a backup option if your soundbar supports it, but it adds delay and is not recommended for watching TV or movies.
- If sound does not come through after connecting, check that your TV's audio output is not set to the TV speakers — switch it to the soundbar in the TV's audio menu.
Checking your TV's audio settings after you plug in the cable
Once the cable is connected, your TV may not automatically send sound to the soundbar. Open your TV's settings menu and look for "Sound," "Audio," or "Speaker" settings. You should see an option that says "Audio Output" or "Speaker Output." Select the soundbar or external speaker option instead of "TV Speaker" or "Internal Speaker."
On Samsung TVs, this is under Settings > Sound > Speaker Settings. On LG TVs, it is Settings > Sound > Sound Out. On Sony TVs, it is Settings > Audio Setup > Speaker. On Roku TVs, it is Settings > Audio. The exact path varies, but the principle is the same: tell your TV to send sound somewhere other than its built-in speakers.
If you see a list of options and are not sure which one to pick, look for anything that says "Soundbar," "External Speaker," "HDMI," or "Optical." Avoid "TV Speaker" or "Internal Speaker." Once you select the right option, test it by playing something on your TV — you should hear sound from the soundbar, not the TV itself.
Bluetooth as a last resort
Some soundbars support Bluetooth, which means you can pair them to your TV without any cable. However, Bluetooth adds a noticeable delay between the picture and the sound — usually 100 to 200 milliseconds — which makes dialogue sound out of sync with lip movement. This is acceptable for music or podcasts but distracting for TV shows and movies.
Use Bluetooth only if your TV has no HDMI ARC port and no optical audio output. To pair via Bluetooth, put your soundbar in pairing mode (usually by holding a button on the remote or the soundbar itself for three seconds), then go to your TV's Bluetooth settings and select the soundbar from the list of available devices.
Soundbars with built-in WiFi or proprietary wireless connections
Some higher-end soundbars use WiFi or a proprietary wireless connection instead of cables. These usually come with a small receiver that plugs into your TV's optical or HDMI port, and the soundbar communicates with it wirelessly. If your soundbar came with a receiver, plug the receiver into your TV first, then follow the pairing instructions in the soundbar's manual.
Wireless soundbars are convenient because they eliminate cable clutter, but they are more expensive and require a power outlet near your TV for the receiver. They also sometimes lose connection if your WiFi is weak or if the soundbar is too far from the receiver. For most people, a wired connection is simpler and more reliable.
Troubleshooting: no sound from the soundbar
If you plugged everything in and still hear sound from your TV speakers instead of the soundbar, start with these steps. First, check that the cable is fully inserted into both the TV and the soundbar — a loose connection is the most common cause. Second, go back to your TV's audio settings and confirm that the soundbar is selected as the audio output, not the TV speaker. Third, check that the soundbar is powered on and that the input on the soundbar is set to the correct source (HDMI, Optical, or Bluetooth).
If the soundbar has a small LED light on the front, it should be lit or blinking. If it is dark, the soundbar is not receiving power — check that the power cable is plugged in and that the outlet works. If the light is on but you still hear the TV, unmute the soundbar using its remote or the button on the back. Some soundbars ship with the volume muted by default.
If you are using HDMI ARC and it is not working, try switching to optical instead. HDMI ARC can be finicky on some TV models, especially older ones. Optical is slower to set up but more reliable once it is working.
Frequently Asked Questions
Do I need a special HDMI cable for ARC?
No. Any HDMI cable works with ARC — you do not need to buy a cable labeled "ARC" or "eARC." The difference is in the port, not the cable. However, if you are using a very old or damaged HDMI cable, replacing it may fix connection problems.
Can I use both the soundbar and my TV speakers at the same time?
Most TVs do not allow this. When you select the soundbar as the audio output, the TV speakers turn off. If you want to use both, you would need to buy a separate audio splitter, which is rarely worth the cost or hassle. Pick one or the other.
What if my soundbar has no HDMI input, only optical?
Use the optical cable instead. Older soundbars and budget models often have only optical input. Optical works just as well as HDMI ARC — the only difference is that you cannot control the soundbar's volume with your TV remote unless the soundbar has a separate infrared receiver.
Will connecting a soundbar affect my TV's picture quality?
No. Audio and video travel on separate paths inside your TV. Plugging in a soundbar changes only the sound output, not the picture. Your TV will display video at the same resolution and quality as before.
How far can the soundbar be from the TV?
If you are using a wired connection (HDMI or optical), the soundbar can be as far as the cable reaches — typically 10 to 25 feet depending on cable length. If you are using Bluetooth or wireless, keep the soundbar within 30 feet of the TV and away from large metal objects or other wireless devices that might interfere.