The fastest way: HDMI with ARC or eARC
Most modern soundbars connect to your TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This is the simplest route because one cable carries both picture and sound, and your TV controls the soundbar's volume through your remote.
Check the back of your TV for a port marked HDMI ARC or HDMI eARC — usually it is HDMI 3 or HDMI 4, though the manual will confirm. Plug one end of an HDMI cable into that port and the other end into the HDMI input on your soundbar. Turn on both devices, set your TV's audio output to that HDMI port in the sound settings, and the connection is complete. Your TV remote will now control soundbar volume.
eARC is newer and faster than ARC, but both work the same way from a user's perspective. If your TV has eARC, use that port — it handles higher-quality sound formats. If your TV is older and has neither, move to the optical connection method below.
Key Takeaways
- HDMI ARC or eARC is the simplest method: one cable from your TV to the soundbar, and your TV remote controls volume.
- Optical cable is the second choice if your TV lacks HDMI ARC, and it requires no setup beyond plugging in and selecting the audio output in TV settings.
- Bluetooth works for streaming from phones and tablets but does not carry sound from your TV, so it is a supplement rather than a replacement for wired connections.
- After connecting, go into your TV's sound settings and select the soundbar as the audio output device so all TV sound routes through it.
- If you have a cable or satellite box, connect it directly to the soundbar instead of the TV to avoid audio delay and simplify the setup.
Optical cable: the backup when HDMI ARC is not available
If your TV does not have HDMI ARC or eARC, use an optical cable instead. This is a thin cable with a small square connector on each end, and it carries digital audio from your TV to the soundbar. Optical is older than HDMI ARC but works reliably on almost every TV made in the last 15 years.
Locate the optical audio output port on the back of your TV — it is usually labeled TOSLINK or S/PDIF and looks like a small square hole. Plug one end of the optical cable into that port and the other end into the optical input on your soundbar. Then go into your TV's sound settings, find the audio output menu, and select optical as the output. Your soundbar will now receive all sound from the TV.
Optical does not carry volume control signals the way HDMI ARC does, so you will use the soundbar's remote or buttons to adjust volume instead of your TV remote. This is the only real drawback — the connection itself is just as reliable as HDMI ARC.
Bluetooth: for phones and tablets, not your TV
Bluetooth is useful for streaming music or podcasts from your phone to the soundbar, but it does not work for TV sound because most TVs do not send audio over Bluetooth. If your soundbar has Bluetooth, use it as an extra feature for your phone — not as your main TV connection.
To pair your phone with the soundbar, press the Bluetooth button on the soundbar or in its app until the light blinks. Then go to your phone's Bluetooth settings, find the soundbar's name in the list, and tap it to connect. Once paired, any audio from your phone will play through the soundbar. But your TV sound will still need to go through HDMI ARC or optical.
Connecting a cable or satellite box directly to the soundbar
If you have a cable box, satellite receiver, or streaming device like a Roku or Apple TV, you can connect it directly to the soundbar instead of to the TV. This avoids a common problem called audio delay, where the sound lags slightly behind the picture.
Run an HDMI cable from your cable box or streaming device to the HDMI input on the soundbar. Then run a second HDMI cable from the HDMI output on the soundbar to the TV. This way, video and audio both pass through the soundbar before reaching the TV, and the soundbar handles all the audio processing. Your TV remote will still control volume because the soundbar and TV communicate through HDMI ARC on that second cable.
This setup is slightly more complex but solves lip-sync problems and gives you cleaner audio. It is worth doing if you notice the sound arriving a fraction of a second after you see someone's lips move.
Adjusting TV settings after you plug in the cable
After you connect the soundbar with HDMI ARC, optical, or both, you must tell your TV to send sound to the soundbar instead of to its own speakers. Go into your TV's settings menu, find the sound or audio section, and look for an option called audio output, speaker output, or sound output.
Select the HDMI ARC port if you used that cable, or select optical if you used the optical cable. Some TVs also have an option to turn off the TV's internal speakers — do that so no sound comes from the TV itself. Once you save these settings, all sound from the TV will route through the soundbar.
If you do not see these options in the main settings menu, check under advanced audio settings or external speakers. TV menus vary by brand, but the principle is the same: you are telling the TV which device to send audio to.
Troubleshooting when sound does not come through
If you plugged in the cable but hear nothing from the soundbar, first check that both devices are powered on and the cable is fully inserted into both ports. A loose connection is the most common cause.
Next, go back into your TV's audio output settings and confirm you selected the right port. If you used HDMI ARC but selected optical in the settings, the sound will not come through. If the settings look correct, try unplugging the soundbar for 30 seconds, then plugging it back in — this resets the connection.
If you still hear nothing, check whether your TV actually supports ARC on that HDMI port. Some older TVs label the port ARC but do not have the feature enabled. The TV manual will confirm whether ARC is supported. If it is not, switch to an optical cable instead.
Frequently Asked Questions
Do I need a special HDMI cable for ARC?
No. Any standard HDMI cable works with ARC and eARC. You do not need to buy a cable labeled ARC — the feature is built into the port itself, not the cable. A basic HDMI cable from any electronics store will work.
Can I use both HDMI and optical at the same time?
You can plug both cables in, but your TV will only send sound through one of them at a time. Go into audio settings and select which one you want to use. Using both simultaneously does not improve sound quality — pick one and stick with it.
Why is there a delay between the picture and sound?
Audio delay usually happens when your TV is processing the signal. Connecting your cable box or streaming device directly to the soundbar instead of the TV often fixes this. If delay persists, check your soundbar's settings for an audio sync or lip-sync adjustment option.
What if my soundbar does not have HDMI input?
Older soundbars often have only optical or analog inputs. Use the optical cable if available — it works just as well as HDMI ARC for TV sound. If your soundbar has neither, you may need to replace it, as most modern TVs no longer have analog audio outputs.
Will my TV remote control the soundbar volume?
Yes, if you use HDMI ARC or eARC. The TV sends volume commands through the HDMI cable, so your TV remote controls the soundbar. With optical cable, you must use the soundbar's remote or buttons to adjust volume.