The fastest way: HDMI with ARC or eARC

Most soundbars connect to a TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This one cable carries both the picture signal from your TV and the audio signal back to the soundbar. It is the simplest setup because you do not need a separate audio cable, and the TV remote often controls the soundbar volume automatically.

To use this method, locate the HDMI port on your TV marked ARC (Audio Return Channel) or eARC (enhanced Audio Return Channel). Most TVs made in the last five years have one. Plug one end of an HDMI cable into that port and the other end into the HDMI input on the back of your soundbar. Then turn on both devices. Your TV should recognize the soundbar within a few seconds, and you may see a notification on screen.

If your TV does not have ARC or eARC, or if the connection does not work, move to the optical cable method below. Do not assume the port is broken until you have tried a different HDMI cable—many connection problems are caused by a faulty cable, not a faulty port.

Key Takeaways

  • HDMI ARC or eARC is the simplest connection: one cable from the TV's ARC port to the soundbar's HDMI input, and audio flows both ways automatically.
  • If your TV lacks ARC, use an optical cable from the TV's optical audio output to the soundbar's optical input instead.
  • Bluetooth works for streaming from phones and tablets but not for TV audio on most soundbars, so do not rely on it as your main connection.
  • After connecting, check your TV's audio output settings to make sure sound is routed to the soundbar and not to the TV's built-in speakers.
  • If you hear no sound, swap the HDMI cable first—a bad cable causes most connection failures.

The optical cable method when HDMI ARC is not available

If your TV does not have an ARC port, or if HDMI ARC is not working, use an optical audio cable instead. This cable carries sound from the TV to the soundbar only—it does not carry picture. You will need a separate HDMI cable to connect your cable box, streaming device, or game console to the TV, but the TV will send audio to the soundbar through the optical cable.

Locate the optical audio output on the back of your TV. It is a small square port, usually labeled "Optical Out" or "TOSLINK," and it has a hinged plastic cover. Plug one end of an optical cable into this port and the other end into the optical input on the soundbar. The cable is keyed so it only fits one way. Turn on both devices and check that sound comes through the soundbar.

Optical cables are reliable and inexpensive, but they carry audio only. If you want the TV remote to control soundbar volume, you may need to enable that feature in the TV's settings menu under Audio or Sound Output. Not all TVs support this, so check your TV's manual if the remote does not work.

Checking your TV's audio output settings

After you plug in the cable, your TV may still be sending sound to its built-in speakers instead of the soundbar. To fix this, go to your TV's Settings menu and look for Audio, Sound, or Sound Output. The exact name depends on your TV brand—Samsung calls it Sound Output, LG calls it Audio Out, and Roku calls it Audio.

In that menu, you should see an option to choose where audio goes. Select the option that says HDMI ARC, eARC, Optical, or External Speaker—anything that is not the TV's internal speakers. Save the setting and test the soundbar. If you still hear sound from the TV's speakers, go back and make sure you selected the right output.

Some TVs have a separate setting for whether to send audio to external speakers when an HDMI device is connected. If you have a cable box or streaming device plugged into the TV, make sure that setting is turned on. Your TV manual or the manufacturer's website can show you the exact steps for your model.

Using Bluetooth for phones and tablets, not for TV audio

Many soundbars have Bluetooth, which lets you stream music or podcasts from your phone or tablet wirelessly. To connect via Bluetooth, put the soundbar in pairing mode—usually by holding a button on the remote or the soundbar itself for a few seconds until a light blinks. Then go to your phone's Bluetooth settings, find the soundbar's name in the list, and tap it to pair.

Bluetooth is convenient for personal audio, but it does not work for TV audio on most soundbars. The TV itself does not have Bluetooth that talks to the soundbar; only your phone or tablet does. If you want to hear the TV through the soundbar, you must use HDMI ARC, eARC, or an optical cable. Do not rely on Bluetooth as your main connection to the TV.

Troubleshooting when you hear no sound

If you have plugged in the cable but hear nothing from the soundbar, start by swapping the HDMI or optical cable for a different one. A faulty cable is the most common cause of no sound, and it is the fastest thing to rule out. If a new cable fixes it, the old cable is damaged and should be replaced.

If a new cable does not help, check that the soundbar is powered on and that the input on the soundbar is set to the right source. Most soundbars have a button or remote option to switch between HDMI, Optical, Bluetooth, and other inputs. Make sure it is set to whichever input you plugged the cable into. Then go back to your TV's audio settings and confirm that sound is routed to the external speaker or HDMI ARC, not to the TV's internal speakers.

If the soundbar still has no sound, try unplugging both the TV and the soundbar for 30 seconds, then plugging them back in. This resets the connection and often fixes handshake problems between devices. If that does not work, check the soundbar's manual for a factory reset option, or contact the soundbar manufacturer's support line.

When to use a receiver instead of a direct connection

If you have a cable box, game console, and streaming device all plugged into your TV, and you want all of them to play through the soundbar, a direct TV-to-soundbar connection works fine. The TV receives audio from all those devices and sends it to the soundbar.

However, if you want more control over which device plays through which speaker, or if you plan to add more speakers later, you might want to use an AV receiver instead. A receiver sits between your devices and your TV, and it routes audio and video the way you choose. This is more complex to set up but gives you more flexibility. For most people with a single soundbar, a direct TV connection is simpler and sufficient.

Frequently Asked Questions

Can I use both HDMI and optical cables at the same time?

You can plug both cables in, but the TV will only send audio through one of them. Go to your TV's audio settings and choose which one you want to use. Most TVs prioritize HDMI ARC if both are connected, but check your manual to be sure. Using only one cable keeps things straightforward.

Why does my TV remote not control the soundbar volume?

HDMI ARC and eARC support remote volume control, but optical cables usually do not. If you are using HDMI ARC and the remote still does not work, go to your TV's audio settings and look for an option like "Control External Speakers" or "HDMI Control." Turn it on and test the remote again.

Do I need a special HDMI cable for ARC?

No. Any standard HDMI cable works with ARC and eARC. You do not need to buy a cable labeled "ARC" or "Premium." If the cable is faulty, replace it with another standard HDMI cable. The difference between cables is usually build quality, not capability.

What if my soundbar only has RCA audio inputs, not HDMI or optical?

Older soundbars sometimes have RCA inputs instead of HDMI or optical. You will need an adapter cable that converts your TV's optical or HDMI output to RCA. These are inexpensive and available online. However, if your soundbar is that old, consider whether it is worth upgrading to a newer model with HDMI ARC, which is simpler to set up.

Can I connect the soundbar to a streaming device instead of the TV?

Yes, if your streaming device has HDMI ARC or optical output. Plug the soundbar into the device instead of the TV, and the device will send audio to the soundbar. However, if you also watch cable TV or use other devices, connecting to the TV is simpler because the TV receives audio from all sources and sends it to the soundbar in one place.