Connect Your Samsung Soundbar to Your TV

The fastest way to connect a Samsung soundbar is through HDMI, which carries both picture and sound in one cable. Plug one end into the HDMI port on the back of your soundbar labeled "HDMI In" or "HDMI ARC/eARC", and plug the other end into the HDMI ARC or eARC port on your TV. Check your TV manual to find which port supports ARC — it is usually HDMI 3 or HDMI 4, but varies by model.

If your TV does not have HDMI ARC, use an optical cable instead. Plug the optical cable into the optical port on the back of the soundbar and into the optical audio output on your TV. Optical cables are thinner and carry only sound, not video, but they work reliably with older TVs.

Once the cable is connected, turn on the soundbar and TV. The soundbar should detect the connection automatically. If you do not hear sound from the soundbar, go into your TV settings, find the audio output menu, and select the soundbar as the default speaker. The exact menu path depends on your TV brand — Samsung TVs have this under Settings > Sound > Speaker Settings, while LG and other brands place it elsewhere.

Key Takeaways

  • HDMI ARC is the best connection method because it sends both picture and sound through one cable and lets your TV remote control the soundbar volume.
  • Optical cable is a reliable backup if your TV lacks HDMI ARC, though it carries only audio and requires a separate remote.
  • After plugging in the cable, change your TV's audio output setting to the soundbar so sound does not play through the TV speakers.
  • Bluetooth pairing lets you play music from your phone or tablet, but does not work for TV sound unless you also use HDMI or optical.
  • Most Samsung soundbars need a power outlet within six feet, so plan your cable routing before you mount the unit.

Connect Your Soundbar to Your Phone or Tablet via Bluetooth

To play music from your phone or tablet through the soundbar, use Bluetooth. Press the Bluetooth button on the soundbar remote or on the soundbar itself — it is usually marked with a Bluetooth symbol. The soundbar will enter pairing mode and may flash a light or play a tone.

On your phone or tablet, go to Settings, find Bluetooth, and turn it on. Your Samsung soundbar should appear in the list of available devices. Tap it to pair. Once paired, your phone will remember the soundbar and connect automatically the next time you turn it on and the soundbar is in range.

Bluetooth works well for streaming music apps like Spotify or YouTube Music, but it does not work for TV sound. If you want to hear your TV through the soundbar, you must use HDMI or optical cable in addition to Bluetooth. The soundbar will switch between inputs automatically — it will play TV sound when the TV is on and switch to Bluetooth when you start playing music on your phone.

Set Up the Samsung SmartThings App for Remote Control

Samsung soundbars can be controlled through the SmartThings app on your phone, which lets you adjust volume, switch inputs, and change sound modes without the physical remote. read SmartThings from the Google Play Store or Apple App Store, create or sign in to your Samsung account, and open the app.

Make sure your soundbar and phone are on the same Wi-Fi network. Tap the plus icon in SmartThings to add a device, select your soundbar from the list, and follow the on-screen steps. Once added, you can control the soundbar from anywhere in your home as long as both devices are connected to Wi-Fi.

The app also shows you battery level on the remote, lets you set up routines (like turning the soundbar on when you open a specific app), and notifies you of firmware updates. Firmware updates add features and fix bugs, so check the app every few months and install them when prompted.

Troubleshoot No Sound or Low Volume

If you plugged in the soundbar but hear no sound, first check that the soundbar is powered on — look for a light on the front panel. Then check your TV settings. Go to Settings > Sound and make sure the soundbar is selected as the audio output, not the TV speakers. If the TV still shows internal speakers as the output, select the soundbar manually.

If the soundbar is selected but you still hear nothing, unplug the HDMI or optical cable, wait 10 seconds, and plug it back in. This resets the connection. If that does not work, restart both the soundbar and TV by unplugging them for 30 seconds.

If sound is very quiet, check the volume on both the soundbar remote and your TV remote. The TV volume and soundbar volume are separate — you may need to raise both. Also check that the soundbar is not in a muted mode. Some Samsung soundbars have a night mode or voice-boost mode that can make dialogue sound quiet; press the mode button on the remote to cycle through options.

Position Your Soundbar for the Best Sound

Place the soundbar on a shelf or stand directly below or above your TV, centered on the wall. Do not put it in a corner or inside a cabinet with doors closed, because walls and enclosed spaces muffle sound. If you must mount it on the wall, use the included wall-mount bracket and follow the instructions that came with your soundbar.

Keep the soundbar at least one foot away from other electronics like cable boxes or gaming consoles, because they can interfere with the wireless signal. If you have a subwoofer (a separate bass speaker), place it on the floor to the side of your TV or behind your couch — the exact spot matters less than keeping it away from the soundbar itself.

Make sure the power cable reaches an outlet without being stretched tight. A coiled or kinked power cable can overheat. If the outlet is far away, use a power strip rated for the soundbar's wattage — this information is on the back of the unit.

Connect a Samsung Subwoofer to Your Soundbar

If your soundbar came with a subwoofer or you bought one separately, it pairs wirelessly with the soundbar. Place the subwoofer in the room where you want it — typically on the floor to the side or behind your seating area. Plug it in and turn it on.

Press and hold the pairing button on the back of the subwoofer for about three seconds until the light flashes. The soundbar should detect it automatically within 30 seconds. Once paired, the light on the subwoofer will stop flashing and stay solid. The subwoofer will now play bass from your TV, music, and any other audio the soundbar receives.

If the subwoofer does not pair, make sure it is within 15 feet of the soundbar and that both are powered on. Unplug the subwoofer, wait 10 seconds, plug it back in, and try pairing again. If pairing still fails, check the manual that came with your soundbar — some models have a pairing button on the soundbar itself that you need to press first.

Update Your Soundbar Firmware

Samsung releases firmware updates for soundbars to add features, improve sound quality, and fix bugs. Check for updates through the SmartThings app by opening your soundbar, tapping the settings icon, and looking for a firmware or software update option. If an update is available, tap it and let the soundbar read and install it — this usually takes five to ten minutes.

Do not unplug the soundbar during an update. Leave it powered on and connected to Wi-Fi until the update finishes and the soundbar restarts on its own. After the update, test the soundbar to make sure it still works and sounds the same.

Frequently Asked Questions

Do I need a remote to use my Samsung soundbar?

No. You can control the soundbar through the SmartThings app on your phone, or use your TV remote if you connected the soundbar via HDMI ARC. However, the physical remote is the fastest way to adjust volume and switch inputs, and it works even if your Wi-Fi is down.

Can I use my Samsung soundbar with a non-Samsung TV?

Yes. Samsung soundbars work with any TV that has HDMI ARC, optical audio output, or Bluetooth. The connection process is the same — plug in the cable or pair via Bluetooth. You will not be able to use the SmartThings app to control it, but the physical remote will work.

What is the difference between HDMI ARC and HDMI eARC?

eARC is a newer, faster version of ARC that handles higher-quality audio formats. Both work with Samsung soundbars, and both let your TV remote control the soundbar volume. If your TV has an eARC port, use that. If it only has ARC, use that instead. The sound quality difference is small for most viewers.

Why is my soundbar not connecting to Bluetooth?

Make sure the soundbar is in pairing mode — press the Bluetooth button on the remote or soundbar until you see a light flash or hear a tone. Then go to your phone's Bluetooth settings and look for the soundbar in the list. If it does not appear, restart both devices and try again. If the soundbar is already paired to another device, unpair it first.

Can I use my soundbar with a projector instead of a TV?

Yes, if your projector has HDMI ARC or optical audio output. Connect the soundbar the same way you would to a TV. If your projector has neither, you can use a separate audio receiver between the projector and soundbar, or connect the soundbar to your streaming device (like a Roku or Apple TV) via HDMI instead.