The fastest way: HDMI with eARC

Most Samsung soundbars connect to your TV using a single HDMI cable plugged into the eARC port on the back of your TV. This port looks like any other HDMI slot but handles both picture and sound in both directions. Check your TV's manual or the back panel — it's usually labeled eARC or ARC, often HDMI 3 or HDMI 4.

Plug one end of an HDMI cable into that eARC port on your TV. Plug the other end into the HDMI input on the back of your Samsung soundbar. Turn on both devices. Your TV will automatically send sound to the soundbar, and you control the volume with your TV remote. No pairing, no setup menu — it just works.

If your TV doesn't have eARC, a regular HDMI port will work, but you'll need to manually switch the soundbar's input or use the soundbar remote to adjust volume. eARC is simpler because your TV remote controls everything.

Key Takeaways

  • HDMI eARC is the simplest connection: one cable from your TV's eARC port to the soundbar's HDMI input, and your TV remote controls the volume.
  • If your TV lacks eARC, use any HDMI port, but you'll need the soundbar remote to change volume or switch inputs.
  • Optical (TOSLINK) cable works if your TV has no HDMI eARC, though it carries sound only, not picture.
  • Bluetooth pairing is wireless but requires manual setup and works best for streaming from phones or tablets, not your TV.
  • After connecting, check your TV's sound settings to confirm the soundbar is selected as the audio output device.

Using an optical cable if your TV has no HDMI eARC

Older TVs and some budget models don't have eARC. In that case, use an optical cable (also called TOSLINK). It's a thin, square connector that carries sound only. Look on the back of your TV for a port labeled Optical Out or TOSLINK — it's usually a small square opening with a plastic cover.

Plug the optical cable into that port on your TV. Plug the other end into the Optical input on the back of your Samsung soundbar. Turn on both devices. The soundbar will receive sound from your TV automatically. You'll control volume with the soundbar remote, since optical doesn't send commands back to your TV.

Optical is reliable and works with nearly every TV made in the last 15 years. The trade-off is that you lose the two-way communication eARC provides — your TV remote won't control the soundbar.

Pairing your soundbar via Bluetooth

Samsung soundbars can connect wirelessly using Bluetooth, though this method is less common for TV use. Bluetooth works best when you're streaming from a phone or tablet, not from your TV's built-in apps. If you want to try it, press and hold the Bluetooth button on the back of the soundbar until the light blinks blue.

On your TV, go to Settings, then Sound or Audio, then Bluetooth. Select your Samsung soundbar from the list. Once paired, your TV will send sound to the soundbar wirelessly. The downside: Bluetooth can drop the connection if something blocks the signal, and setup takes longer than plugging in a cable.

For everyday TV watching, HDMI or optical is more stable. Use Bluetooth if you're moving the soundbar around or want to pair it with multiple devices.

Checking your TV's sound output settings

After you plug in the cable, your TV might still send sound to its own speakers instead of the soundbar. Go to your TV's Settings menu, then Sound or Audio. Look for an option called Speaker Output, Audio Output, or Sound Output. Select External Speaker or Soundbar from the list.

On Samsung TVs, this is usually under Settings > Sound > Speaker Settings. On LG, it's Settings > Sound > Sound Out. On other brands, the path varies, but the principle is the same: you're telling the TV where to send the audio. Once you select the soundbar, the TV's built-in speakers will go silent and all sound goes through the soundbar.

If you don't see the soundbar listed, the cable connection didn't register. Unplug the cable, wait 10 seconds, and plug it back in. Then check the sound settings again.

What to do if the soundbar doesn't receive sound

If you've plugged everything in but hear nothing from the soundbar, start with the basics: make sure the soundbar is powered on (look for a light on the front), and check that the volume isn't muted. Press the mute button on the soundbar remote — it's usually marked with a speaker icon with a line through it.

Next, confirm the soundbar's input is set to HDMI or Optical, depending on which cable you used. Most Samsung soundbars have an Input button on the remote or back panel. Cycle through the inputs until you see the one you're using light up or display on the soundbar's small screen.

If the soundbar still doesn't work, unplug it for 30 seconds and plug it back in. This resets the connection. Then check your TV's sound settings again to make sure the soundbar is selected as the audio output. If you're using HDMI, also confirm your TV's HDMI port is actually eARC — check the manual if you're unsure.

Connecting a soundbar to a TV without HDMI or optical ports

Some very old TVs or specialized displays lack both HDMI eARC and optical ports. In this case, Bluetooth is your only wireless option. Pair the soundbar as described above, and it will work for any audio your TV can send via Bluetooth.

If Bluetooth doesn't work or your TV doesn't support it, you may need an adapter. An HDMI-to-optical converter (a small box that plugs into HDMI and outputs optical) can bridge the gap, though this adds cost and another device to manage. For most people, upgrading to a TV with eARC is simpler in the long run.

Frequently Asked Questions

Can I use both the TV speakers and the soundbar at the same time?

Most TVs won't let you do this — once you select the soundbar as the audio output, the TV speakers turn off. Some soundbars have a "TV Speaker" mode that lets you hear both, but it's rare. If you want to use the TV speakers sometimes, you'll need to go back into Sound settings and switch the output back to TV Speaker.

Do I need a special HDMI cable for eARC?

No. Any standard HDMI cable works with eARC. You don't need to buy an expensive "eARC cable" — the feature is built into the port, not the cable. A basic HDMI cable from any electronics store will do the job.

Why does my soundbar keep losing connection?

If you're using Bluetooth, interference from other wireless devices or physical obstacles can cause drops. Move the soundbar closer to the TV or remove obstacles between them. If you're using HDMI or optical, a loose cable is the most common cause — unplug and reseat both ends firmly. If the problem persists, try a different cable.

Can I control the soundbar volume with my TV remote?

Yes, but only if you're using HDMI eARC. With eARC, your TV remote controls the soundbar volume automatically. With optical or Bluetooth, you'll need the soundbar remote to adjust volume. Some soundbars let you program your TV remote to control them, but this requires extra setup steps in the soundbar's menu.

What if my TV doesn't recognize the soundbar after I plug it in?

Restart both devices: unplug the soundbar and TV for 30 seconds, then plug them back in. If you're using HDMI, make sure you're plugged into the eARC port, not a regular HDMI port. Check your TV manual to confirm which port is eARC. If the soundbar still doesn't show up in your sound settings, the cable may be faulty — try a different one.