The fastest way: HDMI ARC or eARC
Most Sony soundbars connect to your TV using a single HDMI cable plugged into the HDMI ARC port on your TV. ARC stands for Audio Return Channel — it sends sound from your TV back to the soundbar, so you hear everything through one speaker instead of the TV's tiny built-in speakers. This is the method Sony recommends because it requires the fewest cables and works with all your TV inputs at once.
Find the HDMI ARC port on your TV first. It is usually labeled "HDMI ARC" or "HDMI eARC" and is typically HDMI port 3 or 4 (check your TV manual if you are unsure). Plug one end of an HDMI cable into that port and the other end into the HDMI OUT port on the back of your Sony soundbar. Power on both devices. Your soundbar should recognize the connection automatically within a few seconds.
If your TV and soundbar both support eARC (enhanced Audio Return Channel), you get better sound quality and faster data transfer, but the setup is identical — just use the same HDMI ARC port. Your devices will negotiate the best connection type on their own.
Key Takeaways
- HDMI ARC is the simplest connection: one cable from your TV's ARC port to the soundbar's HDMI OUT port.
- You must enable HDMI ARC in your TV's audio settings after plugging in the cable, or sound will not route to the soundbar.
- If HDMI ARC does not work, try optical audio (TOSLINK) as a backup — it requires a separate cable but works on older TVs.
- Bluetooth is an option for music streaming but does not work for TV shows and movies because of audio delay.
- Test the connection by turning up the volume on the soundbar itself, not the TV remote, to confirm sound is actually coming through.
Enable HDMI ARC in your TV settings
Plugging in the cable is only half the job. Your TV has a setting that must be turned on for the soundbar to receive sound. On most TVs, this setting is called "HDMI ARC" or "eARC" and lives in the audio or sound menu. The exact path varies by TV brand, but the process is the same.
Press the Menu or Settings button on your TV remote. Look for an option labeled Sound, Audio, or Speaker Setup. Inside that menu, find HDMI ARC or eARC and toggle it to On. Some TVs also have a setting called "TV Speaker" that you should turn Off so sound does not split between the TV and soundbar. Save your changes and exit the menu.
If you cannot find the setting, check your TV's manual or search "[Your TV brand] enable HDMI ARC" online — the steps are usually the same across models from the same manufacturer. Once enabled, your soundbar should light up or display a confirmation message showing it has received the signal.
Optical audio (TOSLINK) as a backup option
If your TV does not have an HDMI ARC port, or if HDMI ARC is not working, optical audio is the next best choice. It uses a thin cable with a square connector (called TOSLINK) to send sound from your TV to the soundbar. The connection is reliable and works on almost all TVs made in the last 15 years.
Locate the optical audio port on your TV — it is usually labeled "Optical Out" or "TOSLINK" and looks like a small square hole. Plug one end of an optical cable into that port and the other end into the optical input on the back of your Sony soundbar. Power on both devices.
Like HDMI ARC, you may need to tell your TV to send sound through the optical port. Go to your TV's audio settings and look for an option like "Audio Output" or "Speaker Output." Select Optical or External Speaker, then save. Test by playing something on your TV — you should hear it through the soundbar, not the TV speakers.
Bluetooth for music streaming only
Sony soundbars support Bluetooth, which is useful for playing music from your phone or tablet. However, Bluetooth has a delay of about 100 to 200 milliseconds, which means the sound arrives slightly after the picture. This makes it unsuitable for TV shows and movies, where lips will not match the words you hear.
To pair your phone or tablet via Bluetooth, press the Bluetooth button on your soundbar remote or the soundbar itself. The soundbar will enter pairing mode (usually indicated by a blinking light). On your phone, go to Settings, find Bluetooth, and select your Sony soundbar from the list. Once paired, you can play music and it will come through the soundbar.
Do not use Bluetooth for your TV connection. Stick with HDMI ARC or optical audio for all TV content, and use Bluetooth only when you want to stream music from a mobile device.
Troubleshooting: No sound from the soundbar
If you have plugged everything in but hear nothing, start with the simplest checks. Make sure the soundbar is powered on — look for a light on the front panel. Turn up the volume on the soundbar itself using its remote or the buttons on the back. Many people accidentally leave the soundbar muted or at zero volume while the TV remote is turned up.
Next, check that HDMI ARC is enabled on your TV. Go back into your TV's audio settings and confirm the setting is toggled On. If it is already on, try turning it off and back on again — sometimes this resets the connection. Wait 10 seconds between each step.
If you are using optical audio, make sure the cable is fully inserted into both ports — optical connections are tight and can appear plugged in when they are actually loose. Gently push the cable in until you hear a click. If the cable is old or damaged, try a different one to rule out a bad connection.
As a last resort, unplug both the TV and soundbar for 30 seconds, then plug them back in. This clears any temporary glitches in the handshake between devices. Once they restart, test again.
Adjusting volume and sound settings
After the soundbar is connected and producing sound, you may want to adjust how loud it gets and how it processes audio. Use the soundbar's remote to control volume — do not rely on the TV remote, because the TV remote controls the TV's speakers, not the soundbar.
Most Sony soundbars have preset sound modes like Movie, Music, or Standard. Try each one while watching something you know well — a favorite show or movie — and pick the mode that sounds best to you. Some soundbars also have a night mode that compresses loud sounds so you can watch late without disturbing others.
If the soundbar is too quiet even at full volume, check that your TV is sending audio at full strength. In your TV's audio settings, look for a setting called "Audio Level" or "PCM Level" and make sure it is set to Normal or Maximum, not Reduced.
Connecting a second soundbar or adding a subwoofer
Some Sony soundbar models support adding a wireless subwoofer or a second soundbar for surround sound. If your soundbar came with a subwoofer, follow the pairing instructions in the manual — usually you press a button on both devices to sync them wirelessly. The subwoofer does not connect to the TV; it only connects to the soundbar.
If you want to add surround speakers or a second soundbar later, check Sony's website or your soundbar's manual to see which models are compatible. Not all Sony soundbars support expansion, so verify before buying additional equipment.
Frequently Asked Questions
Do I need to use HDMI ARC or can I just plug the soundbar into the TV with a regular HDMI cable?
A regular HDMI cable will not work for soundbars. You must use the HDMI ARC or eARC port on your TV, which is specifically designed to send audio back to external speakers. Plugging into a regular HDMI port will not produce any sound.
My TV does not have an HDMI ARC port. What should I do?
Use an optical audio cable instead. It is inexpensive and widely available at electronics stores. Optical audio works on almost all TVs made in the last 15 years and provides good sound quality, though not quite as good as HDMI ARC.
Can I use both HDMI ARC and optical audio at the same time?
You can plug both cables in, but your TV will only send sound through one at a time. Choose one in your TV's audio settings and stick with it. Using both simultaneously can cause confusion and audio dropouts.
Why is there a delay between the picture and sound when I use Bluetooth?
Bluetooth has built-in latency — a slight delay in transmission — that makes it unsuitable for video. Always use HDMI ARC or optical audio for TV content. Bluetooth is fine for music from your phone because there is no picture to sync with.
Do I need to update my soundbar's firmware after connecting it?
Check your soundbar's manual or Sony's support website to see if a firmware update is available. Updates can improve compatibility and add features, but they are not required for basic operation. If your soundbar is working, you can update later at your convenience.