The fastest way to connect your soundbar
Most Sony TVs connect to a soundbar through a single cable plugged into the TV's audio-out port, usually labeled HDMI eARC or optical audio. The soundbar's remote then controls the volume. You do not need to pair devices wirelessly or adjust settings in a menu—plug the cable in, turn on the soundbar, and it works.
If your TV and soundbar both have HDMI eARC ports (the newer standard), use that connection first. If your soundbar is older or your TV does not have eARC, an optical cable is the next best choice. Bluetooth is the slowest option and should only be your backup if neither cable method is available.
Key Takeaways
- HDMI eARC is the best connection method because it carries both picture and sound through one cable and lets the soundbar remote control TV volume.
- Optical audio cables work with almost any soundbar and TV combination, though they only carry sound, not video.
- After plugging in the cable, you may need to change one TV setting: go to Sound or Audio settings and select the soundbar as the output device.
- If the soundbar has no sound after connecting, check that the TV's audio output is not muted and that the soundbar is powered on and set to the correct input.
Connecting with HDMI eARC (the best option)
HDMI eARC is the newest connection standard and works with most Sony TVs made after 2017. Look at the back of your TV for a port labeled HDMI 3/eARC or HDMI 4/eARC—it is usually the last HDMI port on the right side. Plug one end of an HDMI cable into that port and the other end into the soundbar's HDMI eARC input.
Turn on both devices. On your Sony TV remote, press the Home button, then go to Settings > Sound > Audio Output. Select Soundbar or External Speaker from the list. The TV will now send all sound to the soundbar, and your soundbar's remote will control the volume when you press up or down.
If the soundbar does not appear in the Audio Output menu, unplug both devices for 30 seconds, plug them back in, and wait two minutes for them to recognize each other. Then check the menu again.
Connecting with an optical audio cable (if eARC is not available)
An optical cable looks like a thin black cord with a small square connector on each end. Locate the Optical Audio Out port on the back of your Sony TV—it is usually labeled with a small red or orange light symbol. Plug the optical cable into that port, then plug the other end into the soundbar's optical input.
Turn on the soundbar and set it to Optical input using its remote or front panel button. On your TV, press Home, then go to Settings > Sound > Audio Output and select Optical or External Speaker. The soundbar should now play all TV audio.
Optical cables do not carry the remote control signal back to the TV, so you will need to use your TV remote to adjust volume, not the soundbar remote. This is the main drawback compared to eARC.
Using Bluetooth if you have no cable ports
Bluetooth is wireless but slower and less reliable than a cable. Use it only if your soundbar has no optical input and your TV has no eARC port. On your Sony TV, press Home and go to Settings > Bluetooth > Bluetooth Devices. Set the TV to pairing mode.
On the soundbar, press and hold the Bluetooth button (usually on the back or side) until a light blinks. The TV should find the soundbar within 10 seconds. Select it from the list on your TV screen. Once paired, the soundbar will connect automatically when both devices are powered on.
Bluetooth can drop the connection if something is in the way or if the devices are too far apart (more than 30 feet). If sound cuts out, move the soundbar closer to the TV or remove obstacles between them.
Troubleshooting when there is no sound
If you plugged in the cable but hear nothing, first check that the soundbar is powered on—look for a light on the front panel. Then press the input button on the soundbar remote and make sure it is set to the correct input (HDMI, Optical, or Bluetooth, depending on which cable you used).
On your TV, press Home and go to Settings > Sound > Audio Output. Make sure the soundbar or external speaker is selected, not TV Speaker. If the TV Speaker is selected, the sound will come from the TV's tiny built-in speakers instead of the soundbar.
If you still hear nothing, check that the volume on the soundbar itself is not turned all the way down. Use the soundbar's remote to turn the volume up to at least 20. If the soundbar has a mute button (often marked with an M or a speaker with a line through it), press it to unmute.
Common mistakes that prevent the connection from working
The most common error is plugging the soundbar cable into the wrong TV port. HDMI eARC only works in the specific eARC port—plugging it into a regular HDMI port will not work. Check your TV manual or look for the eARC label printed next to the port.
Another frequent mistake is forgetting to change the TV's audio output setting. Many people plug in the cable and expect sound when ready, but the TV is still sending audio to its own speakers. You must go into Settings and select the soundbar as the output device, as described above.
A third mistake is using a damaged or low-quality cable. If you are using an optical cable, make sure both ends are clean and the cable is not bent or kinked. If you are using HDMI, try a different HDMI cable if one is available—some cables are defective.
Controlling the soundbar with your TV remote
If you connected via HDMI eARC, your Sony TV remote will control the soundbar's volume automatically. Press the volume up or down buttons on your TV remote and the soundbar volume will change. This works because eARC sends the remote signal back through the HDMI cable.
If you connected via optical cable, your TV remote will not control the soundbar volume. You will need to use the soundbar's own remote to adjust volume. Some soundbars have a learning feature that lets them copy commands from your TV remote, but this requires setup in the soundbar's menu.
If you want your TV remote to control an optically connected soundbar, check the soundbar manual for a Remote Learning or IR Learning option. This lets the soundbar learn your TV remote's volume buttons so it responds to them.
Frequently Asked Questions
Do I need to use HDMI eARC or can I use a regular HDMI cable?
A regular HDMI cable will not work for audio output from a TV to a soundbar. You must use the specific eARC port, which is labeled on your TV. Regular HDMI ports on a TV do not send audio out—they only receive video and audio from external devices like cable boxes.
Can I connect the soundbar to my cable box instead of the TV?
Yes. Plug the soundbar into your cable box or streaming device using HDMI eARC or optical audio, and the soundbar will play sound from that device. However, you will not hear TV menu sounds or system audio. Most people connect the soundbar to the TV so it plays all audio from every input.
What if my soundbar has HDMI input but my TV does not have eARC?
Use an optical cable instead. HDMI input on a soundbar is for connecting other devices like a gaming console or streaming box, not for connecting to a TV without eARC. The TV's optical output is the right choice for older TVs.
Will the soundbar work if I connect it to the TV with Bluetooth while the cable box is plugged into the TV with HDMI?
Yes. The soundbar will play audio from the cable box through the TV via Bluetooth. However, there may be a slight delay (usually under one second) between the picture and the sound, which is noticeable during fast action scenes. A cable connection avoids this delay.
Can I use both the soundbar and the TV speakers at the same time?
No. When you select the soundbar as the audio output in the TV settings, the TV speakers turn off. If you want to switch back to the TV speakers, go to Settings > Sound > Audio Output and select TV Speaker. You can switch between them whenever you want.