The fastest way: HDMI with ARC or eARC

Most modern soundbars connect to your TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This is the simplest setup because one cable carries both picture and sound, and your TV remote often controls the soundbar volume automatically. If your TV has eARC (the newer standard), use that port — it handles higher-quality audio formats and future devices more reliably than standard ARC.

To set this up: plug one end of an HDMI cable into the HDMI ARC or eARC port on your TV, and the other end into the HDMI input on the back of your soundbar. Then go into your TV's settings menu, find the audio or sound output section, and select the soundbar as your speaker. Your TV will now send all sound through the soundbar instead of its built-in speakers. Most TVs mute their own speakers automatically once you do this.

If your TV does not have ARC or eARC, or if you cannot find those ports, move to the optical cable method below — it works on almost every TV made in the last 15 years.

The optical cable method for older TVs

An optical cable (also called a Toslink cable) is a thin fiber-optic cord that carries digital sound from your TV to the soundbar. It is slower than HDMI but more reliable on older equipment, and it costs $10 to $20. Look for a small square port on the back of your TV labeled "Optical Out" or "Toslink Out" — if you see it, your TV supports this method.

Plug one end of the optical cable into that port on your TV and the other end into the optical input on the back of your soundbar. Then go into your TV's audio settings and select optical as the audio output. The soundbar should power on automatically and begin playing sound. If it does not, check that the soundbar is plugged in and that the optical input is selected on the soundbar itself — most soundbars have a small button or remote control option to switch between inputs.

Optical cables do not carry the newest audio formats (like Dolby Atmos), but they work reliably with all standard TV broadcasts, streaming apps, and cable boxes. If you only watch regular TV or Netflix, optical is perfectly adequate.

Key Takeaways

  • HDMI ARC or eARC is the best choice if your TV has one of these ports, because it requires only one cable and usually works with your TV remote.
  • An optical cable is the fallback option for older TVs without ARC, and it costs $10 to $20 but works reliably for standard sound.
  • After plugging in the cable, you must go into your TV's audio settings and select the soundbar as the output device — the connection alone is not enough.
  • If your soundbar has a power button or remote control, make sure it is turned on and set to the correct input after you connect the cable.

Wireless Bluetooth connection as a backup

Most soundbars can also connect via Bluetooth, which means no cable at all. This is useful if your TV does not have ARC, optical, or HDMI ports, or if you want to move the soundbar around without rewiring. The tradeoff is that Bluetooth can have slight audio delay on some TVs, which makes dialogue sound out of sync with lip movement.

To pair via Bluetooth: press and hold the Bluetooth button on the back or bottom of your soundbar (or use its remote control) until a light blinks. Then go into your TV's Bluetooth settings, search for available devices, and select your soundbar by name. Once paired, your TV will remember the connection and reconnect automatically when both devices are powered on.

Bluetooth works well for casual watching, but if you notice the sound lags behind the picture, switch back to a wired connection. Wired connections (HDMI or optical) do not have this delay.

What to do if sound still does not come through

Check these things in order: First, make sure the soundbar is powered on — look for a light on the front. Second, verify that your TV is actually sending sound to the soundbar by going back into the audio settings and confirming the soundbar is selected as the output. Third, turn the soundbar volume up using its remote control or the button on the back — it may be muted or set very low.

If you used an optical cable, make sure both ends are pushed in firmly and that the cable itself is not bent or damaged. If you used HDMI, try a different HDMI cable if you have one available — some cables are defective. If you used Bluetooth, unpair the soundbar from your TV, restart both devices, and pair them again from scratch.

If none of these steps work, check your soundbar's manual or the manufacturer's website to see if there is a factory reset button or procedure. A reset clears any bad pairing or setting and often solves connection problems.

Connecting a cable box or streaming device to the soundbar

If you have a cable box, satellite box, or streaming device (like a Roku or Apple TV), you can connect it directly to the soundbar instead of to the TV. This gives you more control over which device the soundbar listens to. Plug an HDMI cable from the cable box into an HDMI input on the soundbar, then plug another HDMI cable from the soundbar into the HDMI ARC port on your TV. This way, sound from the cable box goes straight to the soundbar, and the TV still receives the picture.

This setup is useful if you want the soundbar to play sound from your cable box but not from your TV's built-in apps. However, it adds complexity — you will need to manage two HDMI connections instead of one. For most people, connecting the soundbar directly to the TV is simpler and works just as well.

Soundbar placement and speaker settings

After the cable is connected and sound is working, position the soundbar on a shelf or stand directly below or above your TV, or mounted on the wall. Avoid putting it inside a cabinet with the door closed, because the sound will be muffled. If your soundbar has a subwoofer, place that on the floor to the side of your TV — the subwoofer does not need to be centered, and it can sit several feet away from the soundbar itself.

Once everything is in place, check your TV's audio settings one more time. Some TVs have an option to turn off surround sound or to adjust the audio format — if you are using an optical cable, make sure the TV is set to output standard stereo or Dolby Digital, not a newer format that optical cannot handle. If you are using HDMI ARC, your TV should automatically detect the soundbar and adjust the format on its own.

Frequently Asked Questions

Do I need a special HDMI cable for ARC?

No. Any standard HDMI cable works with ARC or eARC. The difference is in the port on your TV, not the cable itself. If you already have an HDMI cable at home, try it first before buying a new one.

Can I use both the soundbar and my TV speakers at the same time?

Most TVs automatically mute their built-in speakers when you select the soundbar as the audio output. If your TV does not do this, go into the audio settings and look for an option to disable the TV speakers or set them to "off." Playing both at once creates an echo and wastes power.

Why is there a delay between the picture and the sound?

This usually happens with Bluetooth connections. Switch to a wired connection (HDMI or optical) to eliminate the delay. If you are already using a wired connection, check your TV's audio settings for a "lip sync" or "audio delay" option and adjust it forward or backward a few milliseconds until the sound matches the picture.

What if my soundbar does not have an HDMI input?

Older soundbars often have only optical or analog inputs. Use an optical cable if your TV has an optical output port. If your TV does not have optical, you can buy an HDMI-to-optical converter for $20 to $40, which plugs into your TV's HDMI ARC port and converts the signal to optical.

Can I connect my soundbar to multiple devices?

Yes, if your soundbar has multiple inputs (HDMI, optical, and Bluetooth). You can plug your cable box into one input and your streaming device into another, then use the soundbar's remote or front panel button to switch between them. Some soundbars also let you pair multiple Bluetooth devices and switch between them automatically based on which one is playing sound.