The fastest way: HDMI with ARC

Most soundbars connect to your TV using a single HDMI cable plugged into the HDMI ARC port on your TV. ARC stands for Audio Return Channel — it sends sound from your TV back to the soundbar through the same cable that would normally send a picture forward. This is the simplest setup because one cable handles everything: the picture goes to your TV, and the sound comes back out through the soundbar.

Find the HDMI port labeled ARC or eARC on your TV — usually it's HDMI 3 or HDMI 4, and the manual or TV menu will confirm which one. Plug one end of an HDMI cable into that port and the other end into the HDMI input on your soundbar. Turn on both devices. The soundbar should light up and show it's connected within a few seconds. If your TV has a menu option for HDMI ARC or eARC, turn it on — this tells the TV to send audio through that cable.

Test it by playing something on your TV. If you hear sound from the soundbar instead of the TV speakers, you're done. If not, go to your TV's audio settings and select the soundbar as the output device.

Key Takeaways

  • HDMI ARC is the easiest connection: one cable from your TV's ARC port to the soundbar's HDMI input handles both picture and sound.
  • If your TV doesn't have HDMI ARC, use an optical cable from the TV's optical audio output to the soundbar's optical input.
  • Bluetooth works for streaming from phones and tablets but not for TV sound, because TV speakers turn on automatically and block the soundbar.
  • After connecting, go into your TV's audio settings and select the soundbar as the output device so sound doesn't play from the TV speakers.
  • If you hear no sound, check that the soundbar is powered on, the cable is fully inserted, and the TV's audio output is not set to "Internal Speakers."

Optical cable: the backup when HDMI ARC isn't available

If your TV doesn't have an HDMI ARC port, or if you already have something plugged into it, use an optical audio cable instead. This is a thin cable with a small square connector on each end. One end plugs into the optical audio output on your TV (usually labeled "Optical Out" or "SPDIF"), and the other end plugs into the optical input on your soundbar.

Optical cables are inexpensive — usually $5 to $15 — and work reliably. The trade-off is that you need a separate cable, and you may need to tell your TV to send sound through the optical port instead of the built-in speakers. Go to your TV's audio settings, find the output option, and select "Optical" or "External Speaker."

Optical works for everything your TV plays: cable, streaming apps, and built-in apps. It does not work for sound from external devices like a gaming console or Blu-ray player unless you run their audio through the TV first.

Bluetooth: wireless, but only for your phone or tablet

Most soundbars have Bluetooth, which lets you stream music or podcasts from your phone without a cable. To connect, put the soundbar in pairing mode — usually by holding a button on the remote or the soundbar itself for three seconds until a light blinks. Then go to your phone's Bluetooth settings, find the soundbar's name, and tap it. Once paired, audio from your phone plays through the soundbar.

Bluetooth is convenient for personal devices, but it won't work for your TV's sound. Even if you pair the soundbar via Bluetooth, your TV's built-in speakers will turn on automatically and play at the same time, creating an echo or muddled sound. Always use HDMI ARC or optical for TV audio.

If you want to use Bluetooth and also hear your TV through the soundbar, you'll need to disable the TV's internal speakers in the audio settings. Some TVs allow this; others don't. Check your TV's manual or settings menu to see if "Internal Speakers" or "Speaker Output" can be turned off.

What to do if you hear nothing after connecting

Start with the simplest checks: Is the soundbar powered on? Is the cable fully inserted into both the TV and the soundbar? Loose connections are the most common reason sound doesn't work. Unplug the cable, look at both connectors to make sure they're clean, and plug it back in firmly until you hear or feel a click.

Next, check your TV's audio settings. Go to Settings or Audio, and look for an option called "Sound Output," "Audio Output," or "Speaker Settings." Make sure it's set to the soundbar or external speaker, not "Internal Speakers" or "TV Speaker." If the soundbar appears as an option but isn't selected, select it and save.

If the soundbar still produces no sound, try a different HDMI port on your TV — not all ports support ARC. If you switched to optical, make sure your TV's audio settings show "Optical" as the output. Restart both devices: unplug the soundbar for 10 seconds, plug it back in, and do the same with the TV. This clears temporary glitches that prevent sound from flowing.

Connecting a soundbar to a TV without HDMI or optical ports

Older TVs sometimes have neither HDMI ARC nor an optical port. In this case, you have two options: use a 3.5mm audio cable (the thin cable with a round connector on each end) from the TV's headphone jack to the soundbar's audio input, or use Bluetooth if your soundbar supports it.

The 3.5mm cable works but requires you to manually adjust the TV's volume — the remote won't control the soundbar's volume the way it does with HDMI ARC or optical. Bluetooth is simpler if available, though you'll still need to disable the TV's internal speakers if possible to avoid hearing both at once.

If your TV is very old and has only RCA audio outputs (two round connectors, usually red and white), you can buy an RCA-to-3.5mm adapter for $5 to $10 and use that with a 3.5mm cable to the soundbar.

Setting up the soundbar's remote to control your TV volume

With HDMI ARC, most soundbars can control your TV's volume using the soundbar's remote. This happens automatically in many cases, but if it doesn't work, check the soundbar's manual for a pairing or setup step. Some soundbars require you to press a specific button combination to teach the remote your TV's brand.

If the soundbar remote still won't control the TV volume, you can use your TV's remote to adjust the soundbar volume instead. Go to your TV's audio settings and look for "External Speaker Volume" or "Soundbar Volume Control." Some TVs let you link the two so one remote controls both.

With optical or 3.5mm connections, the soundbar remote usually controls only the soundbar's volume, not the TV's. You'll use your TV remote to adjust the TV's volume and the soundbar remote to adjust the soundbar's volume separately.

Connecting multiple devices to your soundbar

If you want to use the soundbar with a gaming console, Blu-ray player, or streaming device in addition to your TV, connect those devices to your TV first, not directly to the soundbar. Run their audio through the TV, and then send that audio to the soundbar via HDMI ARC or optical. This way, one cable from the TV to the soundbar handles sound from everything.

Alternatively, if your soundbar has multiple HDMI inputs, you can plug devices directly into the soundbar. The soundbar will then send the picture to your TV through a separate HDMI cable. Check your soundbar's manual to see if it supports this setup — not all soundbars do.

If you're using Bluetooth to stream from your phone, you can still have the TV connected via HDMI ARC or optical. Switch between them using the soundbar's input button on the remote. This lets you listen to your TV one moment and your phone the next without unplugging anything.

Frequently Asked Questions

Can I use both HDMI ARC and optical at the same time?

Technically yes, but your soundbar will only play audio from one input at a time. Most soundbars default to HDMI ARC if both are connected. If you want to switch between them, use the soundbar's input button on the remote. There's no benefit to connecting both unless you're switching between devices regularly.

Why does my soundbar have sound from my phone but not my TV?

Your TV's internal speakers are probably still on. Go to your TV's audio settings and turn off "Internal Speakers" or set the audio output to "External Speaker" or "Soundbar." If the soundbar is connected via HDMI ARC, make sure HDMI ARC is enabled in your TV's settings. If it's optical, confirm the TV is set to output audio through the optical port.

Do I need a special HDMI cable for ARC?

No. Any standard HDMI cable works with ARC. You don't need to buy an expensive "ARC cable" — a basic HDMI cable costs $5 to $10 and performs identically. The ARC feature is built into the TV and soundbar, not the cable.

What if my TV doesn't recognize the soundbar after I plug it in?

Restart both devices. Unplug the soundbar for 10 seconds, plug it back in, and restart your TV. If you're using HDMI ARC, try a different HDMI port — not all ports support ARC. Check your TV's manual to confirm which port is the ARC port. If you're using optical, make sure the cable is fully inserted and the TV's audio output is set to "Optical."

Can I use a soundbar with a TV that has no audio output at all?

If your TV has HDMI inputs but no separate audio outputs, it almost certainly has HDMI ARC on at least one port. Use that. If it truly has no audio output of any kind, the TV cannot send sound to an external speaker — this is extremely rare on modern TVs and would require contacting the TV manufacturer.