The Three Ways to Connect a Bose Soundbar
Most Bose soundbars connect to your TV using one of three methods: HDMI with ARC (the fastest and most common), optical cable, or Bluetooth wireless. Which one you use depends on what ports your TV has and what's already plugged in behind your set. HDMI ARC is the best choice if your TV supports it, because it carries both picture and sound through one cable and lets your TV remote control the soundbar volume.
Before you start, locate the ports on the back of your TV and the back of your soundbar. You'll need to know whether your TV has an HDMI ARC port (usually labeled ARC or eARC), an optical audio port (a small square opening), or just regular HDMI ports. Most TVs made in the last five years have at least one HDMI ARC port.
Key Takeaways
- HDMI ARC is the simplest connection method and lets your TV remote control the soundbar volume without extra setup.
- Your TV must have an HDMI ARC or eARC port, which is usually one specific HDMI port (often HDMI 3 or 4) rather than all of them.
- Optical cable works on older TVs that don't have HDMI ARC, but requires manual volume control on the soundbar.
- Bluetooth wireless is the easiest to set up but can drop connection if obstacles block the signal between TV and soundbar.
- After connecting, you may need to change your TV's audio output settings so sound goes to the soundbar instead of the TV speakers.
Connecting with HDMI ARC (The Recommended Method)
Start by finding the HDMI ARC port on your TV. Check your TV's manual or look at the ports on the back—the ARC port is usually HDMI 3 or HDMI 4, and it's often labeled. If you're not sure which one it is, check your TV manufacturer's website by searching "[your TV model] HDMI ARC port."
Take an HDMI cable and plug one end into the HDMI ARC port on your TV. Plug the other end into the HDMI ARC port on the back of your Bose soundbar. If your soundbar doesn't have an HDMI port, it doesn't support HDMI ARC—skip to the optical cable section instead.
Once the cable is connected, turn on your TV and soundbar. Go into your TV's settings menu and look for audio or sound settings. You should see an option for "HDMI ARC" or "Digital Audio Out." Turn this on. The exact menu path varies by TV brand—Samsung calls it "Sound Output," LG calls it "Audio Format," and so on—but the setting exists on all modern TVs.
Test the connection by playing something on your TV. You should hear sound from the soundbar, not from the TV speakers. If you hear sound from both, go back into your TV's audio settings and disable the TV speakers or set the audio output to HDMI only. Your TV remote should now control the soundbar volume.
Connecting with an Optical Cable (For Older TVs)
If your TV doesn't have HDMI ARC, an optical cable is the next best option. Look for a small square port on the back of your TV labeled "Optical," "TOSLINK," or "Digital Audio Out." Bose soundbars that support optical have a matching port on the back.
Plug one end of an optical cable into your TV's optical port and the other end into the soundbar's optical port. The cable has a small plastic clip on each end—push it in until you hear a click. Turn on both devices and test the sound.
Unlike HDMI ARC, your TV remote won't control the soundbar volume when using optical. You'll adjust volume using the soundbar's remote or the buttons on the soundbar itself. If you don't hear sound, go into your TV's audio settings and make sure the optical output is turned on and set as the default audio output.
Connecting via Bluetooth Wireless
Bluetooth is the simplest connection to set up but the least reliable for a permanent TV setup, because walls, furniture, and other devices can interrupt the signal. Use Bluetooth only if your TV doesn't have HDMI ARC or optical, or if you want to move the soundbar between rooms.
Put your Bose soundbar in pairing mode. On most Bose models, hold the Bluetooth button on the back or remote for a few seconds until you hear a tone or see a light blink. Check your soundbar's manual if you're not sure which button to press.
On your TV, go to Settings and look for Bluetooth or Wireless Devices. Select your Bose soundbar from the list of available devices. Once it connects, test the sound. Your TV remote won't control the soundbar volume over Bluetooth—you'll use the soundbar remote instead.
Troubleshooting When You Don't Hear Sound
If you've connected the cable but hear nothing, the most common cause is that your TV is still sending sound to its own speakers instead of the soundbar. Go back into your TV's audio settings and look for an option called "Audio Output," "Sound Output," or "Speaker Settings." Change it from "TV Speaker" or "Internal Speaker" to "External Speaker," "HDMI," or "Optical"—the exact wording depends on your TV brand.
If you're using HDMI ARC and still have no sound, make sure HDMI ARC is actually enabled in your TV's settings. Some TVs have it turned off by default. Also check that you plugged the cable into the correct HDMI port—not all HDMI ports support ARC, only one or two specific ones.
For optical connections, make sure the plastic clip on the cable is fully seated in both ports. A loose connection will cut off sound completely. If the soundbar has a power button, try turning it off and back on.
If you're using Bluetooth and the connection keeps dropping, move the soundbar closer to the TV and away from other wireless devices like routers or cordless phones. Bluetooth works best within 30 feet with a clear line of sight.
Adjusting Volume and Audio Settings After Connection
Once sound is coming through the soundbar, you may want to adjust how it handles different audio sources. If you have cable or satellite connected to your TV, that audio will automatically go to the soundbar once you've set the TV's audio output correctly. Streaming apps like Netflix and Disney+ will also use the soundbar.
If your soundbar has a subwoofer, it usually connects wirelessly and pairs automatically when you first turn on the soundbar. You shouldn't need to do anything extra. If the subwoofer doesn't connect, check your soundbar's manual for pairing instructions.
Most Bose soundbars have their own remote, but you can also control volume with your TV remote if you're using HDMI ARC. If your TV remote doesn't control the soundbar, go into your TV's settings and look for "HDMI Device Control," "CEC," or "Anynet+" (Samsung's name for this feature). Turning this on lets your TV remote talk to the soundbar.
When to Call for Help
If you've tried all three connection methods and still have no sound, or if the soundbar powers on but produces only crackling or distorted audio, the soundbar itself may have a hardware problem. Contact Bose support with your soundbar model number—you can find it on the back of the unit or in the manual.
If your TV doesn't have any of these ports (HDMI ARC, optical, or Bluetooth), it's an older model that may not support modern soundbars. In that case, you may need an adapter or a different soundbar model designed for older TVs. Bose's website lists which models work with which TV types.
Frequently Asked Questions
Do I need a special HDMI cable for ARC?
No. Any standard HDMI cable works for ARC. You don't need to buy an expensive "ARC cable"—a regular HDMI cable is the same thing. Make sure it's plugged into the ARC port on your TV, not just any HDMI port.
Can I use HDMI ARC and optical at the same time?
You can plug both cables in, but your TV will only send sound through one of them. Choose one method and disable the other in your TV's audio settings. Using both at once can cause confusion or audio delays.
Why does my soundbar keep disconnecting from Bluetooth?
Bluetooth has a limited range and can be blocked by walls or metal objects. Move the soundbar closer to your TV and make sure nothing is between them. If disconnections keep happening, switch to HDMI ARC or optical instead—they're more stable for a TV that stays in one place.
Will my soundbar work if I connect it to my cable box instead of my TV?
Yes, but only if your cable box has HDMI ARC, optical, or Bluetooth. Many cable boxes have optical ports. If you connect to the cable box, make sure your TV is set to pass audio through to the soundbar, or audio from other TV apps won't reach the soundbar.
Can I control the soundbar volume with my TV remote?
Only if you're using HDMI ARC and your TV has HDMI Device Control (called CEC, Anynet+, or similar depending on the brand) turned on. Optical and Bluetooth connections require the soundbar remote for volume control.