The fastest way: HDMI ARC or eARC

Most LG soundbars connect to your TV through a single HDMI cable using HDMI ARC (Audio Return Channel) or the newer eARC standard. This is the simplest route because one cable carries both picture and sound, and your TV remote can control the soundbar's volume.

Plug an HDMI cable into the HDMI ARC or eARC port on your LG soundbar — the manual or the back panel will label it. Plug the other end into the HDMI ARC or eARC port on your TV. Not all HDMI ports on your TV support this; check your TV's manual or look for the label on the port itself. Once connected, go into your TV's audio settings and turn on HDMI ARC or eARC. Your soundbar should power on automatically when the TV turns on.

Key Takeaways

  • HDMI ARC or eARC is the easiest method because one cable handles both video and audio, and your TV remote controls the volume.
  • Your TV must have an HDMI ARC or eARC port — usually HDMI 3 or 4 — and you must enable it in the TV's audio settings.
  • If your TV lacks HDMI ARC, use an optical cable instead, which carries sound only but works with almost any TV made in the last 15 years.
  • Bluetooth is the slowest option and works best for streaming music from your phone, not for watching TV.
  • After connecting, test the sound by playing content on your TV; if nothing comes out of the soundbar, check that the input source is set correctly in the soundbar's menu.

Using an optical cable if your TV has no HDMI ARC

If your TV does not have an HDMI ARC port, or if HDMI ARC is not working, use an optical cable instead. This cable carries audio only, so you will still need to connect your TV to a video source separately — but optical works with nearly every TV made in the last 15 years.

Plug the optical cable into the optical audio output on your TV (often labeled "Optical Out" or "SPDIF"). Plug the other end into the optical input on the back of your LG soundbar. Then go into your TV's audio settings and set the audio output to "Optical" or "Digital Audio Out." The soundbar will receive sound from your TV, but your TV remote will not control its volume — you will use the soundbar's remote or buttons instead.

Connecting via Bluetooth for phone or tablet audio

Bluetooth works well for streaming music from your phone or tablet to the soundbar, but it is not ideal for TV because there is a slight delay between the picture and the sound. If you want to use Bluetooth anyway, press the Bluetooth button on your LG soundbar or hold it for three seconds until the light blinks.

On your phone or tablet, open Bluetooth settings and look for your soundbar's model number in the list of available devices. Tap it to pair. Once paired, audio from your phone will play through the soundbar. To switch back to TV audio, you will need to manually switch the soundbar's input back to HDMI or Optical using its remote or buttons.

Checking and changing the soundbar's input source

If you have connected the cable correctly but hear no sound from the soundbar, the input source may be set to the wrong option. On your LG soundbar's remote, look for a button labeled "Input" or "Source." Press it and cycle through the options — usually HDMI, Optical, Bluetooth, and Aux — until you land on the one you just plugged in.

Some LG soundbars also have a small button on the back or side of the unit itself that cycles through inputs. Check your manual for the exact location. Once you select the correct input, play something on your TV — a streaming app, a cable box, or a disc player — and you should hear sound from the soundbar.

Enabling HDMI CEC so your TV remote controls the soundbar

If you used HDMI ARC or eARC, your TV remote can control the soundbar's volume if you turn on HDMI CEC (Consumer Electronics Control). This feature lets devices on the same HDMI network talk to each other. On your TV, go to Settings, then look for "HDMI CEC," "Anynet+," "Bravia Sync," or a similar name depending on your TV brand.

Turn it on, then test by pressing the volume buttons on your TV remote while the soundbar is playing. If the volume changes on the soundbar, CEC is working. If not, go back into your TV's settings and make sure HDMI CEC is fully enabled, and check that the soundbar's manual does not list any special steps to set up CEC on that model.

Troubleshooting when sound does not come through

If you have connected the cable and selected the right input but still hear nothing, first check that the soundbar is powered on — look for a light on the front panel. If it is off, press the power button on the remote or the unit itself.

Next, make sure your TV is actually sending audio to the soundbar. On your TV, go to Settings or Audio Settings and confirm that the audio output is set to "External Speaker," "Optical," "HDMI," or whatever label your TV uses for connected audio devices — not "TV Speaker" or "Internal Speaker." If you see a mute icon next to the soundbar input, unmute it. If the soundbar still produces no sound after these steps, try unplugging it for 30 seconds, then plugging it back in to reset it.

Connecting a second device like a cable box or gaming console

Your soundbar receives audio from your TV, not directly from other devices. So if you want to hear sound from a cable box, gaming console, or streaming device, connect that device to your TV first, then the TV sends the audio to the soundbar through HDMI ARC, eARC, or Optical.

The only exception is if your LG soundbar has multiple HDMI inputs on the back. Some higher-end models do — in that case, you can plug a device directly into the soundbar's HDMI input, and the soundbar will pass the video signal through to your TV while keeping the audio. Check your soundbar's manual to see if it has this feature; most entry-level and mid-range models do not.

Frequently Asked Questions

Do I need a special HDMI cable for ARC?

No. Any standard HDMI cable works with ARC or eARC. The difference is in the ports and the TV settings, not the cable itself. If you already have an HDMI cable at home, try it first before buying a new one.

Can I use both HDMI and optical at the same time?

You can plug both cables in, but the soundbar will only play audio from one input at a time. Use the Input button on the remote to switch between them. Most people choose one and stick with it.

Why is there a delay between the TV picture and the soundbar sound?

This usually happens with Bluetooth or when optical audio is not set up correctly. HDMI ARC and eARC have almost no delay. If you are using optical and notice lag, check that your TV's audio output is set to "Optical" and not a different format like "PCM" or "Dolby Digital."

Will the soundbar turn on automatically when I turn on my TV?

Yes, if you use HDMI ARC or eARC and both devices are plugged into power. The soundbar will wake up when it detects an HDMI signal from the TV. With optical, the soundbar may not turn on automatically — you may need to press its power button or use the remote.

What if my TV does not have HDMI ARC or optical audio out?

This is rare on modern TVs, but if yours lacks both, Bluetooth is your only option. Keep in mind that Bluetooth has a slight audio delay, so it works better for music than for TV shows or movies where the sound needs to match the picture exactly.