The fastest way: HDMI with ARC or eARC

Most soundbars connect to your TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This is the simplest method because one cable carries both picture and sound, and your TV remote often controls the soundbar's volume automatically. If your TV has an eARC port (the newer standard), use that — it handles higher-quality sound formats.

Plug the HDMI cable into the ARC or eARC port on your TV, then plug the other end into the HDMI output on your soundbar. Turn on both devices. Go into your TV's settings menu, find the audio or sound output section, and select HDMI as the output. Your TV will now send all sound through the soundbar instead of its built-in speakers. Test it by turning up the volume on your remote — if the soundbar responds, you are done.

If your TV does not have an ARC port, or if you own an older soundbar without HDMI, skip to the optical cable section below.

Key Takeaways

  • HDMI ARC or eARC is the simplest connection — one cable carries both picture and sound, and your TV remote controls volume.
  • Optical cable (also called TOSLINK) works on older TVs and soundbars that lack HDMI, though it does not support the newest sound formats.
  • Bluetooth is wireless but works best for streaming from your phone or tablet, not for TV sound, because it adds a slight delay.
  • After connecting any cable, go into your TV's audio settings and select the soundbar as the output device so sound actually plays through it.
  • If sound still does not play, check that the soundbar is powered on and set to the correct input, and that your TV is not muted.

Using an optical cable if your TV has no HDMI ARC

An optical cable (also called TOSLINK) is a thin, square connector that carries digital sound. Many older TVs and soundbars use this instead of HDMI. Look on the back of your TV for a port labeled "Optical Out" or "TOSLINK" — it is usually a small square opening with a red or black plastic cap. Plug one end of the optical cable into that port and the other end into the optical input on your soundbar.

Turn on both devices and go into your TV's audio settings. Select optical or TOSLINK as the sound output. The soundbar should now play all TV sound. Optical cables work reliably but do not support newer surround sound formats like Dolby Atmos, so if you want the best sound quality, HDMI ARC is still the better choice if your TV has it.

Connecting via Bluetooth for wireless sound

Bluetooth is wireless and convenient, but it introduces a slight delay between the picture on your screen and the sound from the speaker — usually a fraction of a second, but enough to notice during dialogue or action scenes. For this reason, Bluetooth works better for streaming music from your phone than for TV sound. If you want to try it anyway, put your soundbar in pairing mode (check your manual for the button or menu option) and then go to your TV's Bluetooth settings to find and pair the soundbar.

Once paired, select the soundbar as your audio output in your TV's sound settings. Test it with a show or movie to see if the delay bothers you. If it does, switch back to a wired connection.

Troubleshooting when sound does not come through

If you have plugged in the cable but hear nothing, first check that the soundbar is powered on — look for a light on the front panel. Then check that the soundbar is set to the correct input. Most soundbars have an input button on the remote or the back panel; cycle through the inputs until you see the one you plugged the cable into (HDMI, Optical, or Bluetooth).

Next, go back into your TV's audio settings and confirm that the soundbar is selected as the output device, not the TV's built-in speakers. Also check that your TV is not muted — press the mute button on your remote to toggle it off. If you are using HDMI ARC, make sure you plugged the cable into the ARC or eARC port specifically, not a regular HDMI port, because regular HDMI ports do not carry sound back to the soundbar.

If you still hear nothing, try unplugging the soundbar for 30 seconds, then plugging it back in. This resets the connection and often fixes temporary glitches. If the soundbar has a reset button (usually a small hole on the back), hold it for 10 seconds with a paperclip to perform a full reset.

Adjusting volume and audio settings after connection

Once your soundbar is connected and playing sound, you can adjust the volume using your TV remote if you are using HDMI ARC — the TV sends volume commands directly to the soundbar. If you are using optical or Bluetooth, you may need to use the soundbar's remote to change volume, depending on your TV model.

Check your TV's audio settings for options like "Dolby Digital" or "PCM" — these are sound formats. Leave them on their default setting unless you have a specific reason to change them. Some soundbars have their own app (check the manufacturer's website) that lets you adjust bass, treble, and surround sound settings from your phone, which is useful if you want to fine-tune the sound for movies versus music.

When to use a soundbar remote versus your TV remote

If your soundbar is connected via HDMI ARC, your TV remote should control both the TV and the soundbar — you only need one remote. If the soundbar remote is not responding to your TV remote, go into your TV's settings and look for an option called "HDMI CEC" or "Anynet+" (the name varies by brand). Turn this on, and your TV remote will take control.

If you are using optical or Bluetooth, you will likely need the soundbar's remote to adjust volume and input, because those connections do not send remote signals back to the soundbar. Keep both remotes handy, or consider buying a universal remote that can control both devices.

Frequently Asked Questions

Do I need a special HDMI cable for ARC?

No. Any standard HDMI cable works with ARC or eARC. You do not need to buy an expensive "ARC cable" — the difference is in the port on your TV and soundbar, not the cable itself. A cable you already own will work fine.

Can I use both the soundbar and my TV speakers at the same time?

Most TVs let you choose one output or the other, not both. If you want sound from both, check your TV's audio settings for an option like "Dual Audio" or "Multi-Output" — not all models have this. Otherwise, you will need to switch between the soundbar and TV speakers manually.

What if my soundbar has no HDMI port?

Older soundbars use optical cable or Bluetooth only. Optical cable is the most reliable wired option for these models. Plug the optical cable from your TV into the soundbar's optical input, then select optical as your TV's audio output.

Why is there a delay between the picture and sound with Bluetooth?

Bluetooth has built-in latency — a tiny processing delay — that wired connections do not have. For TV watching, HDMI ARC or optical cable is always better because they send sound and picture at the same time. Bluetooth is fine for music streaming from your phone.

Can I connect my soundbar to multiple devices at once?

Most soundbars can remember multiple devices (your TV, phone, tablet) but only play from one at a time. When you want to switch from TV to your phone, you manually select the new device on the soundbar or in its app. Some soundbars auto-switch when they detect a Bluetooth signal from your phone, but check your manual to see if yours does this.