The fastest way: HDMI eARC or optical cable

Most Samsung soundbars connect to Samsung TVs through one of two cables: HDMI eARC (the newer, simpler method) or a digital optical cable (the older, more reliable fallback). HDMI eARC lets your TV send sound to the soundbar through the same cable that carries picture, and it works on most Samsung TVs made after 2016 and most Samsung soundbars made after 2017. If your TV or soundbar is older, or if HDMI eARC causes problems, the optical cable is your backup — it's a thin cable with a square connector that carries only sound.

Before you plug anything in, check the back of your TV and soundbar for the ports. On Samsung TVs, the HDMI eARC port is usually labeled "HDMI 3" or "HDMI 4" and often has a small label that says "eARC" or "ARC". On Samsung soundbars, it's the HDMI port on the back (not the front). If you're using optical instead, look for a small square port labeled "Digital Audio Out" or "Optical Out" on the TV, and "Optical In" on the soundbar.

Key Takeaways

  • HDMI eARC is the simplest connection method if your TV and soundbar both support it — plug one cable into the eARC port on each device and turn on eARC in your TV settings.
  • A digital optical cable is the reliable backup if HDMI eARC doesn't work or if your devices are older.
  • After connecting the cable, you must tell your TV to send sound to the soundbar through the sound output settings, not just plug it in and expect it to work.
  • Bluetooth is an option for some Samsung soundbars but uses more power and can drop the connection, so cable connection is preferred.
  • If sound still doesn't come through after connecting and changing settings, restart both devices and check that the soundbar is set to the correct input.

Setting up HDMI eARC step by step

Plug the HDMI cable into the eARC port on the back of your TV (usually HDMI 3 or 4) and into the HDMI port on the back of your soundbar. Turn on both devices. On your TV remote, go to Settings, then Sound, then Sound Output. Look for an option called "HDMI eARC" or "External Speaker" and select it. Your TV should now send all sound to the soundbar instead of its own speakers.

If the soundbar doesn't produce sound after you've changed the setting, go back to Settings > Sound and look for a toggle called "eARC" or "HDMI Audio Format". Turn it on if it's off. Some Samsung TVs also have a setting called "Dolby Atmos" or "DTS" under Sound > Additional Settings — these are optional, but turning them on can improve sound quality if your soundbar supports them. If you still hear nothing, restart both the TV and soundbar by unplugging them for 30 seconds, then plug them back in.

Using a digital optical cable instead

If HDMI eARC doesn't work or your devices don't support it, a digital optical cable is the next choice. Plug one end into the "Digital Audio Out" or "Optical Out" port on the back of your TV, and the other end into the "Optical In" port on the back of your soundbar. Turn on both devices.

On your TV remote, go to Settings, then Sound, then Sound Output. Select "Optical" or "External Speaker" from the list. The soundbar should now receive sound from the TV. If it doesn't, check that the soundbar is set to "Optical" as its input — most soundbars have a button on the remote or on the back labeled "Input" or "Source" that cycles through HDMI, Optical, Bluetooth, and other options. Press it until the display shows "Optical" or "D.In" (short for Digital In).

Connecting by Bluetooth if you don't have cables

Some Samsung soundbars can pair with your TV over Bluetooth, though this method uses more battery power on wireless remotes and can occasionally drop the connection. On your soundbar remote, press the button labeled "Source" or "Input" until the display shows "Bluetooth" or "BT". On your TV remote, go to Settings, then Sound, then Bluetooth Speaker List. Your soundbar should appear in the list — select it to pair.

Once paired, your TV will send sound to the soundbar over Bluetooth whenever both devices are on and in range. If the connection drops, go back to the Bluetooth Speaker List and select the soundbar again. Bluetooth works best when the soundbar is within 10 feet of the TV and there are no large metal objects between them.

Checking that your soundbar is the active speaker

After you've connected the cable and changed your TV's sound output setting, the soundbar should be the active speaker — meaning your TV sends all sound to it, not to the TV's built-in speakers. To confirm this, turn up the volume on your TV remote and listen to see if sound comes from the soundbar, not the TV itself. If sound still comes from the TV, go back to Settings > Sound > Sound Output and make sure you've selected the soundbar or external speaker option, not "TV Speaker".

Some Samsung TVs have a setting that automatically switches back to the TV speaker if the soundbar is turned off or disconnected. If this happens to you, go to Settings > Sound > Additional Settings and look for "Auto Power Link" or "Auto Volume Leveling". Turn off "Auto Power Link" if it's on — this will prevent your TV from switching back to its own speakers when the soundbar powers down.

Troubleshooting when sound doesn't come through

If you've connected the cable and changed the sound output setting but still hear nothing from the soundbar, start by restarting both devices. Unplug the TV and soundbar from the wall, wait 30 seconds, and plug them back in. This clears temporary glitches that prevent communication between the devices.

Next, check that the soundbar is set to the correct input. On the soundbar remote, press "Source" or "Input" and cycle through the options until you see the input you're using (HDMI, Optical, or Bluetooth) highlighted or lit up. If you're using HDMI eARC, the soundbar display should show "HDMI" or "eARC". If you're using optical, it should show "Optical" or "D.In". If the soundbar is on the wrong input, it won't receive sound even if the cable is plugged in correctly.

If the soundbar still doesn't work, try the optical cable instead of HDMI eARC, or vice versa. Sometimes one connection method works better than the other depending on your specific TV and soundbar model. You can also check your soundbar's manual or Samsung's support website for your exact model number — the manual will list which connection methods your soundbar supports and any specific steps for your TV model.

Frequently Asked Questions

Do I need a special HDMI cable for eARC?

No. Any standard HDMI cable works for eARC — you don't need to buy a cable labeled "eARC" or "High Speed". The eARC feature is built into the ports on your TV and soundbar, not the cable itself. If you already have an HDMI cable at home, it will work.

Can I use both the soundbar and the TV speakers at the same time?

Most Samsung TVs don't allow this — when you select the soundbar as the sound output, the TV speakers turn off. If you want sound from both, you would need to manually switch the sound output back to "TV Speaker" each time, which defeats the purpose of having a soundbar. The soundbar is meant to replace the TV speakers entirely.

Why does my soundbar keep disconnecting from the TV?

If you're using Bluetooth, the connection can drop if the soundbar moves out of range or if there's interference from other wireless devices. Switch to a wired connection (HDMI eARC or optical) instead — these are more stable and don't depend on wireless range. If you're already using a cable and the connection keeps dropping, try restarting both devices and checking that the cable is fully plugged in on both ends.

What if my TV doesn't have an eARC port?

Older Samsung TVs (before 2016) don't have eARC. Use a digital optical cable instead — almost all Samsung TVs have an optical port on the back. Optical is just as reliable as eARC, though it only carries sound, not picture. You'll need to buy an optical cable if you don't have one, but they cost less than $10.

Do I need to turn on the soundbar every time I watch TV?

Most Samsung soundbars have an "Auto Power Link" feature that turns them on automatically when the TV turns on. Check your soundbar's settings to make sure this is enabled. If it's off, you'll need to turn on the soundbar manually each time, or use your soundbar remote to power it on.