The three ways to connect a Samsung soundbar
Most Samsung soundbars connect to your TV using one of three methods: HDMI, optical cable, or Bluetooth. HDMI is the fastest and carries both picture and sound through one cable. Optical cable (also called Toslink) sends sound only and works with older TVs. Bluetooth is wireless but can drop the connection if something blocks the signal between the soundbar and TV.
The method you choose depends on what ports your TV has and how far away the soundbar sits from the TV. If your TV has an HDMI port labeled ARC or eARC, start there — that's the easiest route. If your TV is older or those ports are full, optical cable is your next best option. Bluetooth works as a backup if neither of those is practical.
Key Takeaways
- HDMI ARC or eARC is the fastest connection and lets your TV send sound to the soundbar automatically without extra setup.
- Optical cable works with any TV that has an optical port and doesn't require HDMI ports to be free.
- Bluetooth connects wirelessly but can lose signal if the soundbar is too far from the TV or something blocks the path between them.
- You'll need to switch your TV's audio output to the soundbar in the TV's sound settings after you plug in the cable or pair via Bluetooth.
Connecting with HDMI ARC or eARC
HDMI ARC (Audio Return Channel) and eARC (enhanced Audio Return Channel) let your TV send sound back through the HDMI cable to the soundbar. This is the simplest method because one cable handles both picture and sound, and your TV controls the volume through its remote.
First, locate the HDMI port on your TV labeled ARC or eARC — it's usually HDMI 3 or HDMI 4, but check your TV's manual if you're not sure. Plug one end of an HDMI cable into that port and the other end into the HDMI port on the back of your Samsung soundbar. Then turn on both devices and go to your TV's settings menu. Look for Sound or Audio Output, select it, and choose the soundbar from the list. Your TV remote should now control the soundbar's volume.
If the soundbar doesn't appear in the audio output menu, unplug both devices for 30 seconds, plug them back in, and wait two minutes for them to recognize each other. Some Samsung soundbars also have a button on the back or remote labeled HDMI or D.IN — press it to make sure the soundbar is set to receive HDMI input.
Connecting with an optical cable
An optical cable (Toslink) is a thin cord with a square connector on each end. It carries sound only, not picture, but it's reliable and works with almost any TV made in the last 15 years. You'll find the optical port on your TV labeled Optical Out, Toslink, or Audio Out — it's usually a small square hole on the back or side.
Plug one end of the optical cable into your TV's optical port and the other into the optical port on the back of your soundbar. Turn on both devices and go to your TV's sound settings. Select Sound Output or Audio Output and choose Optical or the soundbar's name from the list. On the soundbar itself, press the input button (usually labeled Input, Source, or D.IN) until the display shows Optical or Toslink.
Optical cables are inexpensive — most cost between $5 and $15 — and you can buy them at any electronics store or online. Unlike HDMI, optical cables don't carry video, so you'll still need to plug your TV into power and any other devices (like a cable box or streaming device) separately.
Connecting via Bluetooth
Bluetooth is wireless and works if your TV and soundbar are in the same room and within 30 feet of each other. The connection can be interrupted by walls, metal objects, or other wireless devices like routers or cordless phones, so it's best used when the soundbar is close to the TV.
First, make sure Bluetooth is turned on on both your TV and soundbar. On most Samsung soundbars, hold the Bluetooth button on the remote or the soundbar itself for three seconds until you see a blue light or hear a tone. Then go to your TV's Bluetooth settings (usually under Sound or Connections in the settings menu) and look for your soundbar's model number in the list of available devices. Select it to pair them.
Once paired, your TV should automatically send sound to the soundbar when you turn both on. If the connection drops, unpair the devices (remove them from each other's Bluetooth list) and pair them again. Bluetooth pairing usually takes less than a minute, but it's less stable than a wired connection, so use it only if HDMI or optical isn't an option.
Switching your TV's audio output to the soundbar
After you plug in the cable or pair via Bluetooth, your TV won't automatically send sound to the soundbar — you have to tell it to. Go to your TV's main settings menu (usually accessed by pressing the settings or menu button on your TV remote) and look for Sound, Audio, or Speaker Settings.
Inside that menu, find Sound Output, Audio Output, or Speaker Selection. You should see a list that includes your TV's built-in speakers and the soundbar. Select the soundbar. Some TVs also have an option called TV Speaker or Internal Speaker — make sure that's turned off so sound doesn't come from both the TV and the soundbar at the same time.
Test the connection by turning up the volume on your TV remote. If you hear sound from the soundbar and the volume changes, the connection is working. If you don't hear anything, go back to the audio output menu and double-check that the soundbar is selected.
Troubleshooting common connection problems
If the soundbar isn't showing up in your TV's audio output menu, the devices may not be recognizing each other. Unplug both the TV and soundbar from power, wait 30 seconds, and plug them back in. Wait two minutes for them to boot up fully before checking the audio menu again. If you're using HDMI, try a different HDMI cable — some older or damaged cables don't support ARC or eARC.
If you're using an optical cable and there's no sound, make sure the cable is pushed all the way into both ports — optical connections need to be fully seated to work. Also check that your TV's audio output is set to Optical and not TV Speaker or HDMI. On the soundbar, press the input button to confirm it's set to receive optical input.
If you're using Bluetooth and the connection keeps dropping, move the soundbar closer to the TV and away from other wireless devices like routers or microwaves. Bluetooth operates on the same frequency as many household devices, and interference can cause dropouts. If the problem persists, unpair the devices, restart both, and pair them again.
If sound is coming from both the TV speakers and the soundbar, go back to your TV's audio settings and turn off the internal speakers. Most TVs have an option to disable the built-in speakers once an external speaker is connected.
When to call for help
If you've tried all three connection methods and none of them work, the soundbar or TV may have a hardware problem. Check that the ports themselves aren't damaged — look inside the HDMI, optical, or Bluetooth receiver for bent pins, cracks, or debris. If a port looks damaged, the device may need repair or replacement.
If the ports look fine but the soundbar still won't connect, contact Samsung support through their website or call their customer service line. Have your soundbar's model number (usually on the back or in the manual) ready when you call. If your TV is made by a different manufacturer, contact that manufacturer's support instead — they can tell you whether your TV's audio output is working correctly.
Frequently Asked Questions
Do I need a special HDMI cable for ARC or eARC?
No — any HDMI cable works with ARC, but eARC works better with newer cables labeled "High Speed" or "Premium High Speed." If you have an older HDMI cable lying around, try it first. If it doesn't work, buy a new one; they cost $10 to $20.
Can I use more than one connection method at the same time?
You can plug in multiple cables, but your TV will only send sound through one at a time. Pick the one that works best and leave the others plugged in as backups. If one connection fails, you can switch to another without unplugging cables.
Why does my soundbar volume not change when I use the TV remote?
Your TV remote only controls the soundbar's volume if you're using HDMI ARC or eARC. With optical or Bluetooth, you'll need to use the soundbar's remote or buttons to adjust volume. Some newer Samsung soundbars can learn your TV remote, but that requires extra setup in the soundbar's settings.
What if my TV doesn't have HDMI ARC or an optical port?
Bluetooth is your only option, but it's less stable than wired connections. If your TV is very old and doesn't have any of these ports, you may need an adapter — ask the soundbar manufacturer whether they sell one that works with your TV model.
Can I connect the soundbar to my cable box or streaming device instead of the TV?
Yes, if your cable box or streaming device has HDMI ARC or optical output. Plug the soundbar into the device instead of the TV, and set that device's audio output to the soundbar. This works well if you want the soundbar to handle sound from multiple sources.