The fastest way: HDMI ARC or eARC
Most Insignia TVs made in the last five years have an HDMI port marked ARC or eARC. This is the simplest connection because one cable carries both audio and video, and your TV remote will control the soundbar volume. Look at the back or side of your TV for HDMI ports — one will have a small label or marking. If your soundbar has an HDMI input (not all do), plug the HDMI cable from that port into the matching HDMI port on your soundbar, then plug the other end into the ARC port on your TV.
Once connected, go into your Insignia TV settings. Press the menu button on your remote, find audio or sound settings, and look for an option called HDMI ARC, eARC, or digital audio output. Turn it on. Your TV will now send sound through the HDMI cable instead of its built-in speakers. The soundbar should power on automatically when you turn on the TV.
If your TV has no ARC port, or your soundbar has no HDMI input, move to the optical connection method below.
Key Takeaways
- HDMI ARC is the easiest method if both your TV and soundbar support it — one cable handles audio and video, and your TV remote controls volume.
- Optical cables work on almost all soundbars and Insignia TVs, even older models, and require only that you enable digital audio output in TV settings.
- RCA cables are a last resort if your soundbar has no HDMI or optical input, and they carry lower-quality audio than the other two methods.
- After any connection, disable your TV's built-in speakers in the audio settings so sound comes only from the soundbar.
Optical cable: the reliable backup
If HDMI ARC is not an option, an optical cable (also called TOSLINK or S/PDIF) works on nearly every soundbar and Insignia TV. Look for a small square port on the back of your TV labeled optical, TOSLINK, or digital audio out. Plug one end of the optical cable into that port and the other end into the optical input on your soundbar.
Go to your TV's menu, find audio or sound settings, and look for digital audio output or optical output. Make sure it is turned on. Some Insignia TVs have a setting called "audio format" — set it to PCM or auto if you see it. Your soundbar should receive sound through the optical cable within a few seconds.
Optical cables are more durable than RCA cables and carry better sound quality than analog connections. They are also cheap — a quality optical cable costs between $8 and $15.
RCA cables: when nothing else fits
If your soundbar has only RCA inputs (the red and white ports), you will need an RCA cable and your TV must have RCA audio outputs on the back. Plug the red connector into the red port and the white connector into the white port on both the TV and soundbar.
RCA connections carry analog audio, which means lower sound quality than HDMI or optical. Use this method only if your soundbar has no HDMI or optical input. After connecting, go to your TV settings and make sure audio output is set to analog or RCA.
Turning off your TV's built-in speakers
Once your soundbar is connected and receiving sound, disable the TV's internal speakers so all audio comes through the soundbar. Press menu on your remote, go to audio or sound settings, and look for an option called speaker output, internal speakers, or TV speakers. Set it to off or external speakers.
Some Insignia TVs have a setting called audio out that lets you choose between TV speakers and external audio. Select external audio. If you cannot find this setting, your TV may automatically mute the built-in speakers when it detects an external audio device — test by playing something and listening to where the sound comes from.
Troubleshooting: no sound from the soundbar
If you connected everything but hear nothing, first check that the soundbar is powered on — look for a light on the front panel. If it is on but silent, go back to your TV settings and verify that digital audio output or HDMI ARC is actually enabled. Sometimes the setting defaults to off even after you turn it on; go back and check again.
If the soundbar still has no sound, try unplugging it for 30 seconds, then plugging it back in. This resets the connection. If you are using an optical cable, make sure the cable is pushed all the way into both ports — optical connections are straightforward to insert halfway without making contact.
For HDMI ARC, try a different HDMI cable. Some cables are sold as HDMI but do not support ARC; a cable labeled HDMI 2.1 or high-speed HDMI will work. If you have tried a different cable and still have no sound, your TV or soundbar may not support ARC — fall back to optical or RCA.
Controlling soundbar volume with your TV remote
If you used HDMI ARC, your Insignia TV remote should control the soundbar volume automatically. Press the volume up or down button and watch the soundbar — if it responds, you are set. If it does not, go to your TV settings and look for HDMI control, CEC, or Anynet+ (Samsung's name for the same feature). Turn it on.
If you used optical or RCA, your TV remote will not control the soundbar. You will need to use the soundbar's remote or a control app if the soundbar has one. Some soundbars let you set a fixed volume so you adjust sound only through the TV remote by controlling the TV's output level — check your soundbar manual for this option.
Wireless connection: Bluetooth as a backup
Most modern soundbars support Bluetooth, which lets you send audio from your TV without any cable. This is useful if you cannot reach the TV with a cable or if the wired ports are damaged. Press the Bluetooth button on your soundbar remote or look for a Bluetooth symbol on the soundbar itself and hold it for three seconds until you see a light blink.
On your Insignia TV, go to settings, find Bluetooth or wireless audio, and look for your soundbar in the list of available devices. Select it and confirm the pairing. Bluetooth audio has a slight delay compared to wired connections, so it works better for casual listening than for gaming or watching movies where sound and picture need to match exactly.
Frequently Asked Questions
Do I need a special HDMI cable for ARC?
Any HDMI cable will physically fit, but older cables may not support ARC. If your soundbar has no sound over HDMI, try a cable labeled HDMI 2.1 or high-speed HDMI. Most cables sold in the last three years support ARC.
Can I use both the soundbar and TV speakers at the same time?
Yes, but it sounds worse because audio plays from two sources with a slight delay between them. Go to your TV audio settings and turn off the internal speakers so sound comes only from the soundbar.
What if my Insignia TV has no audio output ports?
Older Insignia TVs sometimes have no optical or RCA outputs. In that case, HDMI ARC is your only wired option. If your TV has no ARC port either, Bluetooth is the only way to connect a soundbar.
Why is there a delay between the picture and soundbar audio?
This usually happens with optical or Bluetooth connections. Go to your soundbar settings and look for audio delay, lip sync, or sync adjustment. You can add a delay to the audio to match the video, or reduce it if audio is ahead of the picture.
Will the soundbar turn on automatically with my TV?
With HDMI ARC, yes — the TV sends a signal that wakes the soundbar. With optical or RCA, the soundbar stays in standby and you must turn it on manually or set it to power on when it detects audio.