The fastest way: HDMI with eARC
Most Samsung smart TVs and modern soundbars connect through a single HDMI cable using a feature called eARC (enhanced Audio Return Channel). This is the simplest route because one cable carries both picture and sound, and the TV sends audio to the soundbar automatically once you plug it in.
Find the HDMI port on your TV labeled eARC or ARC — it is usually HDMI 3 or HDMI 4, and Samsung includes a label on the back panel. Plug one end of an HDMI cable into that port and the other end into the eARC port on your soundbar. Then turn on both devices. Your TV should recognize the soundbar within a few seconds, and you will hear sound from the bar instead of the TV speakers.
If you do not hear anything, go to your TV's Settings menu, select Sound, and look for Speaker Settings or Sound Output. Choose the soundbar from the list. Some TVs call this option "External Speaker" or "Audio Out Device." Once you select it, the connection is complete.
Key Takeaways
- HDMI eARC is the simplest connection method and requires only one cable between your TV and soundbar.
- The eARC port is usually labeled on your Samsung TV's back panel and is typically HDMI 3 or HDMI 4.
- After plugging in the cable, go to your TV's Sound settings and select the soundbar as your audio output device.
- If eARC is not available on your TV or soundbar, optical audio or Bluetooth are reliable alternatives.
- Wireless connections like Bluetooth work without cables but may have slight audio delay in some cases.
Using optical audio if your soundbar does not have eARC
If your soundbar does not have an eARC port, or if your TV does not have one, optical audio is the next best wired option. This uses a thin fiber-optic cable that carries sound from your TV to the soundbar with no loss of quality.
Locate the optical audio port on your TV — it is a small square opening, usually labeled "Optical Out" or "Digital Audio Out," and is often found near the HDMI ports on the back. Plug one end of an optical cable into your TV and the other into the optical port on your soundbar. Turn both devices on.
Go to your TV's Settings, select Sound, and choose the optical output as your audio device. The soundbar will begin receiving sound from your TV. Optical cables are inexpensive and widely available at electronics stores or online retailers.
Connecting via Bluetooth for a wireless setup
Samsung smart TVs and most soundbars support Bluetooth, which means you can connect them without any cables. This is useful if your TV and soundbar are far apart or if you want to avoid running cables across your room.
On your soundbar, press the Bluetooth button or switch to Bluetooth mode — check your soundbar's manual for the exact button, as it varies by model. The soundbar will enter pairing mode, usually indicated by a blinking light. On your TV, go to Settings, select Sound, and look for Bluetooth Devices or Wireless Speaker. Select your soundbar from the list when it appears.
Once paired, your TV will send audio to the soundbar over Bluetooth every time you turn both devices on. The downside is that Bluetooth can introduce a slight delay between the picture and sound, which is usually not noticeable for regular TV watching but may be obvious during fast-action movies or video games. If this bothers you, use HDMI eARC or optical audio instead.
Connecting a soundbar with a 3.5mm headphone jack
Older soundbars sometimes have a 3.5mm audio input (a small round jack) instead of optical or HDMI. Your Samsung TV may not have a matching audio output, but you can use an adapter to make the connection work.
Check your TV's back panel for a headphone jack or audio output port. If your TV has one, buy a 3.5mm audio cable and plug one end into the TV and the other into the soundbar. If your TV does not have a 3.5mm output, you can buy an optical-to-3.5mm adapter, which converts the optical signal to a format the soundbar understands. Plug the optical cable into your TV, connect it to the adapter, and then run the 3.5mm cable from the adapter to the soundbar.
This method is less common on newer equipment, but it works reliably if you are using an older soundbar or TV.
Troubleshooting when you hear no sound
If you have plugged in the cable but hear nothing from the soundbar, the TV is still sending sound to its built-in speakers instead of the external device. Go to Settings, then Sound, and look for Speaker Settings, Sound Output, or External Speaker. You should see a list of audio devices — select your soundbar by name.
If the soundbar does not appear in the list, unplug it, wait 10 seconds, and plug it back in. Then go back to the Sound settings and refresh the device list. Some soundbars require you to press a specific button to enter pairing mode before the TV can find them.
If you are using HDMI eARC and the soundbar still does not show up, check that you plugged the cable into the correct HDMI port. Not all HDMI ports on your TV support eARC — only the one labeled as such. If you used the wrong port, move the cable to the eARC port and try again.
For Bluetooth connections, make sure the soundbar is in pairing mode and that your TV's Bluetooth is turned on. Go to Settings, select Bluetooth, and toggle it on if it is off. Then try pairing again.
Adjusting volume and sound settings after connection
Once your soundbar is connected and producing sound, you can control its volume using your TV remote. Most Samsung remotes send volume commands through HDMI eARC or optical audio automatically, so you do not need a separate soundbar remote for everyday use.
If you want to fine-tune the sound, go to your TV's Settings, select Sound, and look for options like Bass, Treble, or Equalizer. Some soundbars also have their own app or remote control that lets you adjust these settings separately. Check your soundbar's manual to see what options are available.
If the soundbar volume is too quiet even at maximum, your TV's audio output level may be set too low. In Sound settings, look for Volume Levels or Audio Output Level and increase it. This is different from the regular volume control and affects how much sound the TV sends to the soundbar.
When to call a professional or contact support
Most soundbar connections work without help, but if you have tried all the steps above and still hear no sound, contact your soundbar manufacturer's support team. They can walk you through model-specific troubleshooting or determine whether the soundbar has a hardware problem.
If your TV is not recognizing the soundbar at all — even after unplugging and replugging — your TV's audio output port may be damaged. Samsung's support line can help you test this, and if the port is faulty, the TV may need repair.
If you are unsure which cable to buy or which port to use on your specific TV model, check your TV's manual or visit Samsung's support website and search for your model number. The manual will show you exactly where each port is located and which one supports eARC.
Frequently Asked Questions
Do I need a special HDMI cable for eARC?
No. Any standard HDMI cable works with eARC. You do not need to buy an expensive "eARC cable" — a regular HDMI cable from any electronics store will do the job. The eARC feature is built into the port itself, not the cable.
Can I use both the soundbar and my TV speakers at the same time?
Most Samsung TVs will not send sound to both devices at once. When you select the soundbar as your audio output, the TV speakers turn off. If you want sound from both, you would need to use a different setup, such as connecting the soundbar to a separate audio receiver.
Why is there a delay between the picture and sound when I use Bluetooth?
Bluetooth has a small built-in delay as it processes and transmits audio wirelessly. For most TV watching this is not noticeable, but it becomes obvious during fast-action scenes or gaming. If this bothers you, switch to HDMI eARC or optical audio, which have no delay.
What if my soundbar has no eARC or optical port?
Check your soundbar's manual to see what inputs it has. If it only has Bluetooth or a 3.5mm jack, use Bluetooth for a wireless connection or buy a 3.5mm cable if your TV has an audio output port. Some very basic soundbars have limited connection options, but Bluetooth is almost always available.
Will connecting a soundbar disable my TV's built-in speakers?
No. The speakers remain in your TV, but they will not produce sound once you select the soundbar as your audio output. If you unplug the soundbar or change the audio output back to the TV speakers, the built-in speakers will work again.