The fastest way: HDMI with ARC or eARC

Most soundbars connect to your TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This is the easiest method because one cable carries both picture and sound, and your TV controls the soundbar's volume using your remote.

Look at the back of your TV for ports labeled HDMI 3, HDMI 4, or HDMI (ARC). The label matters—not every HDMI port supports ARC. If your TV manual is online, search for "HDMI ARC port" to find the exact location. Plug one end of an HDMI cable into that port and the other end into the HDMI input on your soundbar (usually on the back). Turn on both devices, and they should recognize each other within seconds.

If your TV is older and has no ARC port, or if ARC isn't working, move to the optical cable method below. Do not assume the connection failed until you've checked the TV's audio output settings—sometimes ARC is disabled by default.

Key Takeaways

  • HDMI ARC is the simplest connection: one cable from your TV's ARC port to your soundbar, and your TV remote controls the volume.
  • If your TV has no ARC port or it isn't working, use an optical cable from your TV's optical audio output to your soundbar's optical input.
  • Bluetooth works for streaming from phones and tablets but not for TV sound, so use it only as a backup method.
  • After connecting, go into your TV's audio settings and set the output to "External Speaker" or "Soundbar" so sound goes through the soundbar instead of the TV's built-in speakers.
  • If you have a cable box or streaming device, connecting it directly to the soundbar with HDMI often works better than running everything through the TV.

Optical cable: the reliable second choice

If HDMI ARC is not available or not working, an optical cable (also called a Toslink cable) is the next best option. It carries audio only, not video, but it is very reliable and works with almost every TV made in the last 15 years.

Find the optical audio output port on your TV—it is a small square opening, usually labeled "Optical Out" or "SPDIF." Plug one end of the optical cable into that port. Plug the other end into the optical input on your soundbar (also a small square opening, usually on the back). Turn on both devices.

After connecting, go into your TV's settings menu, find the audio or sound section, and look for an option called "Audio Output," "Speaker Output," or "Sound Out." Change it from "TV Speaker" to "External Speaker," "Optical," or "Soundbar"—the exact wording depends on your TV brand. This tells your TV to send sound to the soundbar instead of its own speakers.

Bluetooth: for phones and tablets, not TV sound

Most soundbars have Bluetooth, but it should not be your first choice for TV sound. Bluetooth has a slight delay (called latency) that makes dialogue sound out of sync with the actors' lips. It works fine for music from your phone, but for watching TV, HDMI or optical is much better.

If you want to use Bluetooth anyway, press the Bluetooth button on your soundbar or its remote until the light blinks. Then go to your TV's Bluetooth settings, search for available devices, and select your soundbar. The pairing usually takes a few seconds. However, you will still need to change your TV's audio output setting to "Bluetooth" in the sound menu, just as you would with optical.

Connecting a cable box or streaming device directly to the soundbar

If you have a cable box, satellite box, or streaming device (like a Roku or Apple TV), you can often get better sound by connecting it directly to the soundbar instead of routing everything through the TV. This bypasses your TV's audio processing and gives you a cleaner signal.

Plug an HDMI cable from your cable box or streaming device into one of the HDMI inputs on your soundbar. Then plug another HDMI cable from the HDMI output (or "TV Out") port on your soundbar into your TV's HDMI input. This way, video goes to the TV and sound goes to the soundbar at the same time.

This setup works especially well if your TV's ARC port is not working or if you want to use the soundbar's own audio processing. The downside is that you now have two HDMI cables instead of one, and you may need to switch inputs on the soundbar if you want to use multiple devices.

Fixing sound that is not coming through the soundbar

If you have plugged everything in but hear sound from your TV's speakers instead of the soundbar, the problem is almost always in your TV's audio settings, not the cable. Go to your TV's settings menu, find the audio or sound section, and look for "Audio Output," "Speaker Output," or "Sound Out." Make sure it is set to "External Speaker," "Soundbar," "Optical," or "HDMI ARC"—not "TV Speaker" or "Internal Speaker."

If you are using HDMI ARC and the soundbar still is not getting sound, try unplugging both devices for 30 seconds, then plugging them back in. Sometimes the handshake between TV and soundbar fails on the first try. If that does not work, check whether your TV's ARC port is actually enabled in the settings menu—some TVs have it turned off by default.

If you are using an optical cable and sound is still not working, make sure the cable is pushed all the way into both ports. Optical cables are straightforward to insert halfway without realizing it. Also check that your TV's audio output is set to "Optical" or "External Speaker," not "TV Speaker."

Volume control and remote setup

With HDMI ARC, your TV remote should control the soundbar's volume automatically. If it does not, go into your TV's settings, find the audio section, and look for an option called "HDMI Control," "CEC," or "Anynet+" (the name varies by brand). Turn it on. This allows your TV to send volume commands to the soundbar.

With an optical cable, your TV remote will not control the soundbar's volume—you will need to use the soundbar's remote or a universal remote. Some soundbars let you control volume from your phone using their app, which is convenient if you lose the physical remote.

If you want one remote to control everything, buy a universal remote that supports your TV brand. Program it to control both your TV and soundbar, and you can adjust volume without switching remotes.

Frequently Asked Questions

Do I need a special HDMI cable for ARC?

No. Any standard HDMI cable works for ARC. You do not need to buy an expensive "ARC cable"—the difference is in the port on your TV and soundbar, not the cable itself. A basic HDMI cable costs a few dollars and works just as well as a premium one.

Can I use both the soundbar and my TV speakers at the same time?

Yes, but you have to turn off the TV speaker mute in your audio settings. Go to your TV's sound menu and look for an option like "TV Speaker" or "Internal Speaker," then set it to "On" instead of "Off." Both will play at the same time, though this usually sounds worse than using the soundbar alone.

What if my soundbar has no HDMI input, only optical?

Use the optical cable method. Plug an optical cable from your TV's optical output into your soundbar's optical input, then change your TV's audio output setting to "Optical" or "External Speaker." Optical works just as well as HDMI for sound—it just does not carry video.

Why does my soundbar keep disconnecting from Bluetooth?

Bluetooth can drop the connection if your phone or another device is trying to pair at the same time, or if the soundbar is too far from the TV. Move the soundbar closer to the TV and make sure no other Bluetooth devices are actively trying to connect. For TV sound, use HDMI or optical instead—they do not have this problem.

Can I connect my soundbar to my TV and my phone at the same time?

Most soundbars can pair with multiple devices but only play from one at a time. You can have your TV connected via HDMI and your phone connected via Bluetooth, then switch between them using the soundbar's input button. Some soundbars let you set a priority so TV sound always takes over when it detects a signal.