The fastest way: HDMI ARC or eARC

The simplest connection uses a single HDMI cable and a feature called HDMI ARC (or the newer eARC). This lets your TV send sound to the soundbar through the same cable that carries picture, so you need only one wire between them. Most Vizio TVs made in the last five years have an ARC-capable HDMI port — usually HDMI 3 or HDMI 4, though your manual will confirm which one.

Plug one end of an HDMI cable into the ARC port on your Vizio TV and the other end into the HDMI input on your soundbar. Then go into your TV's settings, find the audio or sound menu, and turn on HDMI ARC. Your TV will now send all sound through the soundbar instead of its own speakers. You may need to turn down or mute the TV's built-in speakers so you hear only the soundbar.

If your soundbar also has a power cable, plug that in. Most soundbars turn on automatically when they receive a signal from the TV, but some have a standby mode you can adjust in their settings menu.

Key Takeaways

  • HDMI ARC is the easiest method because one cable carries both picture and sound, and it works with any input source on your TV.
  • Your Vizio TV's ARC port is usually HDMI 3 or HDMI 4 — check your manual or the port labels on the back of the TV.
  • After connecting the cable, enable HDMI ARC in your TV's audio settings so sound routes to the soundbar instead of the TV's speakers.
  • If HDMI ARC does not work, optical audio (TOSLINK) is a reliable backup that requires a separate cable but works on almost all soundbars and Vizio TVs.

Using optical audio if HDMI ARC is not available

If your Vizio TV or soundbar does not have HDMI ARC, or if you prefer a separate audio cable, use the optical audio port (also called TOSLINK). This is a small square port on the back of your TV and soundbar that accepts a thin optical cable. Optical audio carries sound only, not picture, so you still need HDMI for video if you are connecting a device like a streaming box or game console.

Plug the optical cable into the optical audio output on your Vizio TV and into the optical input on your soundbar. Then go into your TV's settings, find the audio menu, and set the audio output to optical. Your TV will now send sound through the cable to the soundbar. Like with HDMI ARC, you may need to mute or lower the TV's built-in speakers.

Optical audio is reliable and works on nearly every soundbar made in the last ten years. The main drawback is that it carries less information than HDMI ARC, so some newer soundbars with advanced audio formats (like Dolby Atmos) may not use those features over optical. For most people watching regular TV or streaming, this does not matter.

Connecting through a cable box, streaming device, or game console

If you watch cable TV through a box, or you use a streaming device like a Roku or Apple TV, you can route sound from that device directly to the soundbar instead of going through your TV. This is often cleaner than routing through the TV because you avoid the TV's audio processing.

Connect your cable box or streaming device to your TV with HDMI as usual. Then connect the same device to your soundbar using either HDMI ARC (if the device has it) or optical audio. In the device's settings, set the audio output to go to the soundbar. Your TV will still show the picture, but the soundbar will handle all the sound.

This method works well if you use one main device for most of your watching. If you switch between many sources — cable, streaming apps on the TV itself, a game console — routing through the TV with HDMI ARC is usually simpler because the TV automatically sends all sound to the soundbar regardless of the source.

Wireless connection using Bluetooth

Some Vizio TVs and soundbars support Bluetooth, which means you can pair them without any cable. This is useful if you cannot run a cable easily, or if you want to move the soundbar around. Bluetooth audio is reliable for everyday TV watching, though it may have a slight delay (usually less than a second) that you might notice during movies.

To pair them, put your soundbar in Bluetooth pairing mode — usually by holding a button on the soundbar or using its remote. Then go into your Vizio TV's settings, find Bluetooth, and search for available devices. Select your soundbar from the list. Once paired, your TV will automatically connect to the soundbar when you turn it on.

Check your soundbar's manual to see if it supports Bluetooth, because not all models do. If it does not, stick with HDMI ARC or optical audio. Bluetooth is also less reliable than a wired connection if you have other wireless devices nearby, so if you experience dropouts or stuttering, a cable connection is a better choice.

Adjusting volume and audio settings after connection

Once your soundbar is connected, you may need to adjust a few settings so the sound works the way you want. In your TV's audio menu, look for an option called "Audio Out" or "Speaker Output" and make sure it is set to send sound to the soundbar, not the TV's speakers. Some Vizio TVs have a setting called "TV Speaker" that you should turn off.

If the soundbar is too quiet or too loud, you can control the volume using your soundbar's remote or, on many models, your TV remote. Some soundbars also have a volume control on the back or side. Start with the soundbar at a medium level and adjust from there.

If you notice the sound is out of sync with the picture (the actors' lips move before you hear them speak), this is called audio delay. Go back into your TV's audio settings and look for "Audio Delay" or "Lip Sync" — you can usually adjust this in small increments until the sound matches the picture. This is rare with HDMI ARC but more common with optical audio or Bluetooth.

Troubleshooting when the soundbar does not produce sound

If you have connected everything but hear nothing from the soundbar, start by checking that the soundbar is powered on — look for a light on the front. Then make sure the cable is plugged in firmly on both ends. A loose connection is the most common reason sound does not work.

Next, go into your TV's audio settings and confirm that the audio output is set to the soundbar, not the TV speakers. If you are using HDMI ARC, make sure you plugged the cable into the correct HDMI port (usually HDMI 3 or 4) and that HDMI ARC is enabled in the settings. If you are using optical audio, check that the cable is fully inserted into both ports — optical cables need to be pushed in firmly.

If the soundbar still does not work, try unplugging it for 30 seconds and plugging it back in. This resets the soundbar and often fixes connection problems. If that does not help, check your soundbar's manual to see if there is a factory reset button or procedure. If you have tried all of this and the soundbar still produces no sound, the soundbar itself may be faulty and you should contact the manufacturer.

When to call a professional

Most soundbar connections are straightforward enough to do yourself, but there are a few situations where professional help makes sense. If your TV or soundbar is still under warranty and you are worried about damaging it, a technician can handle the setup. If you have a complex home theater setup with multiple devices and you want everything to work seamlessly, an installer can design a system that works for your space.

You should also call a professional if you need to run cables through walls or ceilings, because this requires tools and knowledge about electrical codes and fire safety. For a straightforward connection using existing cables and ports, you do not need outside help.

Frequently Asked Questions

Can I use both HDMI ARC and optical audio at the same time?

You can connect both cables, but your TV will only send sound through one of them. In the audio settings, choose which one you want to use. There is no benefit to having both connected — pick the one that works best and leave the other unplugged to reduce clutter.

Why does my soundbar only work when I use a specific HDMI port?

Only certain HDMI ports on your TV support ARC. These are usually HDMI 3 or HDMI 4, but your TV's manual will tell you which one. If you plug the soundbar into a different port, it will not receive audio. Check your manual or the labels on the back of the TV to find the ARC port.

Do I need to turn off the TV speakers when I connect a soundbar?

You do not have to, but you should mute or disable them in the audio settings. If both the TV and soundbar are playing sound at the same time, you will hear an echo and the sound quality will be poor. Most Vizio TVs have a setting to turn off the internal speakers once a soundbar is connected.

Will my TV remote control the soundbar's volume?

Usually yes, if you use HDMI ARC. Your TV remote will adjust the soundbar's volume just like it would adjust the TV's speakers. With optical audio or Bluetooth, you may need to use the soundbar's remote to change the volume, depending on the model. Check your soundbar's manual to see what it supports.

What if my soundbar has a subwoofer — do I need to connect that separately?

Most soundbars with subwoofers connect wirelessly, so the subwoofer pairs with the soundbar itself, not the TV. You just plug the subwoofer into power and follow the pairing instructions in the manual. The TV only needs to connect to the soundbar, and the soundbar handles the rest.