The fastest way: HDMI with ARC or eARC
Most soundbars connect to your TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This is the simplest method because one cable carries both picture and sound, and your TV controls the soundbar's volume with your remote. If your TV has an eARC port (newer models from 2016 onward usually do), use that—it's faster and more reliable than standard ARC.
Plug the HDMI cable into the ARC or eARC port on your TV and the HDMI Out port on the soundbar. Then go into your TV's settings menu, find the sound or audio section, and turn on HDMI ARC or eARC. Your TV will recognize the soundbar automatically. Test it by pressing the volume button on your TV remote—the soundbar should respond. If it doesn't, restart both devices and check that ARC is enabled in the settings.
Common mistake: plugging the cable into a regular HDMI port instead of the ARC port. Regular HDMI ports don't send sound back to the soundbar, so you'll see picture but hear nothing.
Key Takeaways
- HDMI ARC or eARC is the easiest connection—one cable, one remote control, automatic setup.
- Your TV must have an ARC or eARC port, usually labeled on the back; check your TV manual if you're unsure which port it is.
- After plugging in the cable, enable HDMI ARC in your TV's audio settings so the two devices can communicate.
- If HDMI doesn't work, optical audio (TOSLINK) is the most reliable backup method and works on almost all TVs.
- Bluetooth is convenient for music but not ideal for TV watching because of slight audio delay.
Optical audio (TOSLINK) for older TVs or when HDMI fails
If your TV doesn't have ARC, or if HDMI isn't working, use an optical audio cable (also called TOSLINK). This thin cable carries sound only, not picture, but it's rock-solid reliable and works on nearly every TV made in the last 15 years. Plug one end into the optical audio port on the back of your TV (it's a small square opening with a red or black plastic cap) and the other end into the optical input on the soundbar.
Optical audio requires one extra step: go into your TV's audio settings and change the audio output from the TV speakers to optical. Without this change, sound will still come from the TV's tiny speakers instead of the soundbar. Once you've made that change, test the volume with your TV remote. If you hear sound from the soundbar, you're done. If you still hear the TV speakers, go back to settings and make sure the optical output is selected, not HDMI or internal speakers.
Optical cables are inexpensive (usually under $10) and come with most soundbars. If yours didn't, any electronics store carries them. The cable itself doesn't wear out, so you can leave it plugged in permanently.
Bluetooth for music and streaming apps
Bluetooth is the easiest to set up but has one drawback: a slight delay between the picture on your TV and the sound from the soundbar. This delay (usually 100 to 200 milliseconds) is barely noticeable for music or streaming shows, but it becomes obvious when watching movies or sports where you see lips move before hearing words. For that reason, use Bluetooth only for music, podcasts, or casual streaming.
To connect via Bluetooth, put your soundbar in pairing mode by holding the Bluetooth button on the remote or the soundbar itself for three seconds until you see a blinking light. Then go to your TV's Bluetooth settings, search for devices, and select your soundbar from the list. Once paired, the soundbar will connect automatically whenever it's turned on and in range.
Bluetooth pairs your TV to the soundbar, but it doesn't pair your soundbar to other devices. You can pair the same soundbar to your phone, tablet, or laptop separately, and switch between them by turning the soundbar off and on or manually selecting it in each device's Bluetooth menu.
Connecting a soundbar with a wireless subwoofer
If your soundbar comes with a separate subwoofer, the subwoofer pairs to the soundbar wirelessly—you don't connect it to the TV. Place the subwoofer in the corner of the room or under a table, plug it in, and press the pairing button on both the soundbar and subwoofer. They'll find each other within 10 seconds, and you'll see a light on the subwoofer turn solid (usually blue or white). From that point on, they pair automatically whenever both are powered on.
The subwoofer communicates with the soundbar on a private wireless channel, separate from your TV connection. This means the soundbar still connects to your TV via HDMI, optical, or Bluetooth—the subwoofer doesn't change that setup. If the subwoofer loses connection, restart both devices and press the pairing button again.
Troubleshooting when you hear nothing
If you've plugged everything in but hear no sound, check these three things in order. First, make sure the soundbar is powered on—look for a light on the front. Second, check that your TV's audio output is set to the soundbar, not the TV speakers. Go to Settings > Sound or Audio and look for an option called "Speaker" or "Audio Output"—select the soundbar or HDMI ARC from that menu. Third, turn the soundbar's volume up using its remote or the button on the back; it may be muted or set very low.
If you're using HDMI ARC and still hear nothing, unplug both the TV and soundbar for 30 seconds, plug them back in, and wait for them to fully restart. Then check the TV's audio settings again—sometimes the ARC setting resets after a power cycle. If optical audio isn't working, make sure the cable is pushed all the way into both ports; a loose connection is the most common cause of silent optical audio.
Controlling volume and switching inputs
When you use HDMI ARC, your TV remote controls the soundbar's volume automatically—no second remote needed. The TV sends volume commands through the HDMI cable, so pressing the volume button on your TV remote adjusts the soundbar. If this isn't working, go back to your TV's audio settings and make sure HDMI ARC is enabled and the soundbar is selected as the audio output.
With optical audio, your TV remote controls the TV's volume setting, but the soundbar volume is separate. You'll need the soundbar's remote to adjust its volume. Most soundbars have a volume button on the back or side if you can't find the remote, but using the remote is faster. If you have multiple devices connected to your soundbar (TV on optical, phone on Bluetooth), you may need to switch the soundbar's input using its remote or the button on the back.
Positioning your soundbar for the best sound
Place the soundbar on a shelf or stand directly below or above your TV, centered in front of the screen. Sound travels in straight lines, so positioning it at ear level when you're sitting down gives you the clearest audio. If your soundbar has a subwoofer, place the subwoofer in a corner of the room or behind furniture—bass frequencies bounce around the room, so corner placement fills the space evenly without creating dead spots.
Avoid putting the soundbar inside a closed cabinet or behind glass doors; these block sound and muddy the audio. If your TV is mounted on the wall, mount the soundbar on the wall below it or on a stand in front of the TV. Keep the soundbar at least a foot away from walls on the sides to prevent sound from bouncing back and creating echoes.
Frequently Asked Questions
Do I need both HDMI and optical cables connected at the same time?
No. Use one connection method. If you connect both HDMI ARC and optical, your TV may send sound to both, or it may switch between them unpredictably. Choose HDMI ARC if your TV has it, and use optical only as a backup if HDMI doesn't work.
Why does my soundbar have a delay when I use Bluetooth?
Bluetooth has built-in latency—a small delay while the signal travels wirelessly. This is normal and unavoidable. For TV watching, use HDMI ARC or optical instead. Bluetooth works fine for music because there's no picture to sync with.
Can I connect my soundbar to my TV and my phone at the same time?
Most soundbars can pair with multiple devices but only play from one at a time. You can pair your phone via Bluetooth and your TV via HDMI ARC simultaneously. To switch, just start playing audio on the device you want—the soundbar will usually switch automatically, or you can select the input manually using the soundbar's remote.
What if my TV doesn't have ARC or optical audio?
Very old TVs sometimes lack both. In that case, use Bluetooth if your TV supports it, or connect a streaming device (like a Roku, Apple TV, or Fire Stick) to your TV and pair the soundbar to that device instead. The streaming device can send audio to the soundbar while displaying picture on your TV.
Do I need to restart my TV and soundbar after connecting them?
Not always, but it helps. After plugging in cables and enabling ARC in your TV's settings, restart both devices by unplugging them for 30 seconds. This clears any temporary glitches and forces them to recognize each other fresh. It solves most connection problems.