The fastest way to connect an LG soundbar to an LG TV
Most LG soundbars connect to LG TVs through HDMI ARC (Audio Return Channel), which sends sound from the TV back to the soundbar using a single cable. This is faster than older methods and lets you control both devices with one remote. If your TV and soundbar both have HDMI ARC ports — usually labeled ARC or eARC — this is the route to start with.
If HDMI ARC is not available on your TV model, you can use an optical audio cable instead. This works on nearly all LG TVs made in the last ten years, though it requires a separate cable and does not let you control the soundbar from your TV remote.
Bluetooth is a third option for some LG soundbars, but it is slower to set up and can drop connection if something interferes with the signal. Reserve Bluetooth for situations where the other two methods will not work.
Key Takeaways
- HDMI ARC is the best choice if both your TV and soundbar have an ARC port, because it uses one cable and works with your TV remote.
- An optical audio cable is the reliable backup if your TV does not have HDMI ARC, and works on almost all LG TVs.
- You must turn on HDMI ARC in your TV settings after plugging in the cable, or the soundbar will not receive sound.
- Bluetooth pairing takes longer but works if you cannot run a cable between the TV and soundbar.
- If sound still does not come through, check that the soundbar input is set to the correct source and that the TV volume is not muted.
Connecting via HDMI ARC — the recommended method
Start by locating the HDMI ARC port on both devices. On most LG TVs, the ARC port is HDMI 3 or HDMI 4, and it will be labeled on the back or side of the TV. On your LG soundbar, the HDMI port is usually on the back panel. If your soundbar has only one HDMI port, that is your ARC port.
Plug one end of an HDMI cable into the ARC port on your TV and the other end into the HDMI port on your soundbar. Use a standard HDMI cable — you do not need a special ARC cable, though newer eARC cables work fine too. Make sure both devices are powered off before you plug in the cable.
Turn on your TV and soundbar. Go to your TV's settings menu, find the sound or audio section, and look for an option called HDMI ARC or eARC. Turn this setting on. The exact menu path varies by TV model — on some LG TVs it is under Settings > Sound > Audio Out, while on others it is under Settings > Advanced > HDMI ARC. Check your TV manual if you cannot find it quickly.
Once HDMI ARC is enabled, the soundbar should receive sound from the TV automatically. Test it by turning up the TV volume. If you hear sound from the soundbar, the connection is working. If not, move to the troubleshooting section below.
Using an optical audio cable as a backup
An optical audio cable (also called a Toslink cable) is a thin cord with small square connectors on each end. It carries sound from your TV to the soundbar without needing HDMI. This method works on nearly all LG TVs, even older models that do not have HDMI ARC.
Find the optical audio output port on your TV — it is usually on the back panel and labeled "Optical Out" or "Digital Audio Out." On your soundbar, locate the optical input port, which looks identical. Plug one end of the optical cable into the TV and the other into the soundbar.
Turn on both devices. On your TV, go to Settings > Sound and look for an option called Audio Out or Digital Audio Out. Set it to "Optical" or "PCM." On your soundbar, press the input button on the remote or the soundbar itself until the display shows "Optical" or "D.In" (for digital input).
Test the connection by raising the TV volume. You should hear sound from the soundbar. Optical cables are reliable and rarely drop connection, but they do not allow your TV remote to control the soundbar volume — you will need to use the soundbar remote separately.
Pairing your soundbar via Bluetooth
Bluetooth is the slowest connection method but requires no cables. Use this only if you cannot run a cable between your TV and soundbar, or if your TV does not have HDMI ARC or optical output.
Make sure your soundbar is powered on and in pairing mode. Most LG soundbars enter pairing mode automatically when you first turn them on, or you can press and hold the Bluetooth button on the soundbar remote for three seconds. The soundbar display should show a Bluetooth symbol or blink a light.
On your TV, go to Settings > Sound > Bluetooth Speaker or Settings > Bluetooth, depending on your TV model. Select your soundbar from the list of available devices. The TV will pair with the soundbar — this usually takes 10 to 20 seconds.
Once paired, the TV will remember the soundbar and reconnect automatically each time you turn on the TV. However, Bluetooth can occasionally drop connection if there is interference from other wireless devices, or if the TV and soundbar are too far apart. If the connection drops, unpair the devices and pair them again.
Controlling soundbar volume from your TV remote
If you connected via HDMI ARC, your LG TV remote should control the soundbar volume automatically. Press the volume up or down button on your TV remote, and the soundbar volume should change. If it does not, go back to your TV settings and confirm that HDMI ARC is turned on.
With an optical cable, your TV remote will not control the soundbar. You must use the soundbar remote to adjust volume. This is a limitation of the optical connection, not a setup problem.
With Bluetooth, your TV remote may or may not control the soundbar, depending on your TV model and soundbar model. Check your soundbar manual to see if it supports TV remote control over Bluetooth. If it does not, use the soundbar remote.
Troubleshooting when sound does not come through
If you plugged in the cable but hear no sound, start with the simplest fixes. Check that the soundbar is powered on — look for a light on the front panel. Make sure the soundbar input is set to the correct source. Press the input button on the soundbar remote and cycle through the options until you see "HDMI," "Optical," or "Bluetooth" depending on which cable you used.
Next, check your TV volume. Press the volume up button on your TV remote several times. If the TV volume is muted, unmute it. Look at your TV screen — most LG TVs show a volume bar when you adjust volume. If the bar appears, the TV is receiving your command.
If the TV volume is up and the soundbar input is correct but you still hear nothing, go back to your TV settings and confirm that the audio output is set correctly. For HDMI ARC, make sure HDMI ARC is turned on in Settings > Sound. For optical, make sure Audio Out is set to "Optical" or "PCM." For Bluetooth, make sure the soundbar is paired and selected as the audio output device.
If the soundbar was working but suddenly stopped, try unplugging both the TV and soundbar for 30 seconds, then plugging them back in. This resets the connection and often fixes temporary glitches. If you are using HDMI ARC, also try unplugging the HDMI cable, waiting 10 seconds, and plugging it back in.
Choosing between HDMI ARC, optical, and Bluetooth
HDMI ARC is the best choice if your TV and soundbar both support it. It uses one cable, works with your TV remote, and handles newer audio formats. The only downside is that not all LG TVs have an ARC port — models from before 2015 usually do not.
Optical is the most reliable backup. It works on nearly every LG TV made in the last decade, the connection is rock-solid, and the cable is inexpensive. The trade-off is that you lose TV remote control and cannot use newer audio formats. If your TV does not have HDMI ARC, optical is usually your best bet.
Bluetooth is convenient when you cannot run a cable, but it is slower to set up and can drop connection. Use it only when the other two methods are not possible. If you go with Bluetooth, keep the TV and soundbar within 15 feet of each other and away from other wireless devices like routers or cordless phones.
Frequently Asked Questions
What if my LG TV does not have an HDMI ARC port?
Check the back of your TV for an optical audio output port. If it has one, use an optical cable instead — this works on almost all LG TVs. If your TV has neither HDMI ARC nor optical output, Bluetooth is your only option.
Can I use a regular HDMI cable for HDMI ARC?
Yes. A standard HDMI cable works fine for ARC. You do not need to buy a special ARC cable, though newer eARC cables are compatible and work the same way. Any HDMI cable will do.
Why does my soundbar keep disconnecting from Bluetooth?
Bluetooth can drop if the TV and soundbar are too far apart, or if other wireless devices are interfering. Try moving the soundbar closer to the TV, or turn off nearby routers and cordless phones temporarily to test. If the connection is still unstable, switch to HDMI ARC or optical instead.
Do I need to turn on HDMI ARC in my soundbar settings too?
No. The soundbar automatically recognizes HDMI ARC when you plug in the cable. You only need to turn on HDMI ARC in your TV settings. The soundbar does not have a separate HDMI ARC setting to enable.
Can I use both HDMI ARC and optical at the same time?
You can plug both cables in, but the soundbar will only listen to one input at a time. Use the soundbar remote to switch between inputs. Most people choose one method and stick with it to avoid confusion.