The basic connection process
Most Sony subwoofers connect to Sony soundbars wirelessly using a pairing process that takes about a minute. Turn on the soundbar first, then the subwoofer. Press and hold the pairing button on the back or bottom of the subwoofer (usually marked with a wireless symbol) for three to five seconds until you see a blinking light. The soundbar will detect the subwoofer automatically, and the light will stop blinking once they are connected. You should hear a confirmation tone from the soundbar.
If the wireless connection does not work, check that both devices are plugged in and within 10 feet of each other during pairing. Remove any large metal objects or other wireless devices between them, as these can interfere with the signal. If the subwoofer still will not pair, unplug both devices, wait 30 seconds, and try again.
Key Takeaways
- Sony subwoofers pair wirelessly to Sony soundbars by pressing the pairing button on the subwoofer while the soundbar is already powered on.
- The pairing process is automatic once you hold the pairing button—you do not need to enter codes or adjust settings in a menu.
- Keep the subwoofer within 10 feet of the soundbar during pairing, and move other wireless devices away temporarily if pairing fails.
- If wireless pairing does not work after a power reset, check your soundbar model number against the subwoofer's compatibility list, as not all Sony subwoofers work with all Sony soundbars.
Finding the pairing button on your subwoofer
The pairing button location varies by Sony subwoofer model. On most models, it is on the back panel near the power cord, marked with a wireless icon that looks like a curved line or radio waves. Some newer models place it on the bottom of the unit. If you cannot find it, check the manual that came with your subwoofer—you can also search for your model number on Sony's support website to read the manual as a PDF.
The button is usually small and recessed, so you may need a pen or thin object to press it. Do not use anything sharp that could damage the electronics inside. Hold it for the full three to five seconds even if nothing seems to happen at first—the light will begin blinking after you have held it long enough.
What to do if the subwoofer light stays on or off
A solid light (not blinking) on the subwoofer usually means it is already paired to a soundbar. If you are trying to pair it to a different soundbar, press and hold the pairing button again for a full five seconds. This will reset the pairing and allow it to connect to the new device.
If the light does not turn on at all, the subwoofer may not be receiving power. Check that the power cable is fully plugged into both the wall outlet and the subwoofer. Try a different outlet to rule out a tripped circuit breaker. If the light still does not appear, the subwoofer may have a power issue and you should contact Sony support or a technician.
Checking soundbar and subwoofer compatibility
Not every Sony subwoofer works with every Sony soundbar. Sony makes subwoofers designed for specific soundbar models or model families. Before you buy a subwoofer, check the product page or manual to confirm it lists your soundbar model. If you already own both devices and pairing fails after multiple attempts, incompatibility may be the reason.
You can find your soundbar model number on a sticker on the back or bottom of the unit, or in the settings menu under System Information or About. Search that model number on Sony's website along with "compatible subwoofers" to see which models will work. If your subwoofer is not listed, it will not pair no matter how many times you try the pairing button.
Adjusting subwoofer volume and bass settings
Once the subwoofer is paired, you control its volume through the soundbar's remote or app. Most Sony soundbars have a subwoofer volume setting in the audio menu—look for "Sub Level," "Subwoofer Volume," or "Bass" in the settings. Use the remote to navigate to this menu and adjust the level up or down. Start at the middle setting and increase it gradually until the bass sounds balanced with the rest of the sound.
If your soundbar has a Sony remote app on your phone, you can also adjust subwoofer volume there. The app shows the same menu options as the physical remote. Some models also have a physical volume dial on the back of the subwoofer itself, which you can turn to fine-tune the bass without using the remote.
Troubleshooting a subwoofer that was previously paired
If you are moving the subwoofer to a different room or connecting it to a new soundbar, it may still be paired to the old soundbar. Unplug the old soundbar from power for at least one minute, then plug it back in. This clears its memory of the subwoofer. Now try pairing the subwoofer to the new soundbar using the pairing button method described above.
If the subwoofer keeps reconnecting to the old soundbar, move it far away from that soundbar (at least 30 feet) before attempting to pair it to the new one. Once the new pairing is complete, you can move the subwoofer back to its final location. If this still does not work, reset both devices by unplugging them for 30 seconds, then try pairing again with them close together.
When to call Sony support or a technician
If you have tried pairing multiple times, confirmed compatibility, and the subwoofer light does not blink during pairing, the wireless module in one of the devices may be faulty. Sony support can walk you through additional troubleshooting steps over the phone or via chat on their website. Have your soundbar and subwoofer model numbers ready when you contact them.
If the devices are still under warranty, Sony may replace the faulty unit at no cost. If they are out of warranty, a technician can sometimes repair the wireless module, though replacement may be more cost-effective depending on the age of the equipment. Do not attempt to open either device yourself, as this can damage internal components and void any remaining warranty.
Frequently Asked Questions
Do I need to use a cable to connect the subwoofer to the soundbar?
No. Sony subwoofers designed for Sony soundbars connect wirelessly. If you have a cable connection option, it is usually for older models or non-Sony soundbars. Wireless is the standard for current Sony products and requires no setup beyond pressing the pairing button.
Can I use a Sony subwoofer with a non-Sony soundbar?
Most Sony subwoofers are designed only for Sony soundbars and will not pair with other brands. Some universal subwoofers exist, but they are not common. Check the subwoofer manual or product page to see which brands it supports before purchasing.
How far away can the subwoofer be from the soundbar?
The wireless connection typically works within 30 feet, though walls and metal objects reduce this range. During pairing, keep them within 10 feet. Once paired, you can move the subwoofer to another room, but if the connection drops frequently, move it closer to the soundbar or remove obstacles between them.
What if the subwoofer pairs but produces no sound?
Check that the subwoofer volume is not set to zero in the soundbar's audio menu. Also confirm the subwoofer is powered on—look for a light on the back or bottom. If both are correct, try unplugging the subwoofer for 30 seconds and plugging it back in. If sound still does not come through, contact Sony support.
Can I pair multiple subwoofers to one soundbar?
Most Sony soundbars support only one subwoofer at a time. If you have two subwoofers, you would need two soundbars, or you can use only one subwoofer with your soundbar. Check your soundbar manual to confirm whether it supports multiple subwoofers, as some newer models may have this feature.