The simplest mounting method depends on your TV and soundbar model
Most soundbars mount in one of three ways: on the wall below your TV, on a TV stand or shelf directly under the screen, or attached to the TV itself using a bracket. The right choice depends on whether your TV has a VESA mounting pattern (a standardized hole pattern on the back), whether your soundbar has a mounting bracket included, and how your TV is currently installed. If your TV is wall-mounted, a wall-mounted soundbar below it is usually easiest. If your TV sits on a stand, placing the soundbar on the same stand or shelf often works without any mounting hardware at all.
Before you buy any brackets or drill any holes, check three things: your TV's manual for the VESA pattern and weight limit, your soundbar's manual for mounting instructions and weight, and the wall or surface where you plan to mount. A soundbar that weighs 5 pounds needs different hardware than one that weighs 15 pounds, and drywall alone cannot hold either one safely.
Key Takeaways
- Check your TV's VESA pattern and weight capacity in the manual before buying any mounting bracket.
- Wall mounting below the TV requires finding studs or using heavy-duty drywall anchors rated for your soundbar's weight.
- Soundbars mounted directly to the TV use a bracket that attaches to the TV's VESA holes and holds the soundbar below the screen.
- Placing a soundbar on a TV stand or shelf requires no drilling if the surface is stable and level.
- Most soundbars come with a wall-mounting template that shows exactly where to drill holes.
Placing a soundbar on a stand or shelf without mounting
If your TV sits on a stand or entertainment center, the easiest option is to place the soundbar on the same surface directly below the TV. This requires no brackets, no drilling, and no hardware. The soundbar straightforward sits in front of the TV stand or on the shelf below it, with cables running behind or to the side.
For this to work safely, the surface must be level, stable, and deep enough that the soundbar does not overhang the edge. If your TV stand is narrow or your soundbar is large, the soundbar may tip forward when you press buttons on top or when a pet or child bumps it. Test the setup before you run cables permanently—push gently on the soundbar to confirm it will not rock or slide. If it does, you need a bracket or a different location.
Wall mounting a soundbar below a wall-mounted TV
Wall mounting is the most common choice when your TV is already mounted on the wall. The soundbar hangs on the wall directly below the TV, creating a clean, centered look. To do this safely, you need to know your soundbar's weight and find either wall studs or heavy-duty drywall anchors that can hold that weight.
Check your soundbar's manual for the weight and for the mounting template—most manufacturers include a paper template that shows exactly where to drill holes. Hold the template on the wall below your TV, centered horizontally, and mark the hole locations with a pencil. Use a stud finder to check whether any holes fall on a stud. If they do, drill pilot holes and screw directly into the stud. If they do not, you will need drywall anchors.
For soundbars under 10 pounds, toggle bolts or heavy-duty plastic anchors rated for at least the soundbar's weight will hold safely in drywall. For soundbars heavier than 10 pounds, use lag bolts with heavy-duty anchors, or move the mounting location so at least one hole lands on a stud. Drill pilot holes slightly smaller than the anchor diameter, tap the anchors into the wall, then screw the mounting bracket into the anchors. Hang the soundbar on the bracket and test that it does not sag or shift.
Attaching a soundbar bracket directly to your TV
Some soundbars come with a bracket that attaches to the back of your TV using the TV's VESA holes. This method keeps the soundbar and TV as a single unit—if you move the TV, the soundbar moves with it. It works only if your TV has a VESA pattern and if the soundbar bracket is designed for your TV's VESA size.
VESA patterns are labeled by the distance between holes in millimeters—common sizes are 100x100, 200x200, and 300x300. Check your TV's manual for the exact VESA pattern. If your soundbar bracket does not match, it will not fit. If it does match, remove the TV from its wall mount or stand, lay it face-down on a soft surface like a blanket, and attach the bracket to the VESA holes using the bolts provided. The bracket typically holds the soundbar below the TV's bottom edge. Once the bracket is find, remount the TV on the wall or stand with the soundbar attached.
Using a TV stand mount for soundbars
If your TV sits on a stand and you want the soundbar mounted but not on the wall, a TV stand mount bracket is an option. This bracket clamps or bolts to the TV stand itself and holds the soundbar below the TV. It does not require drilling into the wall and works well if your TV stand is sturdy and has room underneath.
Measure the width of your TV stand's top surface and the space below the TV to confirm the bracket will fit. Clamp or bolt the bracket to the stand according to the manufacturer's instructions, then slide the soundbar into the bracket. This method is reversible—you can remove the bracket without damaging the stand or wall. It is a good choice if you rent or plan to rearrange your setup later.
Routing cables safely after mounting
Once the soundbar is mounted, run cables behind the TV or along the wall to hide them. If the soundbar is wall-mounted below the TV, cables can run down the wall and behind the TV stand, or you can use a cable raceway—a plastic channel that attaches to the wall and hides wires inside. Raceways are inexpensive and come in white, black, or wood finishes to match your wall.
If you are running cables through walls, do not drill through studs or existing electrical wiring. If you are unsure where wires run, use a wire detector before drilling. Keep power cables away from water sources and do not pinch them under the TV stand or behind furniture, as this can damage the insulation and create a fire risk.
When to call a professional installer
If your TV is mounted on plaster, brick, or concrete, or if you are uncomfortable drilling into walls, a professional installer can handle the job. They have the right anchors and tools for different wall types and can may support the soundbar is level and find. Installation typically costs between $50 and $150 depending on wall type and location.
You should also call a professional if your soundbar is very heavy (over 15 pounds), if you want to hide cables inside walls, or if you need to run new electrical outlets for the soundbar. Attempting these tasks without experience can damage walls, create safety hazards, or void your TV or soundbar warranty.
Frequently Asked Questions
Can I mount a soundbar above my TV instead of below it?
Technically yes, but it is not recommended. Sound travels downward and forward, so a soundbar above the TV will project sound away from where you are sitting. Below the TV is the standard position because it aims sound toward your ears and looks balanced with the screen.
What if my TV does not have a VESA pattern?
Many older or budget TVs lack VESA holes. In that case, you cannot attach a bracket directly to the TV. Instead, wall-mount the soundbar below the TV, place it on a stand or shelf, or use a TV stand mount bracket that clamps to the stand itself rather than the TV.
Do I need to remove my TV from the wall to attach a soundbar bracket?
Yes, if the bracket attaches to the TV's VESA holes, you will need to remove the TV from its wall mount, attach the bracket to the back, and remount the TV. If you are wall-mounting the soundbar separately below the TV, you do not need to remove the TV.
What size drywall anchors do I need?
The anchor size depends on your soundbar's weight and the hole diameter specified in the manual. Most soundbars under 10 pounds use toggle bolts or plastic anchors rated for 25 to 50 pounds. Heavier soundbars need lag bolts with heavy-duty anchors. Always buy anchors rated for at least 1.5 times your soundbar's weight for safety.
Can I mount a soundbar on a rental apartment wall?
Check your lease first—many landlords prohibit wall mounting. If mounting is not allowed, place the soundbar on a stand or shelf, or use a TV stand mount bracket that does not damage the wall. These options are reversible and leave no holes when you move out.