Mount your LG soundbar using the included bracket and wall anchors, or place it on a stand below the TV
LG soundbars come with a mounting bracket designed to attach directly under your LG TV using the same screw holes that hold the TV to its stand or wall mount. The bracket slides onto the soundbar's back panel, then fastens to the TV with four screws. If wall mounting isn't right for your setup, you can also place the soundbar on a TV stand or table directly below the screen. Both methods take 10 to 15 minutes and require only a screwdriver.
The exact mounting process depends on whether your TV is wall-mounted or sitting on a stand. Wall-mounted TVs use the bracket method almost exclusively. TVs on stands can use either the bracket or a tabletop placement. Either way, you'll need to locate the mounting holes on your TV's back panel — LG TVs have these holes whether or not you're using them.
Key Takeaways
- LG soundbars mount using a bracket that attaches to the same screw holes on the back of your LG TV that hold the stand or wall mount.
- You will need a Phillips head screwdriver and the mounting bracket that comes in the soundbar box — no additional hardware is required.
- Wall-mounted TVs should use the bracket method, while TVs on stands can use either the bracket or place the soundbar on a table below the screen.
- The soundbar should sit centered below the TV, with cables routed behind the TV or along the wall to keep the setup clean.
Gather your materials and check your TV setup
Before you start, remove the soundbar from its box and locate the mounting bracket. LG includes a metal bracket, four screws, and sometimes wall anchors or adhesive strips depending on the model. Check the soundbar's manual or the box label to confirm which mounting method your specific model uses — some newer LG soundbars use adhesive strips instead of screws.
Examine the back of your LG TV. You'll see a grid of screw holes, usually arranged in a rectangular pattern. These holes are standard on all LG TVs and are spaced to match VESA mounting standards. If your TV is currently on a stand, you can see these holes by looking at the back panel. If your TV is wall-mounted, you may need to gently pull it away from the wall or use a flashlight to see the holes. Write down the spacing between the holes — this tells you which holes to use on the bracket.
Attach the bracket to the soundbar
Lay the soundbar face-down on a soft surface like a towel or blanket to protect the speaker grille. Locate the bracket attachment points on the back of the soundbar — these are usually two or four slots or holes clearly marked in the manual. Slide the mounting bracket onto these points or insert the bracket's connector pins into the soundbar's slots. The bracket should sit flush against the soundbar's back panel.
Tighten any fasteners that hold the bracket to the soundbar, usually one or two screws on each side. Do not over-tighten — you only need enough pressure to keep the bracket from moving. The bracket should now be permanently attached to the soundbar and ready to mount to the TV.
Mount the soundbar to the TV using the bracket
Position the soundbar directly below your TV, centered on the screen. If your TV is wall-mounted, hold the soundbar up to the TV's back panel so the bracket's screw holes align with the TV's mounting holes. You may need a second person to hold the soundbar steady while you insert the screws. If your TV is on a stand, you can rest the soundbar on the stand's top surface while you align and tighten the screws.
Insert the four screws through the bracket holes into the TV's mounting holes. Use a Phillips head screwdriver and tighten each screw in a cross pattern — top-left, bottom-right, top-right, bottom-left — to may support even pressure. Tighten until the soundbar is snug against the TV, but do not force the screws. If a screw won't go in after gentle pressure, stop and check that the holes are aligned correctly.
Once all four screws are tight, gently push and pull the soundbar to confirm it doesn't move. The soundbar should be rock-solid and centered below the TV. If it shifts or feels loose, remove the screws, check the alignment, and reinstall.
Route cables and test the connection
Connect the soundbar to your TV using an HDMI cable, optical cable, or Bluetooth, depending on your TV model and soundbar features. Most LG TVs and soundbars support HDMI ARC (Audio Return Channel), which sends sound from the TV to the soundbar through a single HDMI cable. If your TV doesn't have HDMI ARC, use an optical cable instead — this is the thin cable with a small square connector.
Route the cables behind the TV or along the wall using cable clips or tape to keep them out of sight. If your soundbar uses a power cord, plug it into an outlet near the TV or use a power strip mounted behind the TV stand. Test the connection by playing sound through your TV — you should hear audio from the soundbar instead of the TV's built-in speakers.
Alternative: Place the soundbar on a stand or table
If you don't want to mount the soundbar to the TV, you can place it on a TV stand, media console, or table directly below the screen. This method works best if your TV is on a stand rather than wall-mounted. The soundbar should sit centered below the TV, with the front panel facing toward you and the back panel toward the wall.
Make sure the soundbar has at least two inches of clearance on all sides for air circulation and cable access. Keep the soundbar away from heat sources like radiators or direct sunlight. Connect the cables the same way as you would for a mounted soundbar — HDMI ARC is the easiest option if your TV supports it.
Troubleshoot common mounting problems
If the soundbar won't stay level after mounting, check that all four screws are equally tight. Uneven tightness can cause the soundbar to tilt. If the screw holes don't align, you may have the bracket positioned upside down or backward — remove the bracket from the soundbar, rotate it 180 degrees, and reattach it.
If you hear no sound from the soundbar after mounting, check that the cable is fully inserted into both the TV and the soundbar. If you're using HDMI ARC, go into your TV's audio settings and select the soundbar as the output device. If you're using an optical cable, make sure the TV's optical output is enabled in the settings menu. Restart both the TV and soundbar if sound still doesn't work.
If the soundbar is mounted but the TV's built-in speakers are still playing, mute the TV's internal speakers in the audio settings. Most LG TVs have an option to disable the built-in speakers when an external soundbar is connected.
Frequently Asked Questions
Can I mount an LG soundbar to a non-LG TV?
Yes, if the non-LG TV has the same VESA mounting hole pattern as your LG TV. Check your TV's manual for the VESA spacing, then compare it to the LG soundbar bracket's hole spacing. If they match, the bracket will work. If they don't match, you can place the soundbar on a stand below the TV instead.
What if my TV doesn't have mounting holes on the back?
Older or smaller LG TVs sometimes lack mounting holes. In this case, place the soundbar on a TV stand or table below the screen. You can also use adhesive mounting strips designed for soundbars, though these are less find than screw mounting and may not work on all TV materials.
Do I need to remove the TV from the wall to mount the soundbar?
Not necessarily. If you can reach the back of the TV and see the mounting holes with a flashlight, you can mount the soundbar without removing the TV. You may need a second person to hold the soundbar in place while you insert and tighten the screws. If the TV is mounted very close to the wall, you may need to pull it out slightly for easier access.
Will mounting the soundbar to the TV damage the TV?
No. The mounting holes are designed for this purpose and are used by TV stands and wall mounts. The screws are small and only go into the TV's frame, not into any internal components. Tightening the screws firmly but not excessively will not cause damage.
Can I mount the soundbar above the TV instead of below it?
Most LG soundbars are designed to mount below the TV for optimal sound projection toward the listener. Mounting above the TV is not recommended and may not work with the included bracket. If you want the soundbar above the TV, place it on a shelf or stand rather than using the bracket.