Where to Mount Your Samsung Soundbar
Mount your Samsung soundbar on the wall directly below your TV, or on a TV stand or shelf beneath the screen. The soundbar works best when it sits at ear level when you are seated, or slightly below. If your TV is mounted high on the wall, the soundbar should go on the wall below it rather than on a stand, so sound projects toward where you sit.
Check your TV's VESA mounting pattern — the four-hole grid on the back of your TV — before you buy a mounting bracket. Samsung soundbars come with different bracket options depending on the model. Some models include a universal bracket that fits multiple VESA patterns; others require a model-specific bracket you may need to order separately.
Avoid mounting the soundbar in a cabinet or enclosed space, as this muffles the sound. If you must place it in an entertainment center, leave at least 2 inches of open space on all sides of the soundbar.
Key Takeaways
- Mount the soundbar on the wall below your TV at ear level, or on a stand directly beneath the screen.
- Check your TV's VESA mounting pattern to confirm the bracket will fit before you begin installation.
- Use a stud finder to locate wall studs, and anchor into studs with lag bolts or heavy-duty wall anchors rated for your soundbar's weight.
- Run the power cable and any audio cables behind the wall or along the wall edge before mounting, so they are hidden and out of the way.
- Test the soundbar's connection to your TV or receiver after mounting to confirm audio is working before you finish.
Gather the Tools and Hardware You Will Need
Before you start, collect a stud finder, a drill with bits, a level, a tape measure, and a Phillips head screwdriver. You will also need the mounting bracket that came with your soundbar, or a replacement bracket if yours is missing or damaged.
For wall mounting, you need wall anchors or lag bolts. If you are mounting into drywall without studs, use heavy-duty toggle bolts or molly bolts rated for at least twice the weight of your soundbar. If you can mount into wall studs, use 3-inch lag bolts with washers. Check your soundbar's weight in the manual or on the product label — most Samsung soundbars weigh between 3 and 8 pounds, but larger models can weigh more.
If you are mounting on a TV stand or shelf, you may not need wall anchors at all. Some Samsung soundbars come with a stand bracket that sits on a flat surface and does not require drilling.
Locate Studs and Mark Your Mounting Points
Use a stud finder to locate the wall studs behind your drywall. Mark the stud locations with a pencil. Wall studs are typically 16 inches apart. If you can position the mounting bracket so that at least two of its holes line up with studs, your installation will be much stronger.
Hold the mounting bracket up to the wall at the height where you want the soundbar to sit. Use a level to make sure the bracket is straight. Mark the hole locations with a pencil, making small dots where the drill bit will go. Double-check that the bracket is level before you mark — a crooked soundbar is visible and looks wrong.
Measure the distance from the bottom of your TV to where the soundbar will sit. Most people leave 2 to 4 inches of space between the TV and the soundbar. If your TV is on a stand, make sure the soundbar will not block the stand's legs or any vents on the back of the TV.
Drill Holes and Install Wall Anchors
Drill pilot holes at each mark you made. Use a drill bit that is slightly smaller than your wall anchors or lag bolts. If you are drilling into studs, use a bit slightly smaller than the lag bolt diameter. If you are drilling into drywall only, use a bit that matches the anchor size.
If you are using toggle bolts or molly bolts, insert them into the pilot holes and tap them gently with a hammer until they sit flush against the wall. Then tighten the center screw with a screwdriver until the anchor is snug. Do not over-tighten, or you will strip the threads.
If you are using lag bolts into studs, insert the bolt directly into the pilot hole and tighten with a wrench or socket. The bolt should be snug but not so tight that you crack the drywall around it.
Attach the Bracket and Mount the Soundbar
Screw the mounting bracket to the wall using the bolts or anchors you just installed. Use a Phillips head screwdriver or a power drill on low speed. Make sure the bracket is tight and does not move when you push on it.
Slide the soundbar onto the bracket according to your model's instructions. Most Samsung soundbars have a slot or rail on the back that slides over a bar on the bracket. Lower the soundbar gently until it rests fully on the bracket. Some models have a locking mechanism — check your manual to see if you need to tighten a screw or flip a lever to find the soundbar in place.
Once the soundbar is mounted, check that it is level and does not tilt forward or backward. If it does, loosen the bracket slightly, adjust it, and tighten again.
Route Cables and Connect Power
Before you plug in the soundbar, decide how you will run the power cable and any audio cables. The cleanest look is to run cables behind the wall if your TV is wall-mounted, but this requires drilling a hole through the wall and may not be possible in your home.
If you cannot run cables behind the wall, use cable clips or a cable raceway to run them along the wall edge, down to an outlet or receiver. Cable raceways are plastic channels that mount to the wall and hide cables inside. They come in white, black, and other colors to match your wall.
Plug the soundbar into a power outlet. If the outlet is not near the soundbar, use a power strip or extension cord rated for the soundbar's amperage. Connect any audio cables — HDMI, optical, or 3.5mm — to your TV or receiver according to your soundbar model's manual.
Test the Connection and Adjust Settings
Turn on your TV and soundbar. Play a movie or music to confirm that sound is coming from the soundbar and not from your TV's built-in speakers. If you do not hear sound, check that the audio input on the soundbar is set to the correct source — HDMI, optical, or Bluetooth, depending on how you connected it.
If the soundbar is connected via HDMI, go into your TV's audio settings and make sure the TV is set to send sound to the HDMI output, not to the TV's internal speakers. If the soundbar is connected via optical cable, select the optical input on the soundbar and make sure your TV's optical output is turned on.
Once sound is working, adjust the volume and any bass or treble settings using the soundbar's remote or the Samsung SmartThings app if your model supports it. Most Samsung soundbars have a physical volume dial or buttons on the back or side.
Frequently Asked Questions
Can I mount a Samsung soundbar horizontally if my TV is in portrait mode?
No. Soundbars are designed to be mounted horizontally below a TV in landscape mode. If your TV is in portrait mode, the soundbar will not align with the screen and sound will not project correctly. Mount the soundbar horizontally below where the TV's center would be if it were in landscape.
What if I cannot find studs in the wall where I want to mount the soundbar?
Use heavy-duty toggle bolts or molly bolts rated for at least twice your soundbar's weight. These anchors grip the drywall from behind and hold much better than straightforward plastic anchors. Make sure the wall is not hollow or made of plaster, which requires different anchors.
Do I need to mount the soundbar, or can I just place it on a stand?
You can place most Samsung soundbars on a TV stand, shelf, or entertainment center without mounting them to the wall. A stand takes up space on your furniture but requires no drilling. A wall mount looks cleaner and frees up shelf space, but requires installation. Choose based on your room layout and preference.
How high should the soundbar be mounted above the floor?
Mount the soundbar at ear level when you are seated, or slightly below. For most people sitting on a couch, this is 24 to 36 inches above the floor. If your TV is mounted higher, the soundbar should still be below the TV but at a height where sound reaches your ears directly.
Can I mount the soundbar above the TV instead of below it?
You can, but it is not recommended. Sound will project downward and away from where you sit, making dialogue harder to hear. Mounting below the TV keeps sound aimed at ear level and creates a better viewing experience.