The three ways to mount a soundbar
You can mount a soundbar to your TV in three ways: on the wall above or below the screen, on a stand in front of the TV, or on a shelf or furniture piece nearby. Wall mounting looks cleanest and saves desk space. A stand works if you rent or don't want to drill into walls. A shelf mount is the fastest option if you already have furniture positioned right.
Wall mounting requires finding studs or using heavy-duty anchors, running a power cable, and securing the soundbar with brackets. Stand mounting needs only a flat surface and a power outlet. Shelf mounting is similar to stand mounting but uses existing furniture instead of a dedicated stand.
The method you choose depends on your wall type, your TV size, your room layout, and whether you want cables visible. Each approach takes between 15 minutes and an hour, depending on how much drilling or cable management you do.
Key Takeaways
- Wall mounting requires a stud finder or heavy-duty drywall anchors rated for your soundbar's weight, plus brackets that match your soundbar model.
- Most soundbars weigh between 3 and 8 pounds, so standard drywall anchors work if you cannot find a stud, but check your soundbar's manual for the exact weight.
- Run power cables behind the wall or along the baseboard before mounting to avoid visible cords across your TV.
- Measure twice before drilling: the soundbar should sit just below or above your TV screen, centered and level.
- If your TV is mounted on the wall, place the soundbar 4 to 6 inches below it; if your TV sits on a stand, a shelf or furniture piece works better than wall mounting.
What you need before you start
Gather these items before you begin: a drill with bits, a level, a tape measure, a stud finder (optional but recommended), the mounting bracket that came with your soundbar, and the correct fasteners. Most soundbars ship with brackets and hardware, so check the box first. If brackets are missing, contact the manufacturer or buy a universal soundbar bracket rated for your soundbar's weight.
You also need to know your soundbar's weight and depth. This information is in the manual or on the manufacturer's website. A typical soundbar weighs 3 to 8 pounds. If yours weighs more than 10 pounds, use a stud or heavy-duty anchors rated for at least that weight.
For wall mounting, decide whether you want to hide the power cable. If yes, you will need a power outlet near the mounting location or a long cable run behind the wall. If you are not comfortable running cables inside walls, plan to route the cable along the baseboard or use a cable cover.
Wall mounting step by step
Start by finding the best location. Hold the soundbar up to the wall below your TV (or above it, depending on your preference) and mark the center point with a pencil. Use a level to make sure the mark is straight. Measure the distance from the center mark to where each bracket hole will go — this distance is in your soundbar's manual or on the bracket itself.
Use a stud finder to locate a wall stud behind your marks. If you find a stud, drill pilot holes directly into it and screw the brackets in. If there is no stud, use heavy-duty drywall anchors. Drill holes at your marked points, insert the anchors, and screw them in until they are flush with the wall. The anchors should be rated for at least your soundbar's weight.
Hang the soundbar on the brackets and tighten all fasteners. Check that it is level and find. If you are running a power cable, do this before mounting: drill a hole behind where the soundbar will sit, feed the cable through, and plug it in at the outlet below. Route the cable down the wall and along the baseboard, or use a cable cover to hide it.
Stand mounting and shelf placement
If you are using a stand, place it on a flat, stable surface in front of your TV or on a nearby shelf. Make sure the surface can support the soundbar's weight without tipping. A stand should sit on a hard floor or a sturdy table, not on carpet or a soft surface that could shift.
If you are placing the soundbar on a shelf, measure the shelf depth to make sure the soundbar fits without hanging over the edge. Leave at least 2 inches of clearance on each side so sound can travel freely. Do not place the soundbar directly on top of your TV or inside an enclosed cabinet, as this blocks the sound.
Route the power cable behind the furniture or along the wall. If the cable is visible, use a cable cover or run it along the baseboard. Plug the soundbar in and test the sound before you finish.
Hiding cables and managing clutter
Visible cables are the most common complaint after mounting. Plan your cable route before you mount the soundbar. If the power outlet is far away, buy a longer cable or an extension cord rated for the soundbar's power draw (usually 30 to 50 watts).
For wall-mounted soundbars, run the cable down the wall and along the baseboard. You can drill a small hole behind the soundbar and feed the cable through the wall if you are comfortable doing so, but this is optional. Stick-on cable covers are cheap and hide cables without drilling.
If your soundbar connects to your TV with an HDMI or optical cable, run that cable along the same path as the power cable. Use cable clips or ties to keep everything bundled and off the floor.
Checking level and adjusting for sound
After mounting, use a level to confirm the soundbar is straight. An unlevel soundbar can affect how sound travels and may look wrong visually. If it is not level, loosen the brackets slightly, adjust the soundbar, and retighten.
Position the soundbar so it points toward your listening area. If it is mounted on a wall, angle it slightly downward if it is above the TV, or slightly upward if it is below. Most soundbars have a fixed angle, but some allow you to tilt the brackets.
Test the sound from your main listening spot — usually the couch. If the sound seems muffled or too quiet, the soundbar may be blocked by furniture or too far from the TV. Move it closer or remove obstacles in front of it.
Common mistakes to avoid
Do not mount the soundbar too high or too low. It should sit at or just below ear level when you are sitting down. If it is too high, sound travels over your head. If it is too low, it can block the TV screen or look awkward.
Do not use anchors that are too small for the soundbar's weight. Check the weight in the manual and buy anchors rated for at least that much. A 6-pound soundbar on a 3-pound anchor will eventually fall.
Do not mount the soundbar inside a cabinet or enclosed space. Sound needs to travel freely. If you must hide it, leave the cabinet doors open or use a soundbar designed for in-wall mounting.
Do not forget to test the connection before you finish. Make sure the soundbar is receiving audio from your TV and that the sound is working. If it is not, check the cable connection or the TV's audio output settings.
Frequently Asked Questions
Can I mount a soundbar above my TV instead of below it?
Yes, but below is usually better. Sound travels downward naturally, so a soundbar below the TV reaches your ears more directly. If you mount it above, angle the brackets to point the sound downward. Make sure the soundbar does not block any vents on top of the TV.
What if I cannot find a stud in the wall?
Use heavy-duty drywall anchors rated for your soundbar's weight. Toggle anchors and molly bolts work well for soundbars up to 10 pounds. For heavier soundbars, use a stud finder to locate a stud, or mount the soundbar on a stand or shelf instead.
Do I need a special bracket for my soundbar?
Most soundbars ship with brackets designed for that model. If yours did not, buy a universal bracket rated for your soundbar's weight and size. Check the manual to see which bracket holes to use.
Can I mount a soundbar on a plaster or concrete wall?
Yes, but the fasteners are different. For plaster, use plaster anchors or find a stud. For concrete, use concrete anchors or a concrete drill bit and fasteners. A stud finder may not work on concrete, so mark your holes carefully and test-drill first.
How far should the soundbar be from the TV?
The soundbar should sit 4 to 6 inches below or above the TV screen, centered and level. It does not need to touch the TV. If your TV is on a stand, a shelf or furniture piece below the TV often works better than wall mounting.