Pairing your LG soundbar and subwoofer happens automatically in most cases
When you unbox a new LG soundbar that comes with a matching subwoofer, the two devices are already paired at the factory. Plug in the soundbar, plug in the subwoofer, turn them both on, and they will find each other within 30 seconds to a minute. You do not need to press buttons or enter codes. If they do not connect on their own, or if you are adding a subwoofer to an existing soundbar, the manual pairing process takes about two minutes and uses either a button on the subwoofer or your TV remote.
The connection between an LG soundbar and subwoofer is wireless and uses a closed frequency that only those two devices use together. This is different from Bluetooth. It is more stable and has less lag, which matters for the bass timing to match the rest of the sound. Once paired, they stay paired even if you turn them off and back on.
Key Takeaways
- Most LG soundbar and subwoofer pairs connect automatically when you power them on for the first time, with no setup required.
- If automatic pairing does not work, hold the pairing button on the back of the subwoofer for three to five seconds until the LED blinks.
- The soundbar and subwoofer use a private wireless connection, not Bluetooth, so they will not interfere with your phone or other devices.
- If pairing still fails after trying the button method, check that both devices are plugged in, within 10 feet of each other, and that the subwoofer LED is not showing an error code.
Automatic pairing when you first turn on the devices
LG ships most soundbar and subwoofer combinations already paired in the factory. When you plug in both devices and turn them on for the first time, they search for each other automatically. The subwoofer LED will blink while it is searching, then turn solid once the connection is made. This usually takes 30 to 60 seconds.
If the LED on the subwoofer stays solid green or blue from the start, pairing is already complete and you are ready to use the system. If the LED blinks for more than two minutes without stopping, or if it turns red, the devices did not find each other and you will need to try manual pairing.
Manual pairing using the subwoofer button
The subwoofer has a small pairing button on the back panel, usually labeled "Pairing" or marked with a wireless symbol. Locate this button before you start. You may need a paperclip or pen to press it, since it sits recessed in the case.
With both the soundbar and subwoofer powered on, press and hold the pairing button on the subwoofer for three to five seconds. Release it. The subwoofer LED will blink rapidly, usually in white or blue. The soundbar will search for the subwoofer during this time. When they connect, the LED will stop blinking and turn solid. This process takes 10 to 30 seconds. If nothing happens after one minute, turn both devices off, wait 10 seconds, turn them back on, and try again.
Pairing using your TV remote or the LG app
Some LG soundbar models let you start pairing from the soundbar menu on your TV remote or through the LG ThinQ app on your phone. Open the soundbar settings, look for an option called "Pairing Mode" or "Connect Subwoofer," and select it. The soundbar will enter pairing mode and wait for the subwoofer to respond. At the same time, press the pairing button on the subwoofer as described above. The two will connect within 30 seconds.
This method is useful if the physical button on the subwoofer is hard to reach or if you want to confirm pairing is working before you move the subwoofer to its final location. Check your soundbar's manual or the LG support website to see if your specific model supports this feature.
Troubleshooting when pairing does not work
If the subwoofer LED blinks red or stays off, the subwoofer is not receiving power. Check that the power cable is plugged in firmly at both the wall outlet and the subwoofer. Wait 30 seconds and try again. If the LED is still off, the subwoofer may have a power issue and you should contact LG support.
If the LED blinks but never turns solid, the soundbar and subwoofer are not finding each other. Move the subwoofer closer to the soundbar — within 10 feet — and try pairing again. Walls, metal objects, and other wireless devices can interfere with the connection at longer distances. Also check that nothing is blocking the back panel of the subwoofer, where the pairing signal transmits from.
If you have paired a different subwoofer to this soundbar before, the soundbar may still be looking for the old one. Reset the soundbar by unplugging it for 30 seconds, then plugging it back in. Once it restarts, try pairing the new subwoofer. If the problem continues, check the soundbar manual for a factory reset option, which will clear all previous pairings.
Replacing a subwoofer or adding one to an older soundbar
If you are replacing a broken subwoofer with a new one, or adding a subwoofer to a soundbar that did not come with one, the pairing process is the same as manual pairing above. The soundbar will forget the old subwoofer automatically once you pair a new one. You do not need to unpair the old one first.
If you are buying a subwoofer separately, make sure it is designed for your soundbar model. LG subwoofers are not always compatible across different soundbar lines. Check the model number on the back of your soundbar and search the LG website to confirm the subwoofer you are buying will work with it. The product page or manual will list compatible subwoofer models.
What to do if the subwoofer is paired but produces no sound
A paired subwoofer that is silent usually means the volume is turned down or the subwoofer is muted. Look for a volume dial or buttons on the back of the subwoofer and turn it up. Some models have a mute button as well — make sure it is not engaged. If the subwoofer has a power-saving mode, it may be in standby and not responding. Press any button on the soundbar remote to wake it up.
If the subwoofer is on and the volume is up but you still hear no bass, check the soundbar settings to make sure the subwoofer output is not turned off. Use your TV remote or the LG app to access the soundbar menu and look for a subwoofer level or subwoofer on/off option. If it is set to off or muted, turn it on. If the subwoofer is still silent after these steps, the pairing may have failed without showing an error. Try the manual pairing process again.
Frequently Asked Questions
Do I need to pair the soundbar and subwoofer every time I turn them on?
No. Once paired, the connection stays saved in both devices. You can turn them off and on as many times as you want, and they will reconnect automatically. You only need to pair them once, or again if you reset one of the devices or replace the subwoofer.
Can I use an LG subwoofer with a different brand of soundbar?
LG subwoofers are designed to work only with LG soundbars. They use a proprietary wireless connection that other brands do not support. If you have a non-LG soundbar, you will need a subwoofer made by that brand or a universal subwoofer that supports multiple pairing methods.
What does it mean if the subwoofer LED is blinking orange or yellow?
The LED color varies by model, but a blinking orange or yellow usually means the subwoofer is in pairing mode and waiting to connect. If it stays blinking for more than two minutes, the pairing has timed out. Turn the subwoofer off and back on, then try pairing again.
Can I pair two subwoofers to one LG soundbar?
Most LG soundbars support only one subwoofer at a time. If you want to add a second subwoofer, check your soundbar manual or contact LG support to confirm your model allows it. Some higher-end models do support dual subwoofers, but the pairing process and setup will be different.
How far apart can the soundbar and subwoofer be?
The subwoofer should be within 30 feet of the soundbar for a stable connection, though pairing works best within 10 feet. The subwoofer does not need to be in the same room as the soundbar once paired, but a very long distance or too many walls between them may cause the connection to drop. If you place the subwoofer far away, test the connection before leaving it there permanently.