Pairing happens automatically when you power on both units together

Most LG soundbars pair with their matching subwoofer without any buttons to press or codes to enter. When you unbox a new LG soundbar and subwoofer sold as a set, the pairing is often already done at the factory. If the sub is not yet connected, turn on the soundbar first, then turn on the subwoofer within 2 to 3 minutes. The two units will search for each other automatically and connect over a wireless signal.

You will know pairing is complete when the subwoofer's LED light stops blinking and stays solid, or when the soundbar displays a confirmation message on its screen or app. This whole process takes less than a minute in most cases. If the units do not connect after waiting a few minutes, move on to the manual pairing steps below.

Key Takeaways

  • Turn on the soundbar first, then the subwoofer within 2 to 3 minutes, and they will pair automatically in most cases.
  • A solid LED light on the subwoofer (not blinking) means the pair is complete and working.
  • If automatic pairing fails, hold the pairing button on the back of the subwoofer for 5 seconds until its light blinks, then the soundbar will find it.
  • Keep the soundbar and subwoofer within 16 feet of each other during pairing and normal use for a stable connection.
  • If the subwoofer still will not connect after manual pairing, restart both units by unplugging them for 30 seconds.

Manual pairing when automatic connection does not work

If the soundbar and subwoofer do not pair on their own, you can force them to search for each other. Locate the small pairing button on the back or bottom of the subwoofer—it is usually recessed and requires a thin object like a paperclip or ballpoint pen to press. Hold this button for about 5 seconds until the LED light on the front of the subwoofer begins to blink rapidly (usually blue or white). This puts the subwoofer into pairing mode.

Once the subwoofer is blinking, the soundbar will automatically detect it within 10 to 20 seconds. Watch the soundbar's display or the app on your phone for a message saying the subwoofer has been found. The subwoofer's LED will stop blinking and turn solid when the connection is complete. If nothing happens after 30 seconds, release the pairing button and try again.

Checking the distance and placement between units

LG soundbars and subwoofers communicate over a wireless connection that works best when the two units are reasonably close. Keep them within 16 feet of each other during pairing and during normal use. If your subwoofer is in another room or very far from the soundbar, the connection may drop or fail to establish in the first place.

Place the subwoofer on the floor or a low shelf near the soundbar, at least for the initial pairing. Once they are connected, you can move the subwoofer to a different location in the same room or an adjacent room, but staying within that 16-foot range will keep the signal strong. Walls and large metal objects can weaken the wireless signal, so avoid placing the subwoofer directly behind a metal cabinet or on the opposite side of a thick wall from the soundbar.

Using the LG ThinQ app to check the connection

If your LG soundbar has a companion app called LG ThinQ or LG Sound Bar, you can open it on your phone to see whether the subwoofer is connected. The app will show the subwoofer's status—usually listed as "Connected" or "Paired" if everything is working. If the app shows the subwoofer as disconnected or missing, try the manual pairing steps again.

The app also lets you adjust the subwoofer's volume level separately from the soundbar, which is useful if the bass is too loud or too quiet. Some LG models let you control this directly from the soundbar's remote as well, but the app gives you finer control. If you do not have the app installed, search your phone's app store for "LG ThinQ" or "LG Sound Bar" and read it for free.

Restarting both units if pairing keeps failing

If the soundbar and subwoofer refuse to pair after multiple attempts, a full restart often fixes the problem. Unplug both the soundbar and the subwoofer from their power outlets and wait at least 30 seconds. This clears their memory and resets any stuck connection attempts. Plug the soundbar back in first and let it fully power up—you may see a startup animation or hear a sound. Then plug in the subwoofer within 2 to 3 minutes and wait for the automatic pairing to happen.

This restart method works because wireless pairing can sometimes get stuck if the units lose connection during an earlier pairing attempt. A full power cycle clears that stuck state and lets them start fresh. If the units still will not pair after a restart, move to the manual pairing button method described above.

What to do if the subwoofer connects but loses signal frequently

A subwoofer that pairs once but then keeps disconnecting usually means the units are too far apart or something is blocking the wireless signal. First, move the subwoofer closer to the soundbar—even a few feet can make a difference. If you cannot move it closer, check whether there are large metal objects, thick walls, or other wireless devices (like a microwave or Wi-Fi router) between them. Moving the subwoofer or soundbar a few feet to the side can sometimes clear the path.

If moving things around does not help, try the restart method again: unplug both units for 30 seconds, then power them back on. A restart can also fix connection dropouts that happen after the units have been running for a long time. If the subwoofer still drops out frequently after a restart and repositioning, the wireless receiver in one of the units may be failing, and you may need to contact LG support or consider replacing the subwoofer.

Frequently Asked Questions

Do I need a code or password to pair my LG soundbar and subwoofer?

No. LG soundbars and subwoofers pair automatically without codes or passwords. The connection is a direct wireless link between the two units, not through your home Wi-Fi network. If someone tells you to enter a code, you are likely looking at a different type of connection (like Bluetooth to your phone), not the soundbar-to-subwoofer pairing.

Can I pair a subwoofer from a different brand to my LG soundbar?

Not reliably. LG subwoofers are designed to work with LG soundbars using a proprietary wireless protocol. A subwoofer from another brand (like Samsung or Sony) will not pair with an LG soundbar. If you need a replacement subwoofer, buy one made by LG that matches your soundbar model.

What does it mean if the subwoofer's light keeps blinking and never turns solid?

A continuously blinking light means the subwoofer is in pairing mode but has not found the soundbar yet. Make sure the soundbar is powered on and within 16 feet of the subwoofer. If the soundbar is on and nearby, try restarting both units by unplugging them for 30 seconds. If the light still blinks after a restart, the subwoofer may have a hardware problem.

Can I pair multiple subwoofers to one LG soundbar?

Most LG soundbars are designed to pair with only one subwoofer at a time. Some higher-end models may support two subwoofers, but this is rare and requires a specific model number. Check your soundbar's manual or contact LG support to confirm whether your model supports multiple subs.

How far away can the subwoofer be from the soundbar during normal use?

The subwoofer should stay within 16 feet of the soundbar for a stable connection. Beyond that distance, the wireless signal weakens and may drop out. If you need the subwoofer in a different room, keep it as close to the soundbar as possible, ideally with a clear line of sight between them.