The basic pairing process for Samsung soundbars

Most Samsung soundbars connect to your TV through a single HDMI cable or optical audio cable, which handles both the video signal and sound in one connection. Some models also support wireless pairing via Bluetooth or Wi-Fi. The exact steps depend on which connection method your soundbar and TV support, but the goal is the same: telling your TV to send its audio to the soundbar instead of its built-in speakers.

Before you start, locate the power cable, remote, and any cables that came in the box with your soundbar. Check your TV's manual or the back panel to see which audio output ports it has — most modern TVs have at least one HDMI port and often an optical audio port (a small square opening with a hinged cover). Knowing what your TV offers narrows down which connection method will work.

Key Takeaways

  • HDMI eARC is the fastest connection method if your TV and soundbar both support it, because it sends audio and video through one cable and lets you control the soundbar with your TV remote.
  • Optical audio cables work with almost all TVs and soundbars and require no setup beyond plugging in the cable and selecting the right input on the soundbar.
  • Bluetooth pairing is wireless but works best for phones and tablets; it may not stay connected to your TV automatically when you turn the TV back on.
  • After connecting, you must tell your TV to send sound to the soundbar instead of its own speakers — this step is in your TV's audio or sound settings menu.
  • If sound does not come through after pairing, check that the soundbar input is set to the port you plugged the cable into, and that your TV's audio output is not muted.

Connecting via HDMI eARC (the easiest wired method)

HDMI eARC is a single cable that carries both picture and sound from your TV to the soundbar. Not all TVs and soundbars support it, so check your manuals first. If both devices have an eARC port (usually labeled on the back), this is the simplest route because you use one cable instead of two, and your TV remote often controls the soundbar volume automatically.

Plug one end of the HDMI cable into the eARC port on your TV and the other end into the eARC port on your soundbar. Power on both devices. On your TV, go to Settings > Sound or Audio, then look for an option called "Sound Output," "Audio Output," or "Speaker Settings." Select "Soundbar" or "External Speaker" from the list. Your TV should now send all sound to the soundbar. Test it by turning up the volume on your TV remote — you should hear the soundbar respond.

If you do not see an eARC option in your TV settings, your TV may not support it, or the port may not be enabled. Check your TV manual to confirm which HDMI port is the eARC port — it is not always the same port number across different brands.

Connecting via optical audio cable (works with almost all TVs)

An optical audio cable (also called a TOSLINK cable) is a thin cord with a small square connector on each end. It carries sound only, not video, so you still need your TV connected to the soundbar by HDMI for picture if you want to use the soundbar as a display hub. However, optical is reliable and works with nearly every TV and soundbar made in the last ten years.

Locate the optical audio output port on your TV — it is usually on the back or side and has a small hinged cover. Open the cover and insert one end of the optical cable. Plug the other end into the optical input port on the back of your soundbar. Power on the soundbar and your TV. On the soundbar, press the Input or Source button on the remote until the display shows "Optical" or "D.In" (digital input). On your TV, go to Settings > Sound or Audio and select "Optical," "External Speaker," or "Soundbar" as the audio output.

Optical cables are directional — the end that goes into your TV is different from the end that goes into the soundbar, so they only fit one way. If a cable does not slide in smoothly, do not force it; you may have the wrong end or the wrong port.

Pairing your Samsung soundbar with a phone or tablet via Bluetooth

If you want to play music or podcasts from your phone through the soundbar without turning on your TV, Bluetooth pairing lets you do that. On your soundbar remote, press the Bluetooth or Source button until the display shows "Bluetooth" or "BT." The soundbar will enter pairing mode, usually signaled by a blinking light on the front panel.

On your phone or tablet, go to Settings > Bluetooth and turn Bluetooth on. Your phone will scan for nearby devices. Look for your soundbar model name in the list (for example, "Samsung HW-Q60B") and tap it. Your phone will confirm the pairing. Once connected, any audio from your phone — music apps, videos, calls — will play through the soundbar.

Bluetooth pairing is convenient but has limits. The connection may drop if you move your phone too far from the soundbar (usually beyond 30 feet), and it does not automatically reconnect when you turn your TV back on. If you want to watch TV and then switch to your phone, you may need to manually select Bluetooth on the soundbar again. For regular TV watching, a wired connection is more reliable.

Switching between inputs if you have multiple devices

If you have both a TV connected via HDMI and a phone connected via Bluetooth, your soundbar can only play one source at a time. To switch between them, press the Input or Source button on the soundbar remote and select which device you want to hear — "HDMI," "Optical," "Bluetooth," or "Aux," depending on what you have plugged in.

Some Samsung soundbars have a feature that automatically switches to the input that is actively sending sound, so you do not have to change it manually. Check your soundbar manual to see if yours has this feature and how to turn it on. If it does not, you will need to press the Input button each time you switch from TV to phone or vice versa.

Troubleshooting when sound does not come through

If you have plugged in the cable and paired the devices but hear nothing, start with the simplest checks. Make sure the soundbar is powered on — look for a light on the front panel. Check that the volume on the soundbar is not set to zero; press the Volume Up button on the remote a few times. Confirm that the soundbar input is set to the port you actually used — if you plugged in an optical cable, the soundbar display should show "Optical," not "HDMI" or "Bluetooth."

Next, check your TV. Go to Settings > Sound or Audio and verify that the audio output is set to "Soundbar," "External Speaker," or the name of your soundbar model — not "TV Speaker" or "Internal Speaker." If your TV has a mute button on the remote, press it to unmute. Some TVs also have a separate audio output mute in the settings menu.

If you still hear nothing, try unplugging the soundbar for 30 seconds, then plugging it back in. This resets the device and often clears connection problems. If the soundbar has a reset button (usually a small hole on the back), you can hold a paperclip in it for 10 seconds to perform a full reset, though this will erase all your settings and Bluetooth pairings.

If sound comes through the TV speakers instead of the soundbar, your TV may not recognize the soundbar as an audio output. Unplug the cable, wait 10 seconds, and plug it back in. Then go back to your TV's audio settings and select the soundbar again. If the problem persists, the cable may be damaged — try a different HDMI or optical cable if you have one available.

Controlling your soundbar with your TV remote

Many Samsung soundbars support a feature called HDMI CEC (Consumer Electronics Control), which lets your TV remote control the soundbar's volume and power without any extra setup. If you connected via HDMI eARC and this feature is enabled, pressing the volume buttons on your TV remote will adjust the soundbar volume instead of the TV's internal speakers.

If your TV remote does not control the soundbar, HDMI CEC may be turned off. On your TV, go to Settings > General or Settings > System and look for an option called "HDMI CEC," "Anynet+," "Bravia Sync," or "EasyLink" (the name varies by TV brand). Turn it on. On your soundbar, check the manual to see if there is a CEC setting you need to enable as well. Once both devices have CEC turned on, your TV remote should control the soundbar.

If you prefer to use the soundbar remote instead, that works just as well — you will straightforward have two remotes on your coffee table. Some people keep the soundbar remote in a drawer and only use the TV remote for convenience.

Frequently Asked Questions

Do I need both an HDMI cable and an optical cable, or just one?

You only need one. If you use HDMI eARC, that single cable carries both picture and sound. If your TV does not support eARC, use either HDMI (for picture only, if you want the soundbar to act as a display hub) or optical (for sound only). Most people choose one method and stick with it.

Can I use the soundbar with my TV and my phone at the same time?

No, the soundbar can only play one source at a time. You will need to press the Input button on the soundbar remote to switch between your TV and your phone. Some newer models can switch automatically if they detect sound coming from a different device, but you will need to check your manual to see if yours has this feature.

Why does my Bluetooth connection keep dropping?

Bluetooth has a limited range, usually around 30 feet, and can be disrupted by walls, metal objects, or other wireless devices like microwaves. If your phone is far from the soundbar or in another room, the connection may drop. Move closer to the soundbar or use a wired connection to your TV instead for more reliable sound.

What should I do if my TV does not have an optical port?

Newer TVs often skip the optical port in favor of HDMI eARC. If your TV has HDMI eARC, use that. If it does not have either port, you may need a separate audio receiver or adapter, or you can connect your soundbar directly to your cable box or streaming device instead of your TV. Check your soundbar manual for all available input options.

Will the soundbar stay connected to my TV when I turn it off and back on?

Yes, wired connections (HDMI and optical) stay connected permanently once set up. Bluetooth connections may drop when you turn off your TV, and you may need to manually reconnect your phone the next time you want to use it. This is one reason wired connections are preferred for regular TV watching.