Connect Your Subwoofer Using Bluetooth or HDMI

Most Sony soundbars pair with their matching subwoofers through Bluetooth, which is the simplest method for most setups. Some models also support HDMI eARC or a wired connection. The exact steps depend on your soundbar model, but the process takes about five minutes and requires no tools or special knowledge.

Before you start, make sure both the soundbar and subwoofer are powered on and within 10 feet of each other. Check that your soundbar's manual lists the subwoofer model you own — Sony makes several subwoofer lines, and not all pair with every soundbar. If you're unsure, look up your soundbar's model number on Sony's website to find the compatible subwoofer list.

Key Takeaways

  • Most Sony soundbars connect to subwoofers via Bluetooth, which pairs automatically or through a pairing button on the back of each device.
  • Keep the soundbar and subwoofer within 10 feet during pairing, and make sure both are powered on before you begin.
  • If Bluetooth pairing fails, try moving the devices closer together, restarting both units, or checking your soundbar's manual for a reset procedure.
  • Some Sony soundbars use HDMI eARC instead of Bluetooth, so confirm your model's connection method before troubleshooting.

Pairing via Bluetooth on Most Sony Models

On most Sony soundbars, the subwoofer pairs automatically when you turn both devices on for the first time. Look for a small pairing button on the back or bottom of the subwoofer — it's usually recessed and requires a paperclip or pen to press. Press and hold this button for three to five seconds until you see a light blink on the subwoofer, which signals it's in pairing mode.

Next, check your soundbar for a pairing button or menu option. Many Sony soundbars have a button labeled "Pairing" or "Connect" on the remote or the device itself. Press it while the subwoofer is blinking. The two devices should connect within 30 seconds, and the subwoofer's light will stop blinking and turn solid or go dark, depending on the model.

If the light on the subwoofer stays blinking after one minute, the pairing failed. Move the subwoofer closer to the soundbar — sometimes a wall or metal object between them blocks the signal — and try again. If it still doesn't work, restart both devices by unplugging them for 10 seconds, plugging them back in, and repeating the pairing steps.

Using Your Soundbar's Menu to Connect

Some Sony soundbars require you to pair through the settings menu instead of a physical button. Use your remote to navigate to Settings or Setup, then look for an option labeled "Subwoofer," "Pairing," or "Bluetooth Devices." Select it and choose "Pair New Device" or similar wording.

While the soundbar is searching for devices, press the pairing button on the subwoofer's back. The soundbar should detect it within 30 seconds and display the subwoofer's name on screen. Select it to complete the connection. Once paired, the subwoofer should appear in your soundbar's settings as a connected device, and you won't need to pair it again unless you reset one of the devices.

Checking Your Connection and Sound Settings

After pairing, play music or a movie through your soundbar to confirm the subwoofer is working. You should hear bass from the subwoofer when low frequencies play — explosions in movies, drum kicks in music, or deep rumbling sounds. If you hear nothing from the subwoofer, check that it's powered on and that the volume isn't turned all the way down.

Most Sony soundbars have a subwoofer volume control in the settings menu or on the remote. If the bass is too loud or too quiet, adjust this setting rather than the main soundbar volume. Look for a label like "Sub Level," "Subwoofer Volume," or "Bass" in your soundbar's menu. Start at the middle setting and adjust up or down based on what sounds right to you.

Troubleshooting When Pairing Doesn't Work

If the subwoofer won't pair after multiple attempts, try a factory reset on both devices. For the subwoofer, press and hold the pairing button for 10 to 15 seconds until the light flashes rapidly, then release. For the soundbar, check your manual for the reset procedure — it often involves holding a specific button combination or accessing a reset option in the settings menu.

After resetting, wait 30 seconds, then power both devices off and back on. Attempt pairing again from the beginning. If the subwoofer still won't connect, check that your soundbar model actually supports that subwoofer. Visit Sony's support website, enter your soundbar's model number, and look at the compatible accessories list. If your subwoofer isn't listed, it may not be designed to work with that soundbar.

Another common issue is interference from other Bluetooth devices. If you have a phone, tablet, or laptop nearby, move them away from the soundbar during pairing. Bluetooth signals can overlap, especially in crowded wireless environments. Once the subwoofer is paired, interference is less likely to cause problems, but it's still worth keeping other devices at a distance during the initial setup.

HDMI eARC Connection for Certain Sony Models

Some newer Sony soundbars use HDMI eARC to connect to a subwoofer instead of Bluetooth. This method sends audio and control signals through a single HDMI cable, which can be more stable than wireless pairing. Check your soundbar's manual to see if it supports HDMI eARC — if it does, you'll need an HDMI cable rated for eARC and a compatible Sony subwoofer.

To set up HDMI eARC, connect one end of the HDMI cable to the subwoofer's HDMI input and the other end to the soundbar's HDMI eARC port. The port is usually labeled "eARC" or "ARC." Power on both devices, and they should recognize each other automatically. If they don't, check your soundbar's settings menu for an option to enable eARC or subwoofer connection, then restart both devices.

Frequently Asked Questions

Why is my subwoofer not making any sound?

First, check that the subwoofer is powered on — look for a light on the back or front. Then verify it's paired by looking at your soundbar's settings or checking for a solid light on the subwoofer. If it's paired but silent, the subwoofer volume may be turned down. Access your soundbar's menu and raise the subwoofer level setting. If it's already at a normal level, try playing a movie or music with heavy bass to confirm the subwoofer is working.

Can I pair a Sony subwoofer with a different brand soundbar?

Most Sony subwoofers are designed to work only with Sony soundbars. While some older models may pair via standard Bluetooth, Sony's newer subwoofers use proprietary pairing that locks them to Sony devices. Check your subwoofer's manual to confirm compatibility. If you want to use a different brand soundbar, you may need a subwoofer made by that brand instead.

How far away can the subwoofer be from the soundbar?

During pairing, keep the subwoofer within 10 feet of the soundbar. Once paired, most Sony subwoofers work reliably at distances up to 30 feet, though walls and metal objects can reduce the range. If your subwoofer loses connection frequently, try moving it closer to the soundbar or removing obstacles between them.

Do I need to pair the subwoofer every time I turn on my soundbar?

No. Once paired, the subwoofer should reconnect automatically when you power on both devices. If it doesn't reconnect after 30 seconds, try turning the subwoofer off and back on. If it still won't connect, you may need to reset and re-pair both devices.

What if my soundbar and subwoofer are different Sony models?

Check Sony's website or your soundbar's manual to confirm the subwoofer model is compatible. Not all Sony subwoofers work with all Sony soundbars. If your subwoofer isn't listed as compatible, pairing may fail or the devices may not work together properly even if they do pair.