The basic pairing process for Samsung soundbars

Most Samsung soundbars connect via Bluetooth, which means you turn on the soundbar's pairing mode, then search for it from your phone or device and select it. The soundbar will remember that device the next time you turn both on. The exact steps depend on whether your soundbar has a physical pairing button, a remote control, or a companion app — but the end result is the same.

Before you start, make sure your soundbar is plugged in and powered on. Have your phone or device within 10 feet of the soundbar. If the soundbar has been paired to another device recently, unpair it first or straightforward forget the soundbar from that device's Bluetooth settings to avoid connection conflicts.

Key Takeaways

  • Most Samsung soundbars enter pairing mode by holding the Bluetooth button on the remote or soundbar itself for three to five seconds until a light blinks.
  • On your phone, go to Bluetooth settings, look for the soundbar's model name in the available devices list, and tap it to connect.
  • Once paired, the soundbar will automatically connect to that device when both are turned on and in range.
  • If pairing fails, restart both the soundbar and your phone, then try again from the beginning.
  • Some Samsung soundbars also support Wi-Fi connection through the SmartThings app for streaming music services and firmware updates.

Pairing using the remote control button

If your Samsung soundbar came with a remote, look for a button labeled "Bluetooth" or a symbol that looks like a Bluetooth logo (two overlapping triangles). Press and hold this button for three to five seconds. The soundbar will emit a beep or the front display will show a blinking light, indicating it is now in pairing mode and ready to accept a connection.

Once the soundbar is in pairing mode, pick up your phone or tablet. Open the Bluetooth settings — on Android, this is usually under Settings > Connected Devices > Bluetooth; on iPhone, it is Settings > Bluetooth. Wait a few seconds for your soundbar to appear in the list of available devices. It will show up under its model name, such as "Samsung HW-Q60B" or "Samsung HW-S800T". Tap the soundbar name to connect.

Your phone will either connect when ready or ask you to confirm the pairing. Once connected, you should see "Connected" or a checkmark next to the soundbar name in your Bluetooth settings. The soundbar will also emit a second beep to confirm the pairing is complete.

Pairing using the physical button on the soundbar

Some Samsung soundbar models have a dedicated Bluetooth button on the soundbar itself rather than relying on the remote. This button is usually located on the top or back of the unit and may be labeled "Bluetooth" or marked with the Bluetooth symbol. Press and hold this button for three to five seconds until you see a light blink or hear a beep.

From this point, the pairing process is identical to the remote method: open your phone's Bluetooth settings, wait for the soundbar to appear in the available devices list, and tap it to connect. The soundbar will confirm the connection with a beep or light indicator.

Connecting through the SmartThings app

Samsung soundbars that support Wi-Fi can also be set up and controlled through the SmartThings app, which is available for both Android and iPhone. This method is useful if you want to use music streaming services like Spotify or Deezer directly through the soundbar, or if you need to update the soundbar's firmware.

read the SmartThings app from the Google Play Store or Apple App Store. Open the app and tap the plus icon to add a new device. Select "Soundbar" from the device category list. The app will search for your soundbar on your home Wi-Fi network. When it finds your soundbar, tap it to connect. You may be asked to confirm the connection on the soundbar itself or enter your Wi-Fi password.

Once connected through SmartThings, you can control volume, input source, and sound modes from your phone, and you can also set up voice control if your soundbar supports it. SmartThings connection does not replace Bluetooth pairing — you can use both at the same time.

What to do if the soundbar will not pair

If your soundbar does not appear in your phone's Bluetooth list after you have held the pairing button, restart both devices. Turn off the soundbar completely, wait 10 seconds, and turn it back on. Then restart your phone. Once both devices have restarted, try the pairing process again from the beginning.

If the soundbar still does not appear, check whether it is already paired to another device. Many soundbars can only maintain one active Bluetooth connection at a time. Go to that other device's Bluetooth settings and either disconnect the soundbar or "forget" it entirely. Then return to your phone and try pairing again.

If you have tried restarting and unpairing from other devices and the soundbar still will not show up, perform a factory reset on the soundbar. The method varies by model — some have a reset button on the back, while others require you to hold the power button for 10 seconds. Check your soundbar's manual or Samsung's support website for the exact reset procedure for your model. After a factory reset, the soundbar will enter pairing mode automatically.

Switching the soundbar between devices

Once your Samsung soundbar is paired to a device, it will automatically connect to that device whenever both are turned on and in Bluetooth range. If you want to use the soundbar with a different phone or tablet, you have two options.

The simplest method is to disconnect the soundbar from the first device's Bluetooth settings and then pair it to the new device using the same pairing button process described above. The soundbar will remember both devices, so the next time you turn on the first device near the soundbar, it may try to reconnect to that one instead. To prevent this, go into the first device's Bluetooth settings and select "Forget" next to the soundbar name.

Alternatively, if both devices are nearby, you can manually select which device the soundbar connects to by opening that device's Bluetooth settings and tapping the soundbar name. The soundbar will disconnect from the other device and connect to the one you selected.

Frequently Asked Questions

How far away can my phone be from the soundbar and still stay connected?

Bluetooth typically works reliably within 30 feet of the soundbar, though walls and other obstacles can reduce this range. If you move beyond 30 feet or the connection drops, move closer to the soundbar and reconnect. Most soundbars will automatically reconnect when you come back into range.

Can I pair multiple phones to the same soundbar at the same time?

No. Most Samsung soundbars maintain only one active Bluetooth connection at a time. However, the soundbar can remember multiple paired devices and will connect to whichever one is closest or was used most recently. To switch between devices, disconnect from one and connect from another using your Bluetooth settings.

Why does my soundbar keep disconnecting from my phone?

This usually happens if another device is trying to connect to the soundbar, if the soundbar is too far away, or if there is interference from other wireless devices. Try moving closer to the soundbar, turning off Bluetooth on other nearby devices, and restarting both the soundbar and your phone. If the problem persists, perform a factory reset on the soundbar.

Do I need to pair my soundbar every time I turn it on?

No. Once paired, the soundbar will automatically connect to your phone when you turn both on and they are in range. You only need to pair once, unless you reset the soundbar or want to connect it to a different device.

Can I use both Bluetooth and Wi-Fi on my Samsung soundbar at the same time?

Yes. You can pair the soundbar via Bluetooth for phone calls and notifications while also connecting it to Wi-Fi through the SmartThings app for music streaming and firmware updates. Both connections can be active without interfering with each other.