Connect Your Vizio Soundbar in Three Steps
Most Vizio soundbars connect to your TV using a single cable and then pair wirelessly to your remote. The whole process takes about five minutes. You'll plug the soundbar into power, run an audio cable from your TV to the soundbar, and then use your TV remote to tell the soundbar it's connected. After that, your TV remote controls both the TV and the soundbar volume together.
The exact steps depend on which Vizio soundbar model you own and which TV you're connecting it to, but the basic principle is the same across all of them: the soundbar needs power, an audio signal from your TV, and a moment to recognize that signal.
Key Takeaways
- Vizio soundbars connect to your TV using either an HDMI cable, optical cable, or 3.5mm audio cable, depending on your TV's ports and soundbar model.
- After plugging in the cable, turn on the soundbar and TV, then select the correct input on the soundbar using its remote or buttons.
- Your TV remote will control the soundbar volume automatically if your TV supports HDMI CEC, a feature that links devices together.
- If sound doesn't come through, check that the TV's audio output is set to the correct port and that the soundbar input matches the cable you used.
Gather the Right Cable for Your Setup
Before you plug anything in, identify which audio cable your TV has available. Look at the back or side of your TV for one of these three ports: an HDMI port (a flat rectangular slot, often labeled HDMI ARC or eARC), an optical port (a small square opening with a hinged cover), or a 3.5mm audio jack (a small round hole, like a headphone jack).
Most newer Vizio soundbars come with an HDMI cable in the box. If your TV has an HDMI ARC or eARC port, use that—it's the easiest connection because it carries both video and audio, and it lets your TV remote control the soundbar volume. If your TV doesn't have HDMI ARC, check whether it has an optical port. If it has neither, you'll need a 3.5mm cable, which you may need to buy separately.
Check your soundbar's manual or the back of the unit to see which ports it has. Most Vizio soundbars have at least one of these three options. If you're unsure which cable came in your box, the manual that came with the soundbar will show you.
Connect the Soundbar to Power and Your TV
Plug the soundbar into a wall outlet or power strip. You should see a light turn on—usually a small LED on the front of the unit. This light tells you the soundbar has power. Leave the soundbar off for now; you'll turn it on in the next step.
Take the audio cable you identified and plug one end into your TV's audio output port. If you're using HDMI, plug it into the HDMI ARC or eARC port on your TV. If you're using optical, plug it into the optical port. If you're using a 3.5mm cable, plug it into the audio jack. Then plug the other end of the cable into the matching port on the back of the soundbar.
Double-check that both ends of the cable are fully seated—you should hear or feel a small click. A loose connection is the most common reason sound doesn't come through.
Turn On the Soundbar and Select the Input
Turn on your TV first, then turn on the soundbar. You can usually do this by pressing the power button on the soundbar itself or on its remote. Once both are on, the soundbar needs to know which input to listen to.
Pick up the soundbar remote and look for a button labeled Input, Source, or HDMI. Press it repeatedly until the display on the soundbar shows the input that matches the cable you plugged in. If you used HDMI, select HDMI. If you used optical, select Optical. If you used 3.5mm, select Aux or Line In. The soundbar remote should have a small display or LED that shows which input is active.
Once you've selected the right input, play something on your TV—a streaming app, a cable channel, or a movie. You should hear sound come from the soundbar. If you don't, move to the troubleshooting section below.
Set Your TV to Send Audio to the Soundbar
On your TV remote, find the menu or settings button (usually labeled Menu, Settings, or Home). Navigate to Audio or Sound settings. Look for an option called Audio Output, Speaker Output, or Sound Out. Change this setting from "TV Speaker" or "Internal Speaker" to the port you plugged the soundbar into. If you used HDMI ARC, select "HDMI ARC" or "External Speaker". If you used optical, select "Optical" or "Digital Out". If you used 3.5mm, select "Headphone Jack" or "Line Out".
Save the change and exit the menu. Now when you play something on your TV, the sound should go to the soundbar instead of the TV's built-in speakers. You can test this by turning up the volume on your TV remote—the soundbar should get louder.
Enable HDMI CEC So Your TV Remote Controls Volume
If you used an HDMI ARC cable, your TV and soundbar can communicate with each other through a feature called HDMI CEC (Consumer Electronics Control). This lets you use your TV remote to control the soundbar volume without needing two remotes.
On your TV, go back to Settings and look for an option called HDMI CEC, CEC, Simplink, Anynet+, or EasyLink—the name varies by TV brand. Turn this feature on. Then test it: use your TV remote to adjust the volume. You should see the soundbar volume change on the soundbar's display. If it works, you're done—you can put the soundbar remote away.
If HDMI CEC doesn't work or your TV doesn't have this feature, you'll need to use the soundbar remote to adjust soundbar volume and the TV remote to adjust TV volume. This is normal and not a problem.
Troubleshooting When Sound Doesn't Come Through
If you've followed all the steps and still hear nothing from the soundbar, start with the simplest checks. Make sure the soundbar is powered on—look for a light on the front. Make sure the cable is fully plugged into both the TV and the soundbar. Make sure the soundbar input matches the cable you used.
Next, check your TV's audio output settings again. Go back to Settings > Audio or Sound and confirm that the audio output is set to the port you're using, not to the TV speaker. If the setting says "TV Speaker" or "Internal Speaker", the TV is still sending sound to itself instead of the soundbar.
If you're using HDMI ARC, try unplugging the HDMI cable from both devices, waiting 10 seconds, and plugging it back in. Sometimes the connection needs to be reset. If you're using optical or 3.5mm, try a different cable if you have one available—the cable itself may be damaged.
If sound still doesn't work after these checks, the soundbar may need a factory reset. Unplug it from power for 30 seconds, then plug it back in. This clears any settings that might be causing the problem. Once it powers back on, select the input again and test.
Frequently Asked Questions
Do I need the Vizio soundbar remote to use it?
No. If you set up HDMI CEC correctly, your TV remote controls everything. The soundbar remote is optional and useful only if you want to adjust soundbar settings without using your TV menu. Most people use just the TV remote after setup.
Can I connect the soundbar wirelessly instead of with a cable?
Some Vizio soundbars have Bluetooth, but Bluetooth is not reliable for TV audio because the connection can drop or lag. Always use a wired cable (HDMI, optical, or 3.5mm) for your main TV connection. Bluetooth is better for playing music from your phone or tablet.
What if my TV doesn't have HDMI ARC or optical?
Use a 3.5mm audio cable instead. This works with almost any TV. The only downside is that your TV remote won't control the soundbar volume—you'll need the soundbar remote. But the sound quality is the same.
Why is the soundbar volume so quiet even when it's turned all the way up?
Check that your TV's volume is also turned up. If your TV is set to a low volume, the soundbar can only play as loud as the TV sends it. Turn up both the TV volume and the soundbar volume. Also check that the TV's audio output is actually going to the soundbar and not split between the soundbar and the TV speaker.
Can I use the soundbar with multiple devices like a cable box and a streaming device?
Yes. If both devices are connected to your TV (not directly to the soundbar), the soundbar will play audio from whichever device your TV is currently showing. You don't need to change any soundbar settings when you switch between devices—just change the input on your TV.