Connect the subwoofer to power and wait for the pairing mode

Your Vizio subwoofer pairs to the soundbar wirelessly using a built-in connection protocol — you do not need to plug anything into the soundbar itself. Start by plugging the subwoofer into a power outlet. The sub will take 10 to 15 seconds to power on. You will see a light on the back or bottom of the unit turn on, usually blue or white.

Once the sub is powered, look for a small button on the back or underside labeled Pairing, Connect, or Pair. Press and hold this button for 3 to 5 seconds until you see the light on the sub begin to blink. A blinking light means the sub is now in pairing mode and searching for the soundbar. Leave the sub in this state — do not unplug it or press the button again.

Put your soundbar into pairing mode

While the sub is blinking and waiting, turn your attention to the soundbar. On the back or bottom of the soundbar, locate the same Pairing or Connect button. Press and hold it for 3 to 5 seconds. The soundbar will emit a tone or flash a light to signal it has entered pairing mode. Some Vizio soundbars will display a message on your TV screen saying "Pairing" or "Searching for subwoofer."

The soundbar and sub will now search for each other. This usually takes 30 seconds to 2 minutes. During this time, keep both units plugged in and do not press any buttons. If you hear a second tone from the soundbar or see a steady light (not blinking) on the sub, the pairing was successful. The sub light will typically turn solid blue or white once connected.

Key Takeaways

  • Power on the subwoofer first, then press its pairing button until the light blinks.
  • Press the soundbar's pairing button while the sub is still blinking to start the connection.
  • Wait 30 seconds to 2 minutes without touching either unit — a solid light on the sub means pairing succeeded.
  • If pairing fails, unplug both units for 30 seconds, then repeat the process starting with the subwoofer.
  • The soundbar and sub must be within 30 feet of each other during pairing, though they can be farther apart once connected.

Test the subwoofer connection with sound

Once the pairing light stops blinking and turns solid, play audio through your soundbar to confirm the sub is working. Turn up the volume on your TV or audio source and listen for bass coming from the subwoofer — you should hear low frequencies like explosions, music bass lines, or rumbling in movies. If you hear nothing from the sub but the soundbar is playing, the pairing may not have completed.

Check that the subwoofer's volume dial is not turned all the way down. Most Vizio subs have a volume knob on the back. Turn it to the middle position (around 12 o'clock) and test again. If you still hear no bass, move to the troubleshooting section below.

What to do if pairing fails the first time

If the subwoofer light never stops blinking, or if the soundbar does not emit a tone after you press its pairing button, the units did not connect. Unplug both the soundbar and subwoofer from their power outlets. Wait 30 seconds, then plug them back in. Start the pairing process again from the beginning — power the sub first, press its pairing button, then press the soundbar's pairing button.

Make sure both units are in the same room and within 30 feet of each other during pairing. Walls, metal objects, and other wireless devices (like routers or microwaves) can interfere with the connection. If you are pairing near a microwave or Wi-Fi router, move the sub and soundbar to a different location and try again. Also check that you are pressing the correct button — some Vizio models have a power button and a pairing button very close together, so press slowly and deliberately.

Adjust subwoofer volume after pairing

Once the sub is paired and producing sound, you may want to adjust how loud the bass is. Most Vizio subwoofers have a volume dial on the back labeled Level or Volume. Start at the middle position (12 o'clock). Play a movie or music with heavy bass and listen to whether the sub is too loud, too quiet, or balanced with the soundbar.

If the bass is overpowering and drowns out dialogue, turn the dial down toward 7 o'clock. If the bass is barely noticeable, turn the dial up toward 5 o'clock. There is no single correct setting — it depends on your room size, how far the sub is from your seating area, and your personal preference. Make small adjustments (a quarter turn at a time) and test with different content before making another change.

Reconnect the subwoofer if it loses connection

If the sub was working but suddenly stops producing sound, it may have lost its wireless connection to the soundbar. This can happen if the sub is unplugged, moved too far away, or if there is a power surge. The quickest fix is to unplug the subwoofer for 10 seconds, then plug it back in. The sub should automatically reconnect to the soundbar within 30 seconds — you will see the light turn solid again.

If automatic reconnection does not work, repeat the full pairing process: press the sub's pairing button until it blinks, then press the soundbar's pairing button. This manual re-pairing usually takes less than a minute and will restore the connection. After reconnecting, test with audio to confirm the sub is producing bass again.

Frequently Asked Questions

Do I need to use the Vizio remote to pair the soundbar and sub?

No. The pairing happens through physical buttons on the units themselves, not through the remote control. You only need the remote to control volume and input after pairing is complete. If your remote is lost or not working, you can still pair the soundbar and sub using just the buttons on the back of each unit.

Can I pair the subwoofer to a different Vizio soundbar?

Yes, but you will need to unpair it from the old soundbar first. Press and hold the sub's pairing button for 10 seconds (longer than the normal 3 to 5 seconds) until the light blinks rapidly or changes color. This clears the old pairing. Then follow the normal pairing steps with the new soundbar. If you skip the unpair step, the sub may try to connect to the old soundbar instead.

How far can the subwoofer be from the soundbar?

During pairing, keep them within 30 feet and in the same room. Once paired and connected, the sub can be farther away — many users place subs in a corner or behind furniture. However, the farther the sub is from the soundbar, the weaker the wireless signal. If the sub keeps disconnecting, try moving it closer to the soundbar or removing large metal objects between them.

What if the subwoofer light never turns solid, even after waiting two minutes?

The pairing did not complete. Unplug both units for 30 seconds and try again. If it still fails, check that you are pressing the pairing button (not the power button) and holding it long enough. Some Vizio models require a 5-second hold. If the button is hard to find, consult your soundbar's manual — the pairing button location varies by model.

Can I use a non-Vizio subwoofer with my Vizio soundbar?

Most Vizio soundbars are designed to pair only with Vizio subwoofers. Third-party subs from other brands typically use different wireless protocols and will not connect. If you want to add bass to your Vizio soundbar, you will need a sub made by Vizio that matches your soundbar model or is listed as compatible in the manual.