The pairing process depends on your soundbar model and whether it has Bluetooth or a wireless receiver

Most Vizio soundbars pair with their matching subwoofers automatically when you power them on together for the first time. If that does not happen, or if your subwoofer was separated from the soundbar, you can reconnect them using either a wireless pairing button or your soundbar's remote control. The exact steps vary depending on whether your Vizio soundbar uses Bluetooth, a 2.4 GHz wireless connection, or a physical receiver module.

Before you start, make sure both the soundbar and subwoofer are plugged in and powered on. Keep them within 10 feet of each other during pairing. If you have already paired them before and they are not connecting now, a power reset often solves the problem.

Key Takeaways

  • Most Vizio subwoofers pair automatically when powered on together, but manual pairing uses either a button on the back of the subwoofer or your soundbar's remote control.
  • Wireless pairing typically takes 30 seconds to 2 minutes, and you will see a light on the subwoofer change color or stop blinking when the connection is complete.
  • If pairing fails, power off both devices, wait 30 seconds, and power them back on in this order: subwoofer first, then soundbar.
  • Some Vizio soundbars require you to hold a pairing button for 3 to 5 seconds until a light flashes, signaling the soundbar is ready to connect.

Automatic pairing when you first set up your soundbar

When you unbox a new Vizio soundbar and subwoofer sold as a pair, they often come already linked at the factory. Plug in the subwoofer first and let it power up completely—this usually takes 10 to 15 seconds. Then plug in the soundbar and turn it on. The two devices should find each other automatically within 30 seconds to 2 minutes.

You will know pairing is successful when the light on the front or back of the subwoofer stops blinking and stays solid, or changes from red to blue or green depending on your model. If the light keeps blinking after 3 minutes, the devices did not pair, and you will need to try manual pairing instead.

Manual pairing using the subwoofer's pairing button

Most Vizio subwoofers have a small pairing button on the back panel, usually labeled "Pair" or marked with a wireless symbol. To use it, first make sure both the soundbar and subwoofer are powered on and within 10 feet of each other. Press and hold the pairing button on the subwoofer for 3 to 5 seconds until the light on the subwoofer begins to flash rapidly—usually red or blue.

Once the subwoofer light is flashing, you have about 30 seconds to initiate pairing from the soundbar. On most models, you press and hold the pairing button on the soundbar's remote control, or you navigate to a pairing menu in the soundbar's settings using the remote. Check your soundbar's manual for the exact button or menu location, as this varies by model year.

The subwoofer light will stop flashing and turn solid when the connection is complete. This usually happens within 30 seconds. If the light goes back to a slow blink or turns off, the pairing did not work, and you should try again from the beginning.

Pairing through your soundbar's remote control or menu

Some newer Vizio soundbars do not have a physical pairing button and instead use the remote control to start the pairing process. Press the Menu or Settings button on your remote, then look for an option labeled "Pairing," "Bluetooth," "Wireless," or "Subwoofer." Select it and follow the on-screen prompts, which usually ask you to hold a button on the subwoofer or wait for the soundbar to search for nearby devices.

If your soundbar has a display panel on the front, you may see a message like "Pairing Mode" or "Searching for Subwoofer" appear on the screen. This means the soundbar is ready to connect. Make sure the subwoofer's pairing button is pressed or its light is flashing, and the connection should complete within 1 to 2 minutes.

What to do if the subwoofer will not pair

If you have tried pairing multiple times and the subwoofer still will not connect, start with a power reset. Unplug both the soundbar and subwoofer from the wall outlet and wait 30 seconds. Plug in the subwoofer first and let it fully power up, then plug in the soundbar. This clears any temporary connection errors and often solves pairing problems.

If the reset does not work, check that both devices are within 10 feet of each other and that there are no large metal objects or microwave ovens between them—these can interfere with the wireless signal. Also verify that you are using the correct pairing button or menu for your specific soundbar model. Vizio makes many different soundbar lines, and the pairing method can differ between them. Consult your soundbar's manual or Vizio's support website to confirm you are following the right steps for your model number.

If the subwoofer still will not pair after a reset and you have confirmed the correct pairing method, the wireless receiver in either device may be faulty. Contact Vizio support with your model numbers and a description of what you have tried. They can determine whether the subwoofer or soundbar needs to be replaced.

Reconnecting a subwoofer that was previously paired

If your subwoofer was paired with the soundbar before but has stopped working, it may have lost its connection. This can happen if the devices were unplugged at different times, moved far apart, or if there was a power surge. The fastest fix is to power cycle both devices: unplug the subwoofer, wait 10 seconds, and plug it back in. Then unplug the soundbar, wait 10 seconds, and plug it back in. They should reconnect automatically within 1 to 2 minutes.

If automatic reconnection does not work, follow the manual pairing steps above using either the subwoofer's pairing button or your soundbar's remote control. The devices should remember each other and reconnect more quickly the second time.

Frequently Asked Questions

How long does it take to pair a Vizio subwoofer with a soundbar?

Pairing usually takes 30 seconds to 2 minutes. If nothing has happened after 3 minutes, the pairing has failed and you should try again. Make sure both devices are powered on and within 10 feet of each other.

What does the light on the subwoofer mean during pairing?

A rapidly flashing light (usually red or blue) means the subwoofer is in pairing mode and waiting to connect. A solid light means the connection is complete. A slow blink usually means the subwoofer is powered on but not paired, or the connection was lost.

Can I pair a Vizio subwoofer with a non-Vizio soundbar?

Vizio subwoofers are designed to work with Vizio soundbars and use proprietary wireless technology. They may not pair with soundbars from other brands. If you have a different brand of soundbar, check its manual to see which subwoofers are compatible.

Do I need to pair the subwoofer every time I turn it on?

No. Once paired, the subwoofer and soundbar will reconnect automatically each time you power them on, as long as they are within range and the connection was not lost. You only need to pair them manually if the connection drops or if you are setting them up for the first time.

What if my subwoofer pairs but produces no sound?

Check that the soundbar's volume is not muted or set very low. Also verify that the subwoofer's volume dial is turned up—most Vizio subwoofers have a volume control on the back or bottom. If sound still does not come through, try unplugging both devices, waiting 30 seconds, and plugging them back in.