The quickest way to pair your LG soundbar

To put most LG soundbars in pairing mode, hold the Bluetooth button on the remote or the soundbar itself for 3 to 5 seconds until you see a blue light flash or blink on the front panel. That blinking light means the soundbar is ready to connect to your phone, TV, or other device. The pairing window usually stays open for about 2 to 3 minutes, so start searching for the soundbar on your device's Bluetooth menu right away.

If your soundbar does not have a dedicated Bluetooth button, look for a button labeled Source, Input, or a symbol that looks like two curved lines (the Bluetooth icon). Press and hold that button instead. Some newer LG models also let you enter pairing mode through the LG Sound Bar app on your phone, which can be easier if you have already installed it.

Key Takeaways

  • Hold the Bluetooth button on your remote or soundbar for 3 to 5 seconds until the front light blinks blue.
  • The soundbar stays in pairing mode for about 2 to 3 minutes, so search for it on your device when ready.
  • If there is no Bluetooth button, try the Source or Input button instead, or use the LG Sound Bar app.
  • Once paired, your soundbar will remember that device and connect automatically the next time it is turned on.

Finding the Bluetooth button on your remote

LG soundbar remotes vary by model, but the Bluetooth button is usually near the top or middle of the remote, sometimes grouped with other connection buttons. It may be labeled BT, Bluetooth, or show the Bluetooth symbol. If you cannot find it, check the back or underside of the remote — some models print button labels there.

If you have lost your remote, you can still enter pairing mode using the buttons on the soundbar itself. Most LG soundbars have a row of touch-sensitive buttons or physical buttons on the top or front panel. The Bluetooth button is usually one of the first three buttons from the left.

Pairing mode on the soundbar itself

If you prefer not to use the remote, locate the buttons on your soundbar's top or front panel. Press and hold the Bluetooth button (or Source/Input button) directly on the soundbar for 3 to 5 seconds. You should see the same blue blinking light appear on the front panel, indicating pairing mode is active.

Some LG soundbars also have a small reset button or pairing button on the back panel, usually recessed so you need a paperclip or pen to press it. Check your soundbar's manual or the back panel for any small holes or buttons labeled Pairing or Reset. Holding this button for a few seconds will also trigger pairing mode.

Using the LG Sound Bar app to enter pairing mode

If you have already installed the LG Sound Bar app on your phone, you can use it to put the soundbar in pairing mode without touching the remote. Open the app, go to the settings or connection menu, and look for an option that says Bluetooth Pairing, Add Device, or Connect New Device. Tap that option, and the soundbar will enter pairing mode automatically.

This method works best if your soundbar is already connected to your home Wi-Fi, because the app communicates with the soundbar over your network. If the soundbar is not yet on your Wi-Fi, use the remote or the buttons on the soundbar itself to enter pairing mode instead.

What to do if the soundbar will not enter pairing mode

If the blue light does not appear after holding the button, try these steps in order. First, make sure the soundbar is powered on — some models go into a low-power sleep mode and may not respond to button presses. Press the power button on the remote or soundbar to wake it up, then try the Bluetooth button again.

Second, check that you are holding the button long enough. Some LG models require a full 5 seconds of continuous pressure, not just a quick tap. Count slowly to five while holding the button down. If the soundbar still does not respond, try a different button — you may have the wrong one. Consult your soundbar's manual or look up your specific model number on LG's website to confirm which button controls Bluetooth pairing.

If nothing works, the soundbar may need a factory reset. Unplug it from power for 30 seconds, then plug it back in and wait for it to fully boot up. Once the lights stabilize, try entering pairing mode again. If the soundbar still will not pair after a reset, contact LG support — the Bluetooth module may need repair.

Connecting your device once the soundbar is in pairing mode

Once you see the blue blinking light, open the Bluetooth settings on your phone, tablet, or TV. Look for a device called LG Soundbar, LG SoundBar, or a model number like LG SN6Y (the exact name depends on your model). Tap or select that device from the list.

Your device may ask you to confirm the pairing or enter a PIN. Most LG soundbars do not require a PIN — just confirm the pairing when prompted. Once connected, the blue light on the soundbar will stop blinking and stay solid, or turn off entirely. Your device is now paired and should automatically connect to the soundbar whenever both are powered on and in range.

Pairing multiple devices to the same soundbar

LG soundbars can remember multiple devices, but they typically connect to only one at a time. To pair a second device, put the soundbar back into pairing mode using the same steps — hold the Bluetooth button for 3 to 5 seconds. Then search for and select the soundbar on your new device's Bluetooth menu.

Once the second device is paired, you can switch between them by disconnecting one and connecting the other through your device's Bluetooth settings. Some newer LG models support faster switching if both devices are in range, but you still cannot play audio from two devices simultaneously.

Frequently Asked Questions

How long does the soundbar stay in pairing mode?

Most LG soundbars stay in pairing mode for 2 to 3 minutes after you press the Bluetooth button. If your device does not find the soundbar within that window, the soundbar will exit pairing mode automatically. You will need to press the Bluetooth button again to re-enter pairing mode.

Why is the blue light blinking but my device cannot find the soundbar?

Make sure your device's Bluetooth is turned on and set to discoverable mode. Move your phone or device closer to the soundbar — Bluetooth range is usually 30 feet, but walls and interference can reduce that. If you still cannot see the soundbar, try restarting your device's Bluetooth by turning it off and back on, then search again.

Can I pair my soundbar to my TV and phone at the same time?

No, the soundbar can only play audio from one device at a time. However, it can remember both devices. To switch between them, disconnect one through its Bluetooth settings and manually connect the other. Some LG soundbars will automatically switch to a TV if it turns on while the phone is connected.

What if I forgot which device my soundbar is paired to?

Perform a factory reset by unplugging the soundbar for 30 seconds, then plugging it back in. This clears all paired devices. Once it restarts, put it back into pairing mode and pair it to the device you want to use.

Does the soundbar stay in pairing mode if I turn it off?

No, turning off the soundbar exits pairing mode when ready. You will need to turn it back on and hold the Bluetooth button again to re-enter pairing mode.